ICRF 2026 - 5th International Conference on INGOT CASTING, ROLLING & FORGING

Name: ICRF 2026 - 5th International Conference on INGOT CASTING, ROLLING & FORGING
Start: 2026-10-13T08:00:00+02:00
End: 2026-10-15T13:00:00+02:00
Location: Hotel Caesius Terme & SPA Resort - Bardolino - Verona

13–15 Oct 2026

Hotel Caesius Terme & SPA Resort - Bardolino - Verona

Europe/Rome timezone

Organising secretariat

Author List

Tuomas Alatarvas (Process Metallurgy Research Unit, University of Oulu, Finland)
- Co-author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Izaz Ali
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Igor Alimov
- Co-author in Digital Twin–Based Simulation Chain for Rail Manufacturing: Roll Pass Design, Head Hardening, and Straightening
Marco Alloni (Prosimet S.p.A.)
- Author in STAINLESS STEEL AND SPECIAL ALLOYS INGOTS. WHICH CASTING POWDER?
Ettore Anelli (Franchini Acciai SpA)
- Author in Metallurgical Design of Forged Pipes and Connecting Parts
Marco Antonello
- Co-author in Discrete Particle Modelling of Inclusion Transport and Localization in Bottom-Poured Ingots
Pietro Appiani
- Author in Qualification of Heat Treatment Cycle for a Forged blank in Ti-6Al-4V
Israel Arellano
- Co-author in Advances in the Production of Ultra-Clean Specialty Steels: Recent Strategies for Hydrogen Removal, Total Oxygen Reduction, and Nonmetallic Inclusion Control
- Co-author in Extending SBQ Rolling to Large Diameters: Stainless and Special Steels from 3.75 to 16 inches at FRISA Steel
Raquel Arias Perez (Sidenor I+D)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Norbert ASAMER (BRAUN Maschinenfabrik GmbH)
- Author in LATEST DEVELOPMENTS IN ABRASIVE CUTTING AND GRINDING OF LARGE-SCALE FORGINGS
Alireza Atf (K1-MET)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Silvia Barella
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Silvia Barella (Politecnico di Milano)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Shahab Bazri (Dipartimento di Meccanica - Politecnico di Milano)
- Co-author in Role of Manganese and Sulphur Segregation in Hydrogen-Assisted Cracking and MnS Formation in Large Forged Steel Ingots
Ali Beigzadeh (Department of Industrial Engineering, University of Padova)
- Co-author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
Noura BELAICHA (Mines Paris Cemef, France)
- Author in A Multiphysics Front-Tracking Model for Thermochemical Evolution of Casting Powders during Ingot Casting
Marco Belfi
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Marco Belfi (Politecnico di Milano)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Vitaliy Belugin
- Co-author in Digital Twin–Based Simulation Chain for Rail Manufacturing: Roll Pass Design, Head Hardening, and Straightening
Francesco Bergamaschi (ASONEXT SpA Società Benefit)
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Christian Bernhard (Montanuniversität Leoben)
- Co-author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Lorenzo Bertera
- Author in Qualification of Heat Treatment Cycle for a Forged blank in Ti-6Al-4V
Luca Bertoldi (Sales Director)
- Author in Advanced Energy-Saving Technologies in Open Die Forging Presses: A Case Study on Press Upgrade
Stefano Bertoni (ECOTRE Valente srl)
- Co-author in ESR simulation: prediction of quality and grain size for nickel based ingot
CHAITANYA BHANU
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Alberto Bianco (Inteco rolling mill technolgies SRL)
- Co-author in Two-Stage Descaling at PSM Plate Mill for High-Alloy Plates
Nikolay Biba
- Co-author in Digital Twin–Based Simulation Chain for Rail Manufacturing: Roll Pass Design, Head Hardening, and Straightening
Ulrich Biebricher
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Benedikt Blitz (SMR Premium GmbH)
- Author in 'Update on Special Steels, Titanium and Powder Metallurgy’
Jörg Blum (DANGO & DIENENTHAL Maschinenbau GmbH)
- Author in Revitalizing Lifecycle Support for Heavy Forging Equipment – Modernization and Upgrade Strategies for Existing Manipulator Systems
Miguel Bocanegra Galvan (FRISA)
- Co-author in Hot workability of Ni-Fe high-temperature alloy.
Ovidiu Bogdan (Industrial Soft)
- Author in Using AI models to mould design, predict segregation, porosity and CET zone in steel ingots
Alberto Bonetti (Arvedi Acciai Speciali Terni - Divisione Fucine, Via B. Brin, 05100 Terni, Italy)
- Co-author in Effect of heat treatments on a "lean" chemical steel composition for cylinders
Gianpietro Bontempi (Fonderie di Torbole s.r.l.)
- Author in AI-Powered decision support system for early defects prediction in cast-iron products
Giacomo Bottoli
- Author in Hybrid Generative-Neurosymbolic AI for Explainable Quality Certification in Industrial Forging
Matilde Breda (RINA Consulting - CSM Spa)
- Co-author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
Daniele Brunelli (Associazione Italiana di Metallurgia)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
Christian Buchmaier (Inteco melting and casting technologies GmbH)
- Co-author in Vacuum Ingot Casting in the Modern Era: Plant Concepts, Process Optimization, and Performance
Sara Busolini (Acciaierie Bertoli Safau)
- Author in Transition to synthetic casting fluxes in ingot casting area, Acciaierie Bertoli Safau case study: analysis of process variables and qualitative impact following the fly ash supply crisis.
John Campbell (University of Birmingham, UK)
- Author in Improving ingot casting technology
Andrea Canal
- Co-author in Danieli’s QSP-DUE®: Unlimited freedom for green HRC production
Riccardo Carli (Prosimet SpA)
- Co-author in STAINLESS STEEL AND SPECIAL ALLOYS INGOTS. WHICH CASTING POWDER?
Efisio Carutti
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
- Co-author in Revitalizing Lifecycle Support for Heavy Forging Equipment – Modernization and Upgrade Strategies for Existing Manipulator Systems
Eleonora Carutti
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Rene Cerda Rojas (FRISA)
- Co-author in Hot workability of Ni-Fe high-temperature alloy.
Simone Cerza (RINA spa)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
Qifa Chen (College of Mechanical Engineering. Taiyuan University of Technology)
- Author in Thickness-Dependent Annealing Response and Microstructure–Property Evolution of 4J36 Invar Alloy during Ultrathin Processing
Ding chuan (TYUT)
- Author in Three-Roll Skew Rolling of Titanium/Steel Bimetallic Composite Tubes: Simulation and Experiment
Valentina Colla (Scuola Superiore Sant'Anna)
- Author in AI-Powered decision support system for early defects prediction in cast-iron products
Andrea Colombini (Danieli & Co S.p.A)
- Author in Danieli’s QSP-DUE®: Unlimited freedom for green HRC production
Stefano Colosio (Franchini Acciai SpA)
- Co-author in Metallurgical Design of Forged Pipes and Connecting Parts
Riccardo Conte (Danieli & Co S.p.A)
- Author in Danieli’s QSP-DUE®: Unlimited freedom for green HRC production
Marcus Crabbe (Sheffield Forgemasters)
- Co-author in Development of Industrial Processing Models for Prediction of Micro-segregation in Advanced Fusion Steels
Iñigo Crespo (TECNALIA, Basque Research and Technology Alliance (BRTA))
- Author in Data-Driven Regression Modeling for Energy Efficiency Optimization in Industrial Induction Heating Processes
- Co-author in Efficient electrification of round steel bars heating during rolling process
Gianluca Dall'Osto (Politecnico di Milano)
- Co-author in Role of Manganese and Sulphur Segregation in Hydrogen-Assisted Cracking and MnS Formation in Large Forged Steel Ingots
Edoardo D'Amanzo (Rina Consulting - Centro Sviluppo Materiali)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
- Co-author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
Prosenjit Das (Indian Institute of Science Bangalore, Karnataka, India-560012)
- Co-author in Effect of Cu addition on microstructure, mechanical properties, and Heat treatment response of in situ Al-15Mg2Si-4.5Si composite
- Co-author in Experimental and Numerical Investigation of Novel Al–Cenosphere–MWCNT Composite Foams under Varying Strain Rate
Aleksandar Dejanovic (Pahnke Systems)
- Author in Next-Generation Metal Forming: Utilizing the PMSD as a Universal Drive for Hydraulic Presses
Michele De Santis (Rina Consulting - Centro Sviluppo Materiali SpA)
- Author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
- Author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Stefano Dettori (Scuola Superiore Sant'Anna)
- Author in AI-Powered decision support system for early defects prediction in cast-iron products
Taieb Diederichs (Pahnke Systems)
- Author in Next-Generation Metal Forming: Utilizing the PMSD as a Universal Drive for Hydraulic Presses
Antonio Di Mauro (Nippon Sanso Industrial)
- Author in THE INDUSTRIAL IMPLEMENTATION OF A BURNER CAPABLE TO OPERATE IN PREHEATED AIR-FUEL MODE, OXY-FUEL MODE OR PREHEATED AIR-OXY-FUEL MODE
Orlando Di Pietro (RINA Consulting - Centro Sviluppo Materiali SpA)
- Co-author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Andrea Di Schino (University of Perugia)
- Author in Effect of heat treatments on a "lean" chemical steel composition for cylinders
Tadej Dobravec (University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Christof Dratner
- Author in Advanced Copper Solutions for Remelting Technologies
jinlei Du
- Co-author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
WangZhe Du
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Nora Egido Perez (Sidenor I+D)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Andrew Elliott (CONSARC - An Inductotherm Group Company)
- Co-author in White Spot Origins, their Impact on Critical Components, and a Pathway for Prevention using VARmetric
Mikael Ersson (KTH Royal Institute of Technology)
- Author in Minimization of mould flux entrapment during ingot casting through CFD modelling
Julio Espinoza Jaimes
- Author in Advances in the Production of Ultra-Clean Specialty Steels: Recent Strategies for Hydrogen Removal, Total Oxygen Reduction, and Nonmetallic Inclusion Control
- Co-author in Extending SBQ Rolling to Large Diameters: Stainless and Special Steels from 3.75 to 16 inches at FRISA Steel
Ben Evans (UKAEA)
- Co-author in Development of Industrial Processing Models for Prediction of Micro-segregation in Advanced Fusion Steels
Wanwan Fan (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Research on Pulsed Current-assisted Rolling Forming and Microstructure–Properties of Pure Titanium Ultra-thin Strips
Xiaofei Fang (Yanshan University)
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Andrea Febbrari (Italfond spa)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
Roberto Fernandez Martinez (University of the Basque Country)
- Author in Data-Driven Regression Modeling for Energy Efficiency Optimization in Industrial Induction Heating Processes
Roberto Fernandez Martinez (University of the Basque Country UPV/EHU)
- Co-author in Efficient electrification of round steel bars heating during rolling process
Angelo Ferranti (Contec Industry)
- Author in Water Footprint Reduction in the Metallurgical Sector through Oily Emulsion Reuse and the WASM Method
Andrei Filatov
- Author in Weldability Investigation of Industrial Heavy Plate Steels for Pressure Vessels Designed for Mobile CO₂ Storage Applications
Laura Forlani (Fonderie di Torbole s.r.l.)
- Author in AI-Powered decision support system for early defects prediction in cast-iron products
Joakim Forslund (Björneborg Steel AB)
- Author in Industrial trials with renewable dimethyl ether as fuel in an ingot reheating furnace
Henrik Franz (ALD Vacuum Technologies Gmbh, Hanau, Germany)
- Author in PLASMA – Value add for metallurgical refining in VID-Processes
Maria Freda (Rina Consulting - CSM)
- Author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
Paixian Fu (Institute of Metal Research, Chinese Academy of Sciences)
- Author in Controlling A‑Segregation in a 100‑Ton Hollow Steel Ingot via Liquid Nitrogen‑Air Core Cooling
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Lun Fu (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Three-Roll Skew Rolling of Titanium/Steel Bimetallic Composite Tubes: Simulation and Experiment
Hiroshi Fukaya (Department of Engineering, Tohoku University)
- Co-author in Experimental determination of partition coefficients considering peritectic reactions and application to macro-segregation simulation in a large steel ingot
Alexis Gaillac (Framatome)
- Author in Intelligent surrogate model for the calibration of Hansel-Spittel flow stress model
Charles-André GANDIN (MinesParis - PSL - CEMEF)
- Co-author in A Multiphysics Front-Tracking Model for Thermochemical Evolution of Casting Powders during Ingot Casting
PSS GANESH
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Jianjun Gao (CFHI)
- Co-author in Features of the solidification of large ESR hollow ingots
Zhihui Gao (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Three-Roll Skew Rolling of Titanium/Steel Bimetallic Composite Tubes: Simulation and Experiment
Marcello Gelfi (University of Brescia)
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Babak Ghazian (Swerim AB)
- Author in Industrial trials with renewable dimethyl ether as fuel in an ingot reheating furnace
Mattia Gianola
- Author in Qualification of Heat Treatment Cycle for a Forged blank in Ti-6Al-4V
UDAY SHANKER GOEL (TATA STEEL INDIA)
- Author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Eugene Goli-Oglu (NLMK DanSteel)
- Author in Weldability Investigation of Industrial Heavy Plate Steels for Pressure Vessels Designed for Mobile CO₂ Storage Applications
Arianna Gotti (Trasnvalor SA)
- Author in Discrete Particle Modelling of Inclusion Transport and Localization in Bottom-Poured Ingots
Matteo Gregori (RINA spa)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
- Author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
Christine Gruber (K1-MET)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Andrea Gruttadauria
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
andrea gruttadauria (politecnico di milano)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Gildas GUILLEMOT (MinesParis - PSL - CEMEF)
- Co-author in A Multiphysics Front-Tracking Model for Thermochemical Evolution of Casting Powders during Ingot Casting
SHUO GUO (Policlinico di Milano)
- Author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
BaoQi Guo
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Shuo Guo
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
SHUO GUO (Yanshan University)
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Gustav Häggström (Swerim AB)
- Author in Industrial trials with renewable dimethyl ether as fuel in an ingot reheating furnace
- Co-author in Surrogate modeling of the cogging process in open die forging simulation
Esraa Hamdy (Swerim AB)
- Author in Industrial trials with renewable dimethyl ether as fuel in an ingot reheating furnace
Chenyang Han (Department of Industrial Engineering, University of Padova)
- Co-author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
Umut Hanoglu (University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Daniel Haster Olsson (Uddeholm AB)
- Author in Characterization of mould flux-originated non-metallic inclusions in ingot casting
- Author in Minimization of mould flux entrapment during ingot casting through CFD modelling
Zhiqiang He (Yanshan University)
- Author in A CAD/CAE Integrated Simulation Method for the Hydraulic System of Forging Presses Based on Model Parameter Mapping
Milan Hnizdil (Brno University of Technology, Heat transfer and fluid flow laboratory, Faculty of Mechanical Engineering)
- Author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Harald Holzgruber (INTECO melting and casting technologies GmbH)
- Co-author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Thomas Holzgruber
- Author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Qingxue Huang (Taiyuan University of Technology)
- Author in Investigation on the crack resistance and strength–ductility synergy of Ta-12W alloy via corrugated–flat warm rolling
Xuechi Huang (Northeastern University)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Xiaoxia Ji (CFHI)
- Co-author in Features of the solidification of large ESR hollow ingots
Chenxi JI
- Co-author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
Pello Jimbert (University of the Basque Country UPV/EHU)
- Author in Data-Driven Regression Modeling for Energy Efficiency Optimization in Industrial Induction Heating Processes
- Author in Efficient electrification of round steel bars heating during rolling process
Jane Jönsson Valencik (Ovako AB)
- Author in Minimization of mould flux entrapment during ingot casting through CFD modelling
Xiuhong Kang (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
- Co-author in Controlling A‑Segregation in a 100‑Ton Hollow Steel Ingot via Liquid Nitrogen‑Air Core Cooling
Andrey Karasev (KTH Royal Institute of Technology)
- Author in Characterization of mould flux-originated non-metallic inclusions in ingot casting
Hamid Reza Karimi (Politecnico di Milano)
- Author in A CAD/CAE Integrated Simulation Method for the Hydraulic System of Forging Presses Based on Model Parameter Mapping
Masaru Kato (Daido Steel Co., Ltd.)
- Co-author in AI-Driven Surface Inspection Enabling Automated Grinding of Forged Ingots
Dieter Kaufhold
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Saku Kaukonen (Sapotech Oy)
- Co-author in AI-Driven Surface Inspection Enabling Automated Grinding of Forged Ingots
Sailesh Kesavan (SWERIM)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
DİDEM KILIÇ OĞUROL (KARDEMİR ÇELİK SANAYİ AŞ.)
- Author in Improvement of Product Quality and Production Efficiency through a Profile Straightening System
Paul King (Ampere Scientific)
- Co-author in White Spot Origins, their Impact on Critical Components, and a Pathway for Prevention using VARmetric
Eemil Kiviahde (Sapotech Oy)
- Co-author in AI-Driven Surface Inspection Enabling Automated Grinding of Forged Ingots
Frederik Knauf (SMS group GmbH)
- Co-author in Latest developments in radial forging technology for titanium and nickel alloys
Marc Koester (BFI)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Dietmar Kolbeck
- Co-author in Advanced Copper Solutions for Remelting Technologies
Jan Kominek (Brno University of Technology, Heat transfer and fluid flow laboratory, Faculty of Mechanical Engineering)
- Co-author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Miha Kovačič (Štore Steel and University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
CEYHUN KOZAK (KARDEMİR ÇELİK SANAYİ AŞ.)
- Author in Improvement of Product Quality and Production Efficiency through a Profile Straightening System
Makoto Kubo (Material technology laboratory, The Japan Steel Works, Ltd.)
- Co-author in Experimental determination of partition coefficients considering peritectic reactions and application to macro-segregation simulation in a large steel ingot
Ravi Kumar (Indian Institute of Science, Bangalore, Karnataka, India-560012)
- Author in Experimental and Numerical Investigation of Novel Al–Cenosphere–MWCNT Composite Foams under Varying Strain Rate
AMIT KUMAR
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Bastian Küthe (DANGO & DIENENTHAL Maschinenbau GmbH (Technical Expert))
- Co-author in Revitalizing Lifecycle Support for Heavy Forging Equipment – Modernization and Upgrade Strategies for Existing Manipulator Systems
Arianna Lamperini (Arvedi Acciai Speciali Terni - Divisione Fucine, Via B. Brin, 05100 Terni, Italy)
- Co-author in Effect of heat treatments on a "lean" chemical steel composition for cylinders
Thomas Leitner (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Stefan Lemke
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Ruowei Li (Yanshan university)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
De Li (Yanshan university)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
Haibo Li
- Co-author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
hongxia Li
- Co-author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
Ruowei Li
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
De Li
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Baokuan Li
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Dianzhong Li (Institute of Metal Research,Chinese Academy of Sciences)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
- Co-author in Controlling A‑Segregation in a 100‑Ton Hollow Steel Ingot via Liquid Nitrogen‑Air Core Cooling
Peng Li (Taiyuan University of Technology)
- Author in Investigation on the crack resistance and strength–ductility synergy of Ta-12W alloy via corrugated–flat warm rolling
De Li (Politecnico di Milano)
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Ruowei Li (Politecnico di Milano)
- Author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Tord Lindberg (Flogas AB)
- Author in Industrial trials with renewable dimethyl ether as fuel in an ingot reheating furnace
Alessandra Lissignoli
- Author in Discrete Particle Modelling of Inclusion Transport and Localization in Bottom-Poured Ingots
Caiyi Liu (Yanshan university)
- Author in A CAD/CAE Integrated Simulation Method for the Hydraulic System of Forging Presses Based on Model Parameter Mapping
- Author in Thickness-Dependent Annealing Response and Microstructure–Property Evolution of 4J36 Invar Alloy during Ultrathin Processing
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Zhongqiu Liu (northeastern University)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Hanghang Liu (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Hongwei Liu (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
- Co-author in Controlling A‑Segregation in a 100‑Ton Hollow Steel Ingot via Liquid Nitrogen‑Air Core Cooling
Yuanming Liu (Taiyuan University of Technology)
- Author in Investigation on the crack resistance and strength–ductility synergy of Ta-12W alloy via corrugated–flat warm rolling
Caiyi Liu
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Qingguo Liu (University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Qi Liu
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Samantha Locci (Arvedi Acciai Speciali Terni - Divisione Fucine, Via B. Brin, 05100 Terni, Italy)
- Co-author in Effect of heat treatments on a "lean" chemical steel composition for cylinders
Ghislain Locqueneux (Transvalor SA)
- Co-author in Discrete Particle Modelling of Inclusion Transport and Localization in Bottom-Poured Ingots
Johan Lönnqvist (Swerim AB)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Yu-Chiao Lu (KTH Royal Institute of Technology)
- Author in Characterization of mould flux-originated non-metallic inclusions in ingot casting
- Author in Minimization of mould flux entrapment during ingot casting through CFD modelling
Shenghao Lu (Shijiazhuang Construction Project Review and Evaluation Center)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
Shenghao Lu
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Shenghao Lu (Shijiazhuang Construction Project Review and Evaluation Center)
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Mikhail Lukin (Linde GmbH)
- Co-author in Heating Ingots with Oxyfuel and Hydrogen before Rolling and Forging
Yanzhao Luo (Shougang Research Institute of Technology)
- Author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
Chunhui Luo (Swerim AB)
- Author in An ICME‑Enabled Digital Framework for Modeling of Microstructure Evolution during Industrial Steel Casting and Forging
ZhaoChen Ma
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Yiwei Ma (CFHI)
- Co-author in Features of the solidification of large ESR hollow ingots
Xiaobao Ma (Taiyuan University of Technology)
- Author in Investigation on the crack resistance and strength–ductility synergy of Ta-12W alloy via corrugated–flat warm rolling
Franco Macci (RINA Consulting - CSM Spa)
- Author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
- Co-author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Dario Magni
- Author in Concept to Operation: Digital Twin Integration and FEM Simulation in Horizon
Georg Maier (voestalpine Böhler Edelstahl GmbH & Co KG)
- Author in LEVERAGING DOWNSAMPLING AND EXPERT SYSTEMS FOR DATA-DRIVEN PROCESS OPTIMIZATION IN THE FORGING INDUSTRY
Takahiro Makiyama (Institute of Technologists)
- Author in Effects of Axial Feed Direction on Forged Shape in Mandrel-Less Incremental Forging of Circular Variable-Cross-Section Tube Ends
Mikael Malmström (Swerim AB)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Pavel Maltsev
- Co-author in Digital Twin–Based Simulation Chain for Rail Manufacturing: Roll Pass Design, Head Hardening, and Straightening
Anna Mantelli (ASONEXT SpA Società Benefit)
- Author in Numerical simulation of carbon macrosegregation in large steel ingots
Carlo Mapelli (Dipartimento di Meccanica - Politecnico di Milano)
- Author in Role of Manganese and Sulphur Segregation in Hydrogen-Assisted Cracking and MnS Formation in Large Forged Steel Ingots
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Carlo Mapelli
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Matteo Marten-Perolino (AIM)
- Author in Manufacturing and Remelting Technologies
Kersten Marx (BFI)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Boštjan Mavrič (University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Daniel McCulley (Ampere Scientific)
- Co-author in White Spot Origins, their Impact on Critical Components, and a Pathway for Prevention using VARmetric
Lev Medovar (CFHI, UDUNT)
- Co-author in ELECTROSLAG REMELTING: AN ADDITIVE APPROACH TO LARGE COMPOSITIONALLY HOMOGENEOUS AND COMPOSITE COMPONENTS MANUFACTURING
Lev Medovar (Paton Welding Institute)
- Author in Features of the solidification of large ESR hollow ingots
Michele Menga (Italfond spa)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
Massimo Milone (RINA Consulting - Centro Sviluppo Materiali SpA)
- Co-author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Katia Mocellin (Mines Paris PSL - Armines)
- Author in Intelligent surrogate model for the calibration of Hansel-Spittel flow stress model
Davide Mombelli (Politecnico di Milano - Dipartimento di Meccanica)
- Co-author in Role of Manganese and Sulphur Segregation in Hydrogen-Assisted Cracking and MnS Formation in Large Forged Steel Ingots
Christoph Morche
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Josh Motley (Ampere Scientific)
- Co-author in White Spot Origins, their Impact on Critical Components, and a Pathway for Prevention using VARmetric
Katarina Mramor (University of Ljubljana, Faculty of Mechanical Engineering)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Mohammed Kedir Mustofa (Indian Institute of Science Bangalore, Karnataka, India-560012)
- Author in Effect of Cu addition on microstructure, mechanical properties, and Heat treatment response of in situ Al-15Mg2Si-4.5Si composite
Alberto Nardini
- Author in Billet Welding Machine – Latest development description and real application results
- Author in Intelligent heat treatment in line applications for hot rolling process
- Co-author in Concept to Operation: Digital Twin Integration and FEM Simulation in Horizon
Michael Naumann
- Co-author in PLASMA – Value add for metallurgical refining in VID-Processes
Johannes Neumüller (Materials Center Leoben Forschung GmbH (MCL))
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Thanh Chung Nguyen (Framatome)
- Author in Intelligent surrogate model for the calibration of Hansel-Spittel flow stress model
Michael Nicoli
- Co-author in Discrete Particle Modelling of Inclusion Transport and Localization in Bottom-Poured Ingots
Hui Niu (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Three-Roll Skew Rolling of Titanium/Steel Bimetallic Composite Tubes: Simulation and Experiment
Julius Norrena (University of Oulu)
- Co-author in Physics Based Modelling as an Enabler for Machine Learning Defect Prevention in Casting
Simone Nortilli (Contec Industry)
- Author in Water Footprint Reduction in the Metallurgical Sector through Oily Emulsion Reuse and the WASM Method
Stefan Pahnke (Pahnke Systems)
- Author in Next-Generation Metal Forming: Utilizing the PMSD as a Universal Drive for Hydraulic Presses
Ferruccio Pastorino
- Author in Ingot uphill casting defect potential reasons and forecast by different approach and analysis.
SANJAY PATEL
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Yan Peng (Yanshan University)
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Yan Peng
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Mirko Perlini
- Author in Qualification of Heat Treatment Cycle for a Forged blank in Ti-6Al-4V
Michal Pohanka (Brno University of Technology, Heat transfer and fluid flow laboratory, Faculty of Mechanical Engineering)
- Co-author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Annalisa Pola (University of Brescia)
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Luca Premoli (GIVA spa)
- Author in Modeling Remelting and Solidification: An OpenFOAM-based Approach for ESR and VAR Processes
ANIL KUMAR PUJARI
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Shaocong Qi (Key Laboratory of Advanced Forging & Stamping Technology and Science，Ministry of Education of China，Yanshan University; School of Mechanical Engineering, Yanshan University; National & Local Joint Engineering Research Center for Advanced Manufacture Forming Technology and Equipment，Yanshan University)
- Co-author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
Oswaldo Ramirez
- Co-author in Extending SBQ Rolling to Large Diameters: Stainless and Special Steels from 3.75 to 16 inches at FRISA Steel
Oswaldo Ramírez
- Co-author in Advances in the Production of Ultra-Clean Specialty Steels: Recent Strategies for Hydrogen Removal, Total Oxygen Reduction, and Nonmetallic Inclusion Control
Pavel E Ramirez Lopez (SWERIM AB)
- Co-author in Current Practices, Challenges and Industrial Perspectives in Modelling of Casting Processes
Rao Rashid (PSM)
- Co-author in Two-Stage Descaling at PSM Plate Mill for High-Alloy Plates
Davide Razzari (Linde Gas Italia SRL)
- Co-author in Heating Ingots with Oxyfuel and Hydrogen before Rolling and Forging
Christian Redl (INTECO melting and casting technologies GmbH)
- Author in Two-Stage Descaling at PSM Plate Mill for High-Alloy Plates
- Co-author in Vacuum Ingot Casting in the Modern Era: Plant Concepts, Process Optimization, and Performance
Ondrej Resl (Brno University of Technology, Heat transfer and fluid flow laboratory, Faculty of Mechanical Engineering)
- Co-author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Gerald Ressel (Materials Center Leoben Forschung GmbH)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Flavio Ricchini (ECOTRE Valente srl)
- Co-author in ESR simulation: prediction of quality and grain size for nickel based ingot
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Christian M.G. Rodrigues (Montanuniversität Leoben)
- Co-author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Fridtjof Rudolph (SMS group GmbH)
- Co-author in Latest developments in radial forging technology for titanium and nickel alloys
David RYCKELYNCK (Mines Paris PSL - Armines)
- Author in Intelligent surrogate model for the calibration of Hansel-Spittel flow stress model
Nima Safaee (Swerim AB, Luleå University of Technology)
- Author in Surrogate modeling of the cogging process in open die forging simulation
Edgar Saldana (FRISA)
- Author in Hot workability of Ni-Fe high-temperature alloy.
Armando Salinas-Rodriguez (CINVESTAV)
- Co-author in Hot workability of Ni-Fe high-temperature alloy.
Ilaria Salvatori (Rina Consulting- Centro Sviluppo Materiali)
- Co-author in Optimizing Induction Heating for Steel Billets: A Multiphysics Approach to Electrification and Decarbonization
RAVINDRA SANGHVAI
- Co-author in Investigating & Understanding Hot Mill Back Up Roll Failures at Tata Steel India
Božidar Šarler (University of Ljubljana and Institute of Metals and Technology)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Anna-Lena Schäfer
- Author in Closing the quality Chain: Refractories and their Influence on Ingot Steel Quality
Dirk Schencking Schulze (Hauhinco Maschinenfabrik GmbH & Co. KG)
- Co-author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Alexander Scheriau (INTECO melting and casting technologies GmbH)
- Co-author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Eike Schmilinsky
- Author in White Spot Origins, their Impact on Critical Components, and a Pathway for Prevention using VARmetric
Christoph Schöggl (Inteco melting and casting technologies GmbH)
- Co-author in Vacuum Ingot Casting in the Modern Era: Plant Concepts, Process Optimization, and Performance
Guoyi Shen (Key Laboratory of Advanced Forging & Stamping Technology and Science，Ministry of Education of China，Yanshan University; School of Mechanical Engineering, Yanshan University; National & Local Joint Engineering Research Center for Advanced Manufacture Forming Technology and Equipment，Yanshan University)
- Author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
Gulvir Singh (Guru Nanak Dev Engineering College, Ludhiana)
- Author in Intelligent Integration of Reheating Furnace Control and Hot Rolling Process to Reduce Energy Losses and Delays in Steel Bar Manufacturing
Ted Sjöberg (Swerim AB)
- Co-author in Surrogate modeling of the cogging process in open die forging simulation
Falk Snatkin (Deutsch)
- Author in Current challenges of fly ash-based casting fluxes
Claudia Solari (AIM)
- Author in ECAI Omega: 2 machines in one!
Kaiyan Song (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Manfred Stadler (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Sergey Stebunov (QuantorForm)
- Author in Digital Twin–Based Simulation Chain for Rail Manufacturing: Roll Pass Design, Head Hardening, and Straightening
Giulia Stornelli (Dipartimento di Ingegneria, Università di Perugia, Via G. Duranti 93, 06125 Perugia, Italy)
- Co-author in Effect of heat treatments on a "lean" chemical steel composition for cylinders
Ganna Stovpchenko (CFHI, UDUNT)
- Author in ELECTROSLAG REMELTING: AN ADDITIVE APPROACH TO LARGE COMPOSITIONALLY HOMOGENEOUS AND COMPOSITE COMPONENTS MANUFACTURING
Ganna Stovpchenko (CFHI, ELMET-ROLL)
- Author in Features of the solidification of large ESR hollow ingots
Hannu Suopajärvi (Sapotech Oy)
- Author in AI-Driven Surface Inspection Enabling Automated Grinding of Forged Ingots
Shigeru Suzuki (Material technology laboratory, The Japan Steel Works, Ltd.)
- Co-author in Experimental determination of partition coefficients considering peritectic reactions and application to macro-segregation simulation in a large steel ingot
Massimo Svanera (ASONEXT SpA Società Benefit)
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Chaouki TAHRI (ArcelorMittal)
- Author in Optimization of Hot Rolling Processes Using Temperature-Dependent Ductile Damage Modelling
Jesus Talamantes-Silva (Sheffield Forgemasters)
- Co-author in Development of Industrial Processing Models for Prediction of Micro-segregation in Advanced Fusion Steels
SUNRUI TAO
- Author in The Effect of the Slip Transition in the Rolling Deformation Zone on the Wear Behavior of Hot Rolling Work Rolls
Sunrui Tao (Policlinico di Milano)
- Co-author in Extension and Application of Hot Workability Prediction Model in Thermomechanical Processing
- Co-author in Shear and dynamic effects on hot deformation of Fe-25Mn-5Al-0.7C lightweight steel
Adrien Thierry (Framatome)
- Author in Intelligent surrogate model for the calibration of Hansel-Spittel flow stress model
Kunjie Tian (CFHI)
- Co-author in ELECTROSLAG REMELTING: AN ADDITIVE APPROACH TO LARGE COMPOSITIONALLY HOMOGENEOUS AND COMPOSITE COMPONENTS MANUFACTURING
Marco Truant (Acciaierie Bertoli Safau)
- Co-author in Transition to synthetic casting fluxes in ingot casting area, Acciaierie Bertoli Safau case study: analysis of process variables and qualitative impact following the fly ash supply crisis.
Mikhail Trull (Dr)
- Author in Development of Industrial Processing Models for Prediction of Micro-segregation in Advanced Fusion Steels
Hugo Uijtdebroeks (Centre de Recherches Metallurgiques ASBL)
- Co-author in Heat Transfer Study in Descaling and Roll Cooling on Blooming Line
Alberto Vazquez
- Author in Extending SBQ Rolling to Large Diameters: Stainless and Special Steels from 3.75 to 16 inches at FRISA Steel
Alberto Vazquez
- Co-author in Advances in the Production of Ultra-Clean Specialty Steels: Recent Strategies for Hydrogen Removal, Total Oxygen Reduction, and Nonmetallic Inclusion Control
Mahesh Venkataraman (OFFICINE NICOLA GALPERTI E FIGLIO SPA)
- Author in Qualification of Heat Treatment Cycle for a Forged blank in Ti-6Al-4V
Robert Vertnik (Štore Steel and University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Iban Vicario (TECNALIA, Basque Research and Technology Alliance (BRTA))
- Author in Data-Driven Regression Modeling for Energy Efficiency Optimization in Industrial Induction Heating Processes
- Co-author in Efficient electrification of round steel bars heating during rolling process
VITTORIA VIGONI (Nippon Sanso Industrial)
- Co-author in THE INDUSTRIAL IMPLEMENTATION OF A BURNER CAPABLE TO OPERATE IN PREHEATED AIR-FUEL MODE, OXY-FUEL MODE OR PREHEATED AIR-OXY-FUEL MODE
Cristian Viscardi (ECOTRE Valente srl)
- Author in ESR simulation: prediction of quality and grain size for nickel based ingot
- Co-author in Numerical simulation of carbon macrosegregation in large steel ingots
Ruben Vivanco (University of the Basque Country UPV/EHU)
- Author in Data-Driven Regression Modeling for Energy Efficiency Optimization in Industrial Induction Heating Processes
- Co-author in Efficient electrification of round steel bars heating during rolling process
Joachim von Scheele (Linde GmbH)
- Author in Heating Ingots with Oxyfuel and Hydrogen before Rolling and Forging
Gašper Vuga (University of Ljubljana)
- Author in A Combined Physics-Based and Artificial Intelligence Through-Process Modelling of Steel Production Path
Tao Wang (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Investigation on the crack resistance and strength–ductility synergy of Ta-12W alloy via corrugated–flat warm rolling
- Author in Three-Roll Skew Rolling of Titanium/Steel Bimetallic Composite Tubes: Simulation and Experiment
Tao Wang (College of Mechanical Engineering. Taiyuan University of Technology. Taiyuan 030024, China)
- Author in Thickness-Dependent Annealing Response and Microstructure–Property Evolution of 4J36 Invar Alloy during Ultrathin Processing
Tao Wang
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Tao Wang (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Research on Pulsed Current-assisted Rolling Forming and Microstructure–Properties of Pure Titanium Ultra-thin Strips
Bingchao Wang (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Research on Pulsed Current-assisted Rolling Forming and Microstructure–Properties of Pure Titanium Ultra-thin Strips
Shufeng Wei (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
- Author in Research on Pulsed Current-assisted Rolling Forming and Microstructure–Properties of Pure Titanium Ultra-thin Strips
Alexander Weigl (Inteco melting and casting technologies GmbH)
- Author in Vacuum Ingot Casting in the Modern Era: Plant Concepts, Process Optimization, and Performance
Volker Wieser (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Hampus Wikmark Kreuger (Swerim AB)
- Author in Small-scale Experiments on the Recrystallization of alloy 718 and their Transferability to Industrial Production
Martin Wolfgarten (SMS group GmbH)
- Author in Latest developments in radial forging technology for titanium and nickel alloys
Menghuai Wu (Montanuniversität Leoben)
- Co-author in Improving Ingot Quality Through Controlled Melt Flow: Industrial Application of Rotating Casting Mold (RCM) Technology
Qingxin Xu (KTH Royal Institute of Technology)
- Author in Characterization of mould flux-originated non-metallic inclusions in ingot casting
Haoran Xu (Institute of Metal Research, Chinese Academy of Sciences)
- Author in A dynamic permeability model based on real-time local solidification time for macrosegregation modeling in alloy directional solidification
Zhuofan Yang (Yanshan University)
- Author in A CAD/CAE Integrated Simulation Method for the Hydraulic System of Forging Presses Based on Model Parameter Mapping
Shintaro Yano
- Author in Experimental determination of partition coefficients considering peritectic reactions and application to macro-segregation simulation in a large steel ingot
Jianjun Yao (CFHI)
- Co-author in Features of the solidification of large ESR hollow ingots
Gaochao Yu (Yanshan University)
- Co-author in Research on anti-deflection roll-bending process for longitudinal pipes with a large length-to-diameter ratio
lei Yuan
- Co-author in A Novel Method to Regulate Non-metallic Inclusions by Pulsed Electric Current in Ultra-Low Carbon Steel and Industrial Practice
Antonella Zaccara (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in AI-Powered decision support system for early defects prediction in cast-iron products
Fugang Zhai (Yanshan University)
- Author in A CAD/CAE Integrated Simulation Method for the Hydraulic System of Forging Presses Based on Model Parameter Mapping
MingZe Zhang
- Author in Development of Linear Elastic and Elastoplastic Finite Element Solvers for Forging Simulation
Jinyu Zhao (College of Mechanical Engineering. Taiyuan University of Technology. Taiyuan 030024, China)
- Author in Thickness-Dependent Annealing Response and Microstructure–Property Evolution of 4J36 Invar Alloy during Ultrathin Processing
瑀晨王
- Author in Thickness-Dependent Annealing Response and Microstructure–Property Evolution of 4J36 Invar Alloy during Ultrathin Processing