EEC 2026 - 14th European Electric Steelmaking Conference & EMECR 2026 - 5th International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry

Name: EEC 2026 - 14th European Electric Steelmaking Conference & EMECR 2026 - 5th International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry
Start: 2026-05-11T08:00:00+02:00
End: 2026-05-13T13:30:00+02:00
Location: Milan

11–13 May 2026

Milan

Europe/Rome timezone

Organising secretariat

Author List

Ankur Agnihotri (University of Oulu)
- Author in Dynamic Modeling and Optimization of Electric Arc Furnace Operation: Coupling Energy, Oxygen, and Slag Chemistry
Masoud Ahmadinia (Coventry University)
- Author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Hesham Ahmed (Lulea University of Technology)
- Co-author in Biochar utilization in DRI-based EAF steelmaking
Susanna Airaksinen (University of Oulu)
- Author in Effect of hydrogen oxyfuel combustion on oxide scale descability by thermal shock for low-carbon steels
Muhammad Waseem Akram (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
Valentina Alemanno (RINA Consulting - Centro Sviluppo Materiali)
- Author in Industrial evaluation of biogenic secondary carbon carriers in electric arc furnace steelmaking: the BioReSTEEL approach
David Algermissen (FEhS - Institut für Baustoff-Forschung e.V.)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Mohamad AL Nasser (Technical University of Leoben)
- Author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
HAMZAH ALSHAWARGHI (Linde)
- Author in Energy-Optimized, Emissions-Reducing Technologies for EAF Steelmaking
Anton Andersson (Luleå University of Technology)
- Author in Influence of Granulation Media on the Reactivity of Electric Arc Furnace Slag as Supplementary Cementitious Materials
- Co-author in Biochar utilization in DRI-based EAF steelmaking
- Co-author in Effect of Al2O3 on structure and viscosity of EAF slag system
Lorenzo Angelini (FERALPI SIDERURGICA)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Lorenzo Angelini (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Jens Apfel
- Co-author in BSE-EAF – Future-proof Melting. Automated System for safe, reliable & efficient operation
Matteo Appiani (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Elisabetta Arato (Università di Genova)
- Author in Development of Sustainable Silica-Alumina Insulating Refractories for Coke Oven Applications
Gregor Arth (RHIMAGNESITA)
- Author in 3D measurement assisted bottleneck reduction in stainless steel production
Florent Audia (RHI Magnesita)
- Co-author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Thierry Aujoulat (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Matti Aula (Outokumpu Stainless Oy)
- Co-author in Mathematical Modelling of Slag Phase Composition during the EAF Process in Stainless Steelmaking
Jetnis Avdijaj (ULB)
- Author in Physics-Informed Reduced-Order Modeling for Temperature Prediction in Industrial Reheating Furnaces
Gioele Badina (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Giovanni Baldo (Fassa Bortolo srl)
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
- Co-author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
philippe balland (Heraeus Electro Nite France)
- Author in EAF monitoring Solution By HERAEUS Electro-Nite
Marcello Baricco (University of Turin)
- Co-author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Duro Basic (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Duro Basic (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Iker Basterretxea (ArcelorMitta Sestao SL)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Giovanni Bavestrelli (Tenova)
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
- Author in Improving Safety in Steelmaking Operations through Advanced Computer Vision and Machine Learning within the iSteel-Expert Project
Cyrille Baviere (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Cyrille Baviere (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Olaia Beaumont (Terresis Magna)
- Co-author in The Evolution of Tundish Working Lining Mass as the Example of Sustainability and Eco design of refractory masses
Narottam Behera (EMSTEEL)
- Author in A Hybrid Physical–Machine Learning Framework for Real-Time Bath Oxygen and Carbon Soft Sensing in DRI-Based Electric Arc Furnaces
- Author in Hybrid Metallurgical and Machine Learning Model for Temperature Prediction in DRI-Based EAF
Hannes Beile (tripleS GmbH & Co. KG)
- Author in Secured EAF performance through process discipline — including constraints of raw material and experience
Serap Bektas (SMS Group)
- Co-author in Value chain efficiency analysis of HBI and NH3 to transport green iron for EAF charging
Mattia Benetti (Tenova)
- Author in iRecovery® and Heat Leap: Strategic Solutions for Efficiency and Low-Carbon Steel Production
Marcello Bentivegni (Aperam)
- Author in Physics-Informed Reduced-Order Modeling for Temperature Prediction in Industrial Reheating Furnaces
Luca Bernardis (SMS Group)
- Author in Moving to next EAF digital furnace: first heat at Hybar with SMS’s group X-Pact AURA
Massimiliano Bersani (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Andrea Bertoglio
- Author in Image-Based Steel Scrap Mixture Recognition Using Deep Neural Networks
Andrea Bettiol (Fassa Bortolo srl)
- Co-author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
Pratibha Biswal (Postdoc)
- Author in Physics-Informed Reduced-Order Modeling for Temperature Prediction in Industrial Reheating Furnaces
Martina Blank (BIOS Bioenergiesysteme GmbH)
- Author in Biochar as a substitute for fossil-based injection coals in EAF operation – definition of criteria for material suitability based on lab tests, particle conversion modelling and industrial injection trials
tian bohan (baosteel)
- Author in Establishment and joint utilization of static and dynamic models for Baosteel electric arc furnaces
Christian Bohling (SECOPTA analytics GmbH)
- Co-author in Process improvements by real-time on site analysis of metallurgical processes
Matt Boot-Handford (Calix Limited)
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Themistoklis Boutos (Graftech)
- Author in A System and Best Practice to Reduce Electrode Pin Breaks
Thomas Bräck (Meva Energy)
- Author in From Fossil Dependence to Energy Resilience: Biosyngas for Low-Carbon Steelmaking
Teresa Annunziata Branca (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
- Co-author in Future slags in electric-based ironmaking and steelmaking
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
MARTIN RUDOLF BRAUER (Qlar Europe GmbH)
- Author in Innovation in weighing technologies meet growing melt shop operation requirements
Geoffrey Brooks (Swinburne University of Technology)
- Author in Evaluation of Ammonia-Based Direct Reduced Iron (NH3-DRI) and Its Implications for Subsequent Steel Making Process
- Author in Potential use of Bio-Coke in Electric Arc Furnace for Steel Production
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
- Co-author in Impact of New Iron Sources on Basic Oxygen Furnace Operations
- Co-author in Modelling of Hydrogen Flame Interaction with the Scrap Beds in Steelmaking Furnaces
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Guillaume Brosse (SMS Group)
- Co-author in Value chain efficiency analysis of HBI and NH3 to transport green iron for EAF charging
Stefano Bucci (Università degli Studi di Torino)
- Author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Sara Busolini (Acciaierie Bertoli Safau)
- Author in Development process of the EAF produciton route with new slag management for high silicon steel grade (54SiCr6) for automobile spring steel and low carbon grades (SG2-SG3) for welding wire, from scrap yard to wire rod coil. Lesson learned and future improvements.
Giorgio Carlo Buttazzo (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
GeunWoo Byun (Hanyang University)
- Author in Effect of Bottom-Blowing on Nitrogen Removal Kinetics in Electric Arc Furnace (EAF) Conditions
Felipe Calleja Cobo (Reinosa Forging & Casting)
- Co-author in Scrap-Based Steelmaking: Integrating AI, Life Cycle Assessment and Critical Raw Materials to Advance Circular Strategies
Stefano Campanari (Politecnico di Milano)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Damiano Capobianco (RINA CSM)
- Author in Valorisation of EAF dust by agglomeration and recycling back to process
Alberto Cardellini (Paul Wurth Italia S.p.A (SMS group))
- Author in Development of Sustainable Silica-Alumina Insulating Refractories for Coke Oven Applications
Cristiano Castagnola (SMS Group)
- Author in Circular Carbon and Electrified Heat: Carbon neutral Syngas heated by Paul Wurth Tempra to reduce Blast Furnace CO₂ Emissions
Alberto Castellero (Università degli Studi di Torino)
- Co-author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Deniz Catan (Primetals Technologies Germany)
- Co-author in Electrifying Steelmaking: Next-Level Performance with EAF Ultimate MOVE, EAF Quantum, and Breakthrough Innovations
- Co-author in Green DRI-based EAF steelmaking – Feedstock, Design and Operational Results
Julian Cejka (Technical University of Leoben)
- Author in Influence of copper and tin on the oxidic cleanness and investigation of the agglomeration tendency of non-metallic inclusions in a medium-carbon steel
- Co-author in Implementation of Novel Tracing Techniques to Control Steel Cleanness in CO2‑Neutral Steelmaking
Saikat Chatterjee
- Author in EAF - Trials with Scrap and solid iron in a 6 tonnes pilot furnace
Chunhao Chen (Walsin Lihwa Corporation)
- Co-author in Driving efficiency in stainless steel production: Demonstrated impact of electromagnetic stirring on a 65-ton AC electric arc furnace at Walsin Lihwa
zaoping chen (baosteel)
- Author in Establishment and joint utilization of static and dynamic models for Baosteel electric arc furnaces
Chunlin Chen (Csiro)
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
Guoguang Cheng (State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing)
- Co-author in High-Cleanliness Production of Crankshaft Steel through Optimization of Slag Composition
Hannah Hyunah Cho (Macquarie University)
- Author in Biochar application for sustainable ironmaking using electric smelting furnace
Tony Chu (ABB AB in Taiwan)
- Co-author in Driving efficiency in stainless steel production: Demonstrated impact of electromagnetic stirring on a 65-ton AC electric arc furnace at Walsin Lihwa
BYUNG JUN CHUNG (POSCO)
- Author in Development of low carbon sinter technology using low melting point additives
F Cirilli (Rina Consulting Centro Sviluppo Materiali)
- Author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
- Author in Experimental Assessment of Granulated EAF Slag for blasting operations as sand substitute in steel production
Philippe Clavier (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Maia Clericuzio (Università di Genova)
- Author in Development of Sustainable Silica-Alumina Insulating Refractories for Coke Oven Applications
Paolo Colbertaldo (Politecnico di Milano)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Valentina Colla (Scuola Superiore Sant'Anna)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
- Co-author in Future slags in electric-based ironmaking and steelmaking
- Co-author in Improving Safety in Steelmaking Operations through Advanced Computer Vision and Machine Learning within the iSteel-Expert Project
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
alberto conejo (itm)
- Co-author in Mathematical modelling of slag foaming of EAF slags
Hans Georg Conrads
- Author in Predicting EAF melt performance by using online off-gas data
Salvatore Conte (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Rodrigo Corbari
- Co-author in A System and Best Practice to Reduce Electrode Pin Breaks
Axel Coussement (Professor)
- Author in Physics-Informed Reduced-Order Modeling for Temperature Prediction in Industrial Reheating Furnaces
Jo dahan (Inha university)
- Author in Temperature-Dependent Carburization Kinetics and Carbon deposition of iron in CO-H2-CH4 Gas Mixtures
Massimiliano Daita (Coventry University)
- Author in The Electric Arc Furnace for next gen mini mill
Gianluca Dall'Osto (Politecnico di Milano)
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
- Author in Iron Ore Smelting System Using a Sustainable Coal-Based Direct Reduction and CO₂ Sequestration
- Co-author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
Edoardo D'Amanzo (Rina Consulting - Centro Sviluppo Materiali)
- Author in Experimental Assessment of Granulated EAF Slag for blasting operations as sand substitute in steel production
- Co-author in Tenova’s Dry-Granulation System for Ladle Furnace Slag (Slag2Build Project)
Elena Da Val (Fassa Bortolo srl)
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
Tabea Decker (Badisch Stahl-Engineering)
- Author in Reducing Power-Off Times Through Maintenance, Training, and Standardization
Borja De La Peña (ArcelorMittal Basque Country Research Centre AIE)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Clara Delgado (Fundacion Azterlan)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Kevin Delsol (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Kevin Delsol (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Vinícius de Morais Oliveira (Vale S.A.)
- Co-author in Assessment of SiO₂ and Al₂O₃ interchangeability in the DR-EAF Steelmaking Route
Arthur de Mul (Huisman Equipment B.V.)
- Author in Driving Innovation in Steel Production: Huisman’s entry into the Process Crane Market
leandro dijon de oliveira campos (Vale International)
- Co-author in Assessment of SiO₂ and Al₂O₃ interchangeability in the DR-EAF Steelmaking Route
Michele De Santis (Rina Consulting - CSM)
- Co-author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
Stefano Dettori (Scuola Superiore Sant'Anna)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
Alessandro De Vecchi (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Cosmo Di Cecca (FERALPI SIDERURGICA)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Cosmo Di Cecca (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Uxia Dieguez Salgado (RHI Magnesita)
- Co-author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
William Di Francesco (Swerim AB)
- Author in Metallurgical biocarbon as a decarbonization strategy: Policy drivers and industrial implications from a Swedish perspective
- Co-author in HåBiMet – Safe management of sustainable biocarbon for metallurgical use
Daniel Dinkel (Primetals Technologies Germany GmbH)
- Author in Application of Modular Multilevel Converters in Electric Arc Furnace Systems
Orlando Di Pietro (Rina Consulting - CSM)
- Co-author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
Djafer Djerbal (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Neslihan Dogan (Associate Professor)
- Co-author in Assessment of Biochar Production and Integration into HIsarna Ironmaking
Nurten Başak Dülger (PhD)
- Author in Mitigation of Copper Redeposition in Acid Pickling of EAF Flat Steels through Bath Chemistry Control
- Author in Valorization of Acid Regeneration Iron Oxide Residues into α-Fe₂O₃ Pigments by Chemical Routes
Vincenzo Duro (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Tom Eades
- Author in Closed-Loop Optimization for Energy Efficiency and Scrap Utilization in Steelmaking at Marcegaglia Sheffield
Thomas Echterhof (RWTH Aachen University)
- Author in Recent research, planned equipment upgrades and future work at the pilot EAF at RWTH Aachen University
- Co-author in Ecological assessment of the use of hydrochar in EAF operation based on an LCA approach
- Co-author in Machine Learning-based Scrap Characterization for Process Optimization in Electric Arc Furnaces
Lukas Ecker (JKU Linz)
- Author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Florian Egger (K1-MET GmbH)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Jan Eisbacher-Lubensky
- Co-author in A Front-Fixing Approach for Scrap Dissolution Modeling in EAF Steelmaking
Sami Elsabagh
- Co-author in Machine Learning-based Scrap Characterization for Process Optimization in Electric Arc Furnaces
Ali Emami (Tata Steel Nederland)
- Author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
- Co-author in A Time-based Pellet Melting Approach to Model Feed Pile Formation in Electric Smelting Furnace
Fredrik Engström (Luleå University of Technology, Process Metallurgy)
- Co-author in Influence of Granulation Media on the Reactivity of Electric Arc Furnace Slag as Supplementary Cementitious Materials
Bernard Ennis (Tata Steel Europe)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Daniel Ernst Ernst (Technical University of Leoben)
- Author in Assessment of Oxide Alloying Elements in the Hydrogen Plasma Smelting Reduction (HPSR) Process
- Co-author in Implementation of Novel Tracing Techniques to Control Steel Cleanness in CO2‑Neutral Steelmaking
Dogan ERTAS (gemkom makina)
- Author in FESCON SYSTEM: TRANSFORMING STEEL TO GREEN
Mehdi Eslamian Koupaie (Atieh Partak Pipe Industry, Islamic Azad University (Isfahan Branch))
- Author in Design and Implementation of a Fuzzy Controller for Inter-Stand Tension in a Tandem Mill
- Author in Multi-Stage Waste-Heat Recovery and Furnace Optimization in Seamless Pipe Production: A Case Study at Atieh Partak Pipe Industries
Tim Evans (Macquarie University)
- Author in Biochar application for sustainable ironmaking using electric smelting furnace
Timo Fabritius (University of Oulu)
- Co-author in Pellet porosity changes under simulated blast furnace shaft conditions
Timo Fabritius (University of Oulu)
- Co-author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
Ahmed Farag (RWTH Aachen University)
- Co-author in Recent research, planned equipment upgrades and future work at the pilot EAF at RWTH Aachen University
Omid Fatemi
- Author in Image-Based Steel Scrap Mixture Recognition Using Deep Neural Networks
Thomas Fearnley (7-Steel Nordic)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Stephan Ferenczy (Steel Infinity)
- Author in Operating experiences with Spray Cooled EAF conversion at SDI Columbia City
Scott Ferguson (Systems Spray-Cooled)
- Author in Operating experiences with Spray Cooled EAF conversion at SDI Columbia City
alessandro ferraiuolo (Marcegaglia Ravenna)
- Author in Iron Ore Smelting System Using a Sustainable Coal-Based Direct Reduction and CO₂ Sequestration
Marco Ficili (Politecnico di Milano)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Aldo Fiorini (Marcegaglia)
- Author in Iron Ore Smelting System Using a Sustainable Coal-Based Direct Reduction and CO₂ Sequestration
Felix Firsbach
- Author in Reducing Power-Off Times Through Maintenance, Training, and Standardization
Marc Flammang (TMT Luxembourg)
- Co-author in Measuring Technologies for DRI-fed Electric Arc Furnaces
Dr. Alexander Fleischanderl (CTO)
- Author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Julia Fogelström (SSAB)
- Co-author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
Gianpaolo Foglio (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Jeanne Fradet (Tata Steel IJmuiden, Netherlands)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Michael Freiler (RHI Magnesita)
- Co-author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Michael Freiler (RHI Magnesita)
- Co-author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
Piero Frittella (Feralpi Siderurgica)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Kenichi Fujii (JFE Steel Corporation)
- Co-author in Optimization of Water Heating in Steel Sheet Cleaning through Multi-Stage Heat Exchange and Heat Pump Integration
David Garcia (Fundacion Azterlan)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Íñigo Xabier García Zubiri (Magnesitas Navarras, S.A (TERRESIS MAGNA))
- Author in The Evolution of Tundish Working Lining Mass as the Example of Sustainability and Eco design of refractory masses
Pierre-Louis Garmier (GE VERNOVA)
- Co-author in Direct Feed to Enhance Power Quality and EAF performance
Pierre-Louis Garmier (GE Vernova)
- Author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Luca Gemo (Acciaierie Bertoli Safau)
- Author in Development process of the EAF produciton route with new slag management for high silicon steel grade (54SiCr6) for automobile spring steel and low carbon grades (SG2-SG3) for welding wire, from scrap yard to wire rod coil. Lesson learned and future improvements.
Shone George (Coventry University)
- Co-author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Renato Girelli (Tenova S.p.A.)
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
- Co-author in Improving Safety in Steelmaking Operations through Advanced Computer Vision and Machine Learning within the iSteel-Expert Project
Daniele Giunta (RHI Magnesita)
- Co-author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Carsten Gondorf (IOB - RWTH Aachen University)
- Author in Ecological assessment of the use of hydrochar in EAF operation based on an LCA approach
- Co-author in Recent research, planned equipment upgrades and future work at the pilot EAF at RWTH Aachen University
Shashank Goyal (EurA AG)
- Co-author in Scrap-Based Steelmaking: Integrating AI, Life Cycle Assessment and Critical Raw Materials to Advance Circular Strategies
Thomas Griessacher (Stahl- und Walzwerk Marienhütte GmbH)
- Author in Biochar as a substitute for fossil-based injection coals in EAF operation – definition of criteria for material suitability based on lab tests, particle conversion modelling and industrial injection trials
Stefan Griesser (Austria)
- Author in Next Generation Raw-Material and Process Optimization in Electric Arc Furnace Steelmaking
Stefan Groenheide (Spectral Industries)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Clay Gross (Steel Dynamics)
- Co-author in Operating experiences with Spray Cooled EAF conversion at SDI Columbia City
Isabell Gruber (Christian Doppler Laboratory for Inclusion Metallurgy in Advanced Steelmaking, Chair of Ferrous Metallurgy, Technical University of Leoben)
- Author in Influence of copper and tin on the oxidic cleanness and investigation of the agglomeration tendency of non-metallic inclusions in a medium-carbon steel
Maoqiang Gu (University of science and technology liaoning)
- Author in Temperature prediction model in an electric arc furnace based on data-driven
Kezhuan Gu (ArcelorMittal Dofasco Global Research and Development Hamilton)
- Author in The Study of Different Ca Cored Wires on Calcium Treatment Process
Sara Guazzi (Department of Energy, Politecnico di Milano, via Lambruschini 4, 20156 Milan, Italy)
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
François Guerin (Rolanfer Recyclage)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Adrien Guiraud (CSIRO)
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
Jens-Uwe Günther (SECOPTA analytics GmbH)
- Co-author in Process improvements by real-time on site analysis of metallurgical processes
Juho Haapakangas (University of Oulu)
- Co-author in Effect of hydrogen oxyfuel combustion on oxide scale descability by thermal shock for low-carbon steels
Valtteri Haavisto (Luxmet Ltd)
- Author in Leveraging Optical Emission Spectroscopy (OES) for Enhanced Process Control in Ladle Furnace (LF)
Gernot Hackl (RHI Magnesita GmbH)
- Co-author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
mohamadhosein haddadzadeh
- Author in Third-Generation Structured Amine Sorbent Technology for Direct Air Carbon Capture (DAC): A Case Study, Advantages, and Challenges
Martin Hafok (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Hany Hamed (EMSTEEL)
- Author in Hybrid Metallurgical and Machine Learning Model for Temperature Prediction in DRI-Based EAF
Hany Hamed (EMSTEEL)
- Co-author in A Hybrid Physical–Machine Learning Framework for Real-Time Bath Oxygen and Carbon Soft Sensing in DRI-Based Electric Arc Furnaces
Ahmed-Samir Hamidi (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
Matias Hauru (University of Oulu)
- Author in Preliminary Results on the Melting of Individual Hydrogen Direct Reduced Iron Pellets in a Laboratory-scale Electric Arc Furnace
Matias Hauru (University of Oulu)
- Co-author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
Sumit Hazra (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
Ali Hegazy (Primetals Technologies Germany)
- Author in Green DRI-based EAF steelmaking – Feedstock, Design and Operational Results
Anne Heikkilä (University of Oulu)
- Author in Pellet porosity changes under simulated blast furnace shaft conditions
- Co-author in Effect of hydrogen oxyfuel combustion on oxide scale descability by thermal shock for low-carbon steels
Eetu-Pekka Heikkinen (University of Oulu)
- Author in A comparison of simulated and analysed phase compositions of solidified EAF slags
Leon Heinl (Primetals Technology)
- Co-author in Electrifying Steelmaking: Next-Level Performance with EAF Ultimate MOVE, EAF Quantum, and Breakthrough Innovations
Matthias Heinrich (Fraunhofer IZFP)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Jon Hermosa Garcia (Sidenor Aceros Especiales)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Bernhard Hiebl (Head of Technology Ironmaking)
- Co-author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Ryota Higashi (Graduate School of Environmental Studies, Tohoku University)
- Author in Production and Evaluation of a Carbon-Recycled Carburizing Agent to Promote the Melting of Direct Reduced Iron
Toshiyuki Hirosawa (JFE Steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Matthias Höck (RHIMAGNESITA)
- Co-author in 3D measurement assisted bottleneck reduction in stainless steel production
- Co-author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
Xianfeng Hu (Swerim AB)
- Co-author in In situ observation of metal-slag separation and inclusion motion at the surface of hydrogen-based direct reduction iron melt
Pekka Huhtala (Luxmet Ltd)
- Co-author in Leveraging Optical Emission Spectroscopy (OES) for Enhanced Process Control in Ladle Furnace (LF)
Joar Huss (SSAB)
- Co-author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
Matthew Hutchinson (Coventry University)
- Co-author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Su Min Hwang (Hanyang University, Department of Materials Science and Chemical Engineering)
- Co-author in Influence of Granulation Media on the Reactivity of Electric Arc Furnace Slag as Supplementary Cementitious Materials
Ane Ibáñez (Terresis Magna)
- Co-author in The Evolution of Tundish Working Lining Mass as the Example of Sustainability and Eco design of refractory masses
Mikko Iljana (University of Oulu)
- Co-author in Pellet porosity changes under simulated blast furnace shaft conditions
Tuomo Ilmakangas (Luxmet Ltd)
- Author in Leveraging Optical Emission Spectroscopy (OES) for Enhanced Process Control in Ladle Furnace (LF)
Jenny Isaksson (Luleå University of Technology)
- Co-author in Effect of Al2O3 on structure and viscosity of EAF slag system
Anton ishmurzin (RHI Magnesita)
- Co-author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
Esra Işık
- Author in Mitigation of Copper Redeposition in Acid Pickling of EAF Flat Steels through Bath Chemistry Control
Yuki Iwai (JFE steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Mohammad Jafarzadeh (K1-MET GmBH)
- Co-author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
Tova Jarnerud Örell (Swerim AB)
- Author in HåBiMet – Safe management of sustainable biocarbon for metallurgical use
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
- Co-author in Metallurgical biocarbon as a decarbonization strategy: Policy drivers and industrial implications from a Swedish perspective
Alexander Jelinek (K1-MET)
- Co-author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Chung-Hwan Jeon (Pusan Clean Energy Research Institute, Pusan National University)
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Jihong Ji (SMS Group)
- Author in Value chain efficiency analysis of HBI and NH3 to transport green iron for EAF charging
Yijiao Jiang (Macquarie University)
- Author in Biochar application for sustainable ironmaking using electric smelting furnace
Emilio Jimenez (University of La Rioja)
- Author in Next-Generation Workforce Training for Electric Arc Furnace Steelmaking
Mikko Jokinen (Luxmet Ltd)
- Co-author in Leveraging Optical Emission Spectroscopy (OES) for Enhanced Process Control in Ladle Furnace (LF)
- Co-author in Machine Learning-based Scrap Characterization for Process Optimization in Electric Arc Furnaces
Toste Jonsater (Höganas Sweden AB)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Domagoj-Kresimir Jukic (Primetals Technologies Germany GmbH)
- Author in Application of Modular Multilevel Converters in Electric Arc Furnace Systems
In-Ho Jung (Seoul National University)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Kasper Kaczmarek (ABB Corporate Technology Center, ABB Sp. z o. o.)
- Co-author in Driving efficiency in stainless steel production: Demonstrated impact of electromagnetic stirring on a 65-ton AC electric arc furnace at Walsin Lihwa
Felix Kaiser (RWTH Aachen University)
- Co-author in Ecological assessment of the use of hydrochar in EAF operation based on an LCA approach
Daniel Kakas
- Author in Reducing Power-Off Times Through Maintenance, Training, and Standardization
Rita Kallio (University of Oulu)
- Co-author in A comparison of simulated and analysed phase compositions of solidified EAF slags
Andrey Karasev (KTH Royal Institute of Technology)
- Co-author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
Ebrahim Karimi Sibaki (Montanuniversitaet)
- Co-author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
yusuke kashihara (JFE Steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Dimitris Katsikas (Stomana)
- Co-author in Tenova’s Dry-Granulation System for Ladle Furnace Slag (Slag2Build Project)
Yuki Kawashiri (JFE Steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Geert Keetels (Faculty of Mechanical Engineering, Delft University of Technology)
- Co-author in A Time-based Pellet Melting Approach to Model Feed Pile Formation in Electric Smelting Furnace
Florian Kek (RHI Magnesita)
- Author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Memduh Kagan Keler (ArcelorMittal Maizières Research)
- Author in The Study of Different Ca Cored Wires on Calcium Treatment Process
Martin Kendall (Heraeus Electro-nite)
- Co-author in Dynamic Modeling and Optimization of Electric Arc Furnace Operation: Coupling Energy, Oxygen, and Slag Chemistry
Maximilian Kern (qoncept)
- Author in Next Generation Raw-Material and Process Optimization in Electric Arc Furnace Steelmaking
Ahmed Khafaga (CU Coventry)
- Co-author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Abdellah Kharicha (Montanuniversitaet Leoben, Department of Metallurgy)
- Co-author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
- Co-author in Towards Better Furnace Design: Minimizing Energy Consumption Through Controlled Freeze Lining Formation
Darbaz Khasraw (Coventry University)
- Co-author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Frederick Kieferndorf (ABB Switzerland Ltd.)
- Author in Evolving AC electric steelmaking – from thyristor based digital power supply solutions to the next generation advanced furnace power control system
Lina Kieush (K1-MET GmbH)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Youngjae Kim (Inha University)
- Co-author in Control of Free-CaO in Steel slag via heat treatment
- Co-author in Temperature-Dependent Carburization Kinetics and Carbon deposition of iron in CO-H2-CH4 Gas Mixtures
Jeong-In Kim (Tohoku University)
- Author in Thermal and reaction analysis of iron ore agglomerates under hydrogen atmosphere
Sung-Yong Kim (EZ CASTECH)
- Co-author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
Juhun Kim (POSCO)
- Author in Development of low carbon raw material substitution technology based on BF process
- Author in Development of Low-Carbon Blast Furnace Operation Technology through Scrap Utilization and EDEM Simulation
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Sun-Joong KIM (Chosun University)
- Author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
- Co-author in Effect of bottom-blowing pattern on the motion behavior of HBI at the bath surface in an EAF-typed water model
Jongho kim (POSCO Technical Research Laboratories)
- Author in Development of low carbon raw material substitution technology based on BF process
Min-Woo Kim (Pusan Clean Energy Research Institute, Pusan National University)
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
JONGHO KIM (POSCO Technical Research Laboratories)
- Author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Gyeong-Min Kim (Pusan Clean Energy Research Institute, Pusan Clean Energy Research Institute)
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Peter Kinzel (SMS Group)
- Co-author in Value chain efficiency analysis of HBI and NH3 to transport green iron for EAF charging
Marcus Kirschen
- Author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
Siegfried Kleber (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Carel Kleemans (Tata Steel IJmuiden, Netherlands)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Bernd Kleimt (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Emre Kocakuşaklı (Borçelik Çelik Sanayii Ticaret A.Ş.)
- Author in Valorization of Acid Regeneration Iron Oxide Residues into α-Fe₂O₃ Pigments by Chemical Routes
Suresh Kodukula (RHI Magnesita)
- Co-author in Implementation of Recycled Zr Slag band layer in submerged entry nozzle
Irmela Kofler (K1-Met)
- Co-author in Comparison of carbon capture technologies for steel and cement off-gases
Niklas Kojola (SSAB)
- Co-author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
Tommi Kokkonen (University of Oulu)
- Co-author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
- Co-author in Preliminary Results on the Melting of Individual Hydrogen Direct Reduced Iron Pellets in a Laboratory-scale Electric Arc Furnace
Pieter Koopmans (Tata Steel Nederland)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Ryan Kopacko
- Co-author in A System and Best Practice to Reduce Electrode Pin Breaks
Eveliina Korhonen (Luxmet Ltd)
- Author in Leveraging Optical Emission Spectroscopy (OES) for Enhanced Process Control in Ladle Furnace (LF)
Chris Kovscek (Nucor Steel)
- Co-author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
Hans-Jörg Krassnig (Primetals Technologies Austria)
- Author in Electrifying Steelmaking: Next-Level Performance with EAF Ultimate MOVE, EAF Quantum, and Breakthrough Innovations
Min-Jong Ku (Pusan Clean Energy Research Institute, Pusan National University)
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Ujwal Kudaru (Swinburne University of Technology)
- Author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
Banty Kumar (csiro)
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
Ashok Kumar (Tata Steel UK Ltd./Swansea University)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Andreas Kunz (QuantoLux)
- Co-author in Modern in-situ Slag adjustment for EAF, BOF, LF, and VD Steelmaking
Nicole Kuo (Swinburne University of Technology)
- Author in Impact of New Iron Sources on Basic Oxygen Furnace Operations
Takashi Kuroki (JFE STEEL CORPORATION)
- Author in Optimization of Water Heating in Steel Sheet Cleaning through Multi-Stage Heat Exchange and Heat Pump Integration
Pascal Kwaschny (Linde)
- Co-author in Energy-Optimized, Emissions-Reducing Technologies for EAF Steelmaking
GI-HO LA (POSCO)
- Co-author in Development of CO2 Emission Reduction Technology in Blast Furnace Process using H2 rich Gas Injection and Alternative Iron Ore Charging
Larry Lai (Walsin Lihwa Corporation)
- Author in Driving efficiency in stainless steel production: Demonstrated impact of electromagnetic stirring on a 65-ton AC electric arc furnace at Walsin Lihwa
Andrea Landini (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
Nicolas Lapassat (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
YUBIN LEE (Hyundai Steel Research Engineer)
- Co-author in Temperature-Dependent Carburization Kinetics and Carbon deposition of iron in CO-H2-CH4 Gas Mixtures
Sunghee Lee (POSCO Technical Research Laboratories)
- Author in Development of low carbon raw material substitution technology based on BF process
WOONJAE LEE (POSCO)
- Author in Development of CO2 Emission Reduction Technology in Blast Furnace Process using H2 rich Gas Injection and Alternative Iron Ore Charging
Seungmoon Lee (POSCO Technical Research Laboratories)
- Co-author in Development of low carbon raw material substitution technology based on BF process
Jasung Lee
- Author in Control of Free-CaO in Steel slag via heat treatment
YOUNGSEOK LEE (POSCO)
- Co-author in Development of CO2 Emission Reduction Technology in Blast Furnace Process using H2 rich Gas Injection and Alternative Iron Ore Charging
Michel Leite (Vale)
- Author in Assessment of SiO₂ and Al₂O₃ interchangeability in the DR-EAF Steelmaking Route
Thomas Leitner (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Aldo Lepore (More Srl)
- Co-author in More dynamic carbon injection: a novel approach for slag foaming control in EAF steelmaking with continuous charge feeding
Xavier Lhoest (John Cockerill)
- Co-author in Volteron™: Scalable Electrochemical Ironmaking for Carbon-Free Steel Production
Zushu Li (University of Warwick)
- Author in Fundamental Understanding of Modified Electric Arc Furnace Slag for the Production of Electric Cement
- Author in Research for Redesigning the Steel Scrap System
Daniel Liang (Csiro)
- Co-author in Modelling of Hydrogen Flame Interaction with the Scrap Beds in Steelmaking Furnaces
Trygve Lindahl Schanche (SINTEF Industry)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Huan Liu (USTB)
- Author in Mathematical modelling of slag foaming of EAF slags
Antoine Llau (ArcelorMittal France)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Carlos Llovo Vidal (Reinosa Forging & Casting)
- Co-author in Scrap-Based Steelmaking: Integrating AI, Life Cycle Assessment and Critical Raw Materials to Advance Circular Strategies
Uwe Lohse
- Author in All-Electric Plasma Torches as a Replacement for Industrial Gas Burners
Kristoffer Lorentsson (Meva Energy)
- Co-author in From Fossil Dependence to Energy Resilience: Biosyngas for Low-Carbon Steelmaking
Jinlong Lu (Guangdong Shaoguan Iron and Steel Songshan Co., Ltd. of Baowu Group Zhongnan Iron and Steel)
- Co-author in High-Cleanliness Production of Crankshaft Steel through Optimization of Slag Composition
Yu-Chiao Lu (KTH Royal Institute of Technology)
- Co-author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
MASSIMO GIOVANNI BARTOLOMEO LUGNANI (SMS Group)
- Author in Moving to next EAF digital furnace: first heat at Hybar with SMS’s group X-Pact AURA
Nirmal Madhavan
- Author in Assessment of Biochar Production and Integration into HIsarna Ironmaking
Joe Maiolo (Linde)
- Co-author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
- Co-author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
Ilpo Mäkelä (Process Metallurgy Research Unit, University of Oulu)
- Co-author in A comparison of simulated and analysed phase compositions of solidified EAF slags
- Co-author in Mathematical Modelling of Slag Phase Composition during the EAF Process in Stainless Steelmaking
Carlo Mapelli (Dipartimento di Meccanica - Politecnico di Milano)
- Author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
- Author in Iron Ore Smelting System Using a Sustainable Coal-Based Direct Reduction and CO₂ Sequestration
Antonio Mara (Centro Ricerche Fiat S.c.p.a.)
- Co-author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Itziar Marquez (Reydesa Recycling SL – Fundacion Inatec)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Guzzon Marta (Tenova)
- Author in Tenova’s Dry-Granulation System for Ladle Furnace Slag (Slag2Build Project)
- Co-author in Future slags in electric-based ironmaking and steelmaking
Ciaran Martin (Tata Steel Research and Innovation Limited)
- Co-author in Research for Redesigning the Steel Scrap System
Sara Marzio (Acciaierie Bertoli Safau)
- Author in Development process of the EAF produciton route with new slag management for high silicon steel grade (54SiCr6) for automobile spring steel and low carbon grades (SG2-SG3) for welding wire, from scrap yard to wire rod coil. Lesson learned and future improvements.
Fabio Massa (Centro Ricerche Fiat S.c.p.a.)
- Co-author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Marina Massei (SIM4Future srls)
- Author in Simulation Based Training for Industrial Operations: Interactive Learning for Complex Tasks
Ismael Matino (Scuola Superiore Sant'Anna - TeCIP Institute - ICT-COISP)
- Author in Future slags in electric-based ironmaking and steelmaking
- Author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Gabriele Mazzi (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Koen Meijer (Tata Steel R&D, Netherlands)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Koen Meijer (Project Coordinator R&D Ironmaking)
- Co-author in Assessment of Biochar Production and Integration into HIsarna Ironmaking
Ward Melis (KU Leuven)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Mauro Meneghin (Danieli Automation S.p.A.)
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
Federica Merenda (Scuola Superiore Sant'Anna)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Anniina Merenluoto (University of Oulu)
- Co-author in A comparison of simulated and analysed phase compositions of solidified EAF slags
Andy Messineo
- Co-author in A System and Best Practice to Reduce Electrode Pin Breaks
Martina Messuti (Tenova)
- Co-author in Tenova’s Dry-Granulation System for Ladle Furnace Slag (Slag2Build Project)
David Michel (John Cockerill)
- Author in Volteron™: Scalable Electrochemical Ironmaking for Carbon-Free Steel Production
Lorenzo Micheletti (SMS Group)
- Co-author in Circular Carbon and Electrified Heat: Carbon neutral Syngas heated by Paul Wurth Tempra to reduce Blast Furnace CO₂ Emissions
Susanne Michelic (Montanuniversitaet Leoben)
- Author in Influence of copper and tin on the oxidic cleanness and investigation of the agglomeration tendency of non-metallic inclusions in a medium-carbon steel
- Co-author in Assessment of Oxide Alloying Elements in the Hydrogen Plasma Smelting Reduction (HPSR) Process
- Co-author in Implementation of Novel Tracing Techniques to Control Steel Cleanness in CO2‑Neutral Steelmaking
Sebastian Michelic (Austria)
- Author in Next Generation Raw-Material and Process Optimization in Electric Arc Furnace Steelmaking
Robert Michelic (Austria)
- Author in Next Generation Raw-Material and Process Optimization in Electric Arc Furnace Steelmaking
GIUSEPPE Miglietta (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Greta Minelgaite (Reydesa Recycling SL – Fundacion Inatec)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Daphne Mirabile (RINA CONSULTING - Centro Sviluppo Materiali SPA)
- Author in Industrial evaluation of biogenic secondary carbon carriers in electric arc furnace steelmaking: the BioReSTEEL approach
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Giovanni Misso
- Author in Image-Based Steel Scrap Mixture Recognition Using Deep Neural Networks
Bernhard Mitas (Mitras)
- Co-author in Pellet porosity changes under simulated blast furnace shaft conditions
Bernhard Mitas (Montanuniversität Leoben)
- Author in A Front-Fixing Approach for Scrap Dissolution Modeling in EAF Steelmaking
Alireza Mohammadi Fesharki (Atieh Partak Pipe Industries)
- Author in Multi-Stage Waste-Heat Recovery and Furnace Optimization in Seamless Pipe Production: A Case Study at Atieh Partak Pipe Industries
- Co-author in Design and Implementation of a Fuzzy Controller for Inter-Stand Tension in a Tandem Mill
Babak Mokhtarani (The University of Newcastle)
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Davide Mombelli (Politecnico di Milano - Dipartimento di Meccanica)
- Author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
- Author in Iron Ore Smelting System Using a Sustainable Coal-Based Direct Reduction and CO₂ Sequestration
Giovanni Montana (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
R Moreschi (Fassa srl)
- Author in Assessment of the natural absorption of CO2 performed by electric steelmaking slag
- Co-author in Assessment of dephosphoration and desulphurizing capacity of the slag as a function of the firing conditions of the lime
Agnieszka Morillon (FEhS Institut fuer Baustoff-Forschung e.V)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Stefano Morsut (More Srl)
- Author in More dynamic carbon injection: a novel approach for slag foaming control in EAF steelmaking with continuous charge feeding
Christa Mühlegger (K1-Met)
- Author in Comparison of carbon capture technologies for steel and cement off-gases
TAICHI MURAKAMI (Tohoku University)
- Author in Production and Evaluation of a Carbon-Recycled Carburizing Agent to Promote the Melting of Direct Reduced Iron
Siddharth Nachankar (Indien)
- Author in Machine Learning-based Scrap Characterization for Process Optimization in Electric Arc Furnaces
Jamal Naser (Swinburne University of Technology)
- Co-author in Modelling of Hydrogen Flame Interaction with the Scrap Beds in Steelmaking Furnaces
Shungo Natsui (Tohoku University)
- Author in Thermal and reaction analysis of iron ore agglomerates under hydrogen atmosphere
Julian Naveira (John Cockerill Industry)
- Author in AI Assisted Thermal Modelling for Advanced Furnace Control and Process Optimization
Niels Niberon (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Hiroshi Nogami (Tohoku University)
- Author in Thermal and reaction analysis of iron ore agglomerates under hydrogen atmosphere
Bintang A. Nuraeni (Swinburne University of Technology)
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Erland Nylund (Swerim AB)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
- Co-author in HåBiMet – Safe management of sustainable biocarbon for metallurgical use
- Co-author in Metallurgical biocarbon as a decarbonization strategy: Policy drivers and industrial implications from a Swedish perspective
Ingwald Obernberger (BIOS Bioenergiesysteme GmbH)
- Author in Biochar as a substitute for fossil-based injection coals in EAF operation – definition of criteria for material suitability based on lab tests, particle conversion modelling and industrial injection trials
Tyamo Okosun (Purdue University Northwest)
- Co-author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
- Co-author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
Alessandro Olcese (SMS Group)
- Co-author in Circular Carbon and Electrified Heat: Carbon neutral Syngas heated by Paul Wurth Tempra to reduce Blast Furnace CO₂ Emissions
Simona Oliverio (Tenova)
- Author in Tenova’s Dry-Granulation System for Ladle Furnace Slag (Slag2Build Project)
Marco Ometto (Danieli Automation S.p.A.)
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
Mary Osorio Baena (EurA AG)
- Author in Scrap-Based Steelmaking: Integrating AI, Life Cycle Assessment and Critical Raw Materials to Advance Circular Strategies
Mischa Ounanian (QuantoLux)
- Co-author in Slag Management: The Most Under- and Over-Estimated Success Factor in EAF Steelmaking
Aart Overbosch (Tata Steel IJmuiden)
- Co-author in Impact of New Iron Sources on Basic Oxygen Furnace Operations
Kwaku Owusu (Csiro)
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
Pamir Ozbay (Fero Labs)
- Author in Multi-Tiered AI Implementation for Slag Property and Alloy Prediction in EAF Operations: Operational Validation Access Three Steel Producers
Birgit Palm (VDEh-Betriebsforschungsinstitut BFI)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Gopal Pandey (Swinburne University of Technology)
- Author in Modelling of Hydrogen Flame Interaction with the Scrap Beds in Steelmaking Furnaces
Andrea Panizza (ORI Martin S.p.A.)
- Author in Industrial evaluation of biogenic secondary carbon carriers in electric arc furnace steelmaking: the BioReSTEEL approach
Dimitra Papamantellou
- Author in EAF - Trials with Scrap and solid iron in a 6 tonnes pilot furnace
Poomalai Paramasivam (EMSTEEL)
- Author in A Hybrid Physical–Machine Learning Framework for Real-Time Bath Oxygen and Carbon Soft Sensing in DRI-Based Electric Arc Furnaces
Poomalai Paramasivam (EMSTEEL Group)
- Author in Hybrid Metallurgical and Machine Learning Model for Temperature Prediction in DRI-Based EAF
Alessandro Parente (Professor)
- Author in Physics-Informed Reduced-Order Modeling for Temperature Prediction in Industrial Reheating Furnaces
JI-OOK PARK (POSCO)
- Co-author in Development of CO2 Emission Reduction Technology in Blast Furnace Process using H2 rich Gas Injection and Alternative Iron Ore Charging
Ji hyeon Park (Chosun University)
- Author in Effect of bottom-blowing pattern on the motion behavior of HBI at the bath surface in an EAF-typed water model
- Co-author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
Sung Hwan Park (Hanyang University, Department of Materials Science and Chemical Engineering)
- Author in Kinetic Study and Mechanism of SiO2 Reduction and Si Pick-up Reactions under Electric Smelting Furnace Conditions
- Co-author in Influence of Granulation Media on the Reactivity of Electric Arc Furnace Slag as Supplementary Cementitious Materials
JOO HYUN PARK (Hanyang University)
- Author in Sustainable steelmaking route for mitigation of CO2 emissions: Transition from blast furnace (BF) to electric smelting furnace (ESF)
- Co-author in Effect of Bottom-Blowing on Nitrogen Removal Kinetics in Electric Arc Furnace (EAF) Conditions
- Co-author in Influence of Granulation Media on the Reactivity of Electric Arc Furnace Slag as Supplementary Cementitious Materials
- Co-author in Kinetic Study and Mechanism of SiO2 Reduction and Si Pick-up Reactions under Electric Smelting Furnace Conditions
Tony Parkinson
- Author in EAF - Trials with Scrap and solid iron in a 6 tonnes pilot furnace
Krzysztof Pastucha (Primetals Technology)
- Author in Valorization of EAF Slag & Dust for High-Value Applications: Challenges and Technological Solutions
Henri Pauna (University of Oulu)
- Co-author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
- Co-author in Preliminary Results on the Melting of Individual Hydrogen Direct Reduced Iron Pellets in a Laboratory-scale Electric Arc Furnace
Stefano Pede (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
Tim Peeters (Tata Steel R&D, Netherlands)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Michael Peintinger (Smart Steel Technologies)
- Author in Optimized Scheduling for Electric Steelmaking: Integrating EAF, Secondary Metallurgy, Casting and Rolling for Throughput and Energy Efficiency
Augusto Pereira de Sá (Vale S.A.)
- Co-author in Assessment of SiO₂ and Al₂O₃ interchangeability in the DR-EAF Steelmaking Route
Klaus Peters (ESTEP)
- Author in Journey towards the decarbonization : ESTEP engagement for technical innovation
Alice Petrucciani (Scuola Universitaria Superiore Sant'Anna)
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Andrea Pezza (Badische Stahl Engineering GmbH)
- Co-author in BSE-EAF – Future-proof Melting. Automated System for safe, reliable & efficient operation
Andreas Pfeiffer (Primetals Technologies)
- Co-author in EAF versus Smelter + BOF – A Comparative Assessment for Low-Carbon Steelmaking
Robert Pierer (Austria)
- Author in Next Generation Raw-Material and Process Optimization in Electric Arc Furnace Steelmaking
Jean-Christophe Pierret (CRM Group)
- Author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Costanzo Pietrosanti (Danieli Automation S.p.A.)
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
Leonardo Pinna (Rina Consulting - CSM)
- Co-author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
Daniela Pircher (Technical University of Leoben)
- Co-author in Assessment of Oxide Alloying Elements in the Hydrogen Plasma Smelting Reduction (HPSR) Process
Luigi Pocaforza (Rina Consulting - CSM)
- Co-author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
Antonella Polimeno Camastra (ecoinvent association)
- Author in ecoinvent's integrated approach for Life cycle inventory datasets’ creation for metal manufacturing processes
Mark Pownceby (CSIRO Mineral Resources)
- Author in Evaluation of Ammonia-Based Direct Reduced Iron (NH3-DRI) and Its Implications for Subsequent Steel Making Process
Nikolaus Preisser (CDL-IMAS, Montanuniversität Leoben)
- Author in Influence of copper and tin on the oxidic cleanness and investigation of the agglomeration tendency of non-metallic inclusions in a medium-carbon steel
Eugene Pretorius (Nucor Steel Berkeley)
- Co-author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
- Co-author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
Christop Prietl (Primetals Technologies)
- Author in Valorization of EAF Slag & Dust for High-Value Applications: Challenges and Technological Solutions
- Co-author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Harsh Priyadarshi (ArcelorMittal Maizières Research SA)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Pengran Qi (University of Science and Technology Beijing)
- Author in Process Intensification of EAF-A New Perspective with Plasma
Yijun Quan (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
Cameron Quick (K1-MET GmbH)
- Co-author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Raghunath Rana (RHI Magnesita GmbH)
- Author in Implementation of Recycled Zr Slag band layer in submerged entry nozzle
Davide Razzari (Linde)
- Co-author in Energy-Optimized, Emissions-Reducing Technologies for EAF Steelmaking
Christian Redl (INTECO melting and casting technologies GmbH)
- Co-author in A Global Multiphysics Model of Flow Mechanisms in Industrial Scale DC Electric Arc Furnaces
Erwin Reichel (K1-MET)
- Author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Davide Ressegotti (Rina Consulting - CSM)
- Co-author in DRI/SCRAP blending in EAF practice. Impacts on slag composition, energy consumption and furnace productivity
Steven Reumschüssel (Saveway GmbH & Co. KG)
- Author in Refractory lining monitoring on different metallurgical vessels (EAF, LF, RH Degasser, Induction furnaces, plugs) with Saveway
Jon Reyes Rodriguez (ArcelorMittal Basque Country Research Centre AIE)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Ahmad Rizky Rhamdani (Swinburne University of Technology)
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
M.A Rhamdhani (Swinburne University of Technology)
- Author in Evaluation of Ammonia-Based Direct Reduced Iron (NH3-DRI) and Its Implications for Subsequent Steel Making Process
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Johannes Rieger (K1-MET GmbH)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Christian Rodrigues (Montanuniversitaet Leoben, Department of Metallurgy)
- Author in Towards Better Furnace Design: Minimizing Energy Consumption Through Controlled Freeze Lining Formation
Filipe Rodrigues (TMT Luxembourg)
- Co-author in Measuring Technologies for DRI-fed Electric Arc Furnaces
Tamara Rodriguez (Sidenor Aceros Especiales)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Joseba Rodriguez
- Author in VIDEOMAG: high duty video technology applied to supervision of guning application in an EAF
- Author in VISIOMAG: Advanced Technology for Safe and Efficient Refractory Monitoring in the Steel Industry
Andreas Rohrhofer (Primetals Technologies Austria)
- Author in Closed-Loop Optimization for Energy Efficiency and Scrap Utilization in Steelmaking at Marcegaglia Sheffield
Matteo Carmelo Romano (Politecnico di Milano)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Laine Rounsaville
- Co-author in A System and Best Practice to Reduce Electrode Pin Breaks
Bapin Rout (Tata Steel IJmuiden)
- Author in EAF - Trials with Scrap and solid iron in a 6 tonnes pilot furnace
- Co-author in Impact of New Iron Sources on Basic Oxygen Furnace Operations
Philippe Russo (ArcelorMittal Maizières Research SA)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Christian Rust (INTECO melting and casting technologies)
- Author in Scrap-Aware Adaptive Process Control for Electric Arc Furnaces
ION RUSU (BM Group)
- Author in Enhancing EAF safety and efficiency
- Author in Intelligent Scrap Yard Mapping and Sorting with Vision Systems for Process Optimization
Jin-Ho Ryou (POSCO Technical Research Laboratories)
- Co-author in Co-combustion characteristics of PCI coal and alternative carbonaceous fuel for blast furnace operation
Shabnam Sabah (Swinburne University of Technology)
- Author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
- Co-author in Heat Transfer Mechanisms in Electric Smelter Furnaces for Ironmaking
- Co-author in Impact of New Iron Sources on Basic Oxygen Furnace Operations
Mohammad Safi (ArcelorMittal Hamburg GmbH)
- Co-author in Digital Regulator-Based Control Strategies for Electric Arc Furnace
Donatella Salvatore (Scuola Superiore Sant'Anna)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
Bharath Sampath-Kumar (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
Mathieu Sanchez (GE Vernova)
- Author in Direct Feed to Enhance Power Quality and EAF performance
Stéphane Sanchez (ArcelorMittal Belval-Differdange)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Roberto Scaccabarozzi (Laboratorio Energia & Ambiente Piacenza)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Alexander Schicker (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Alexander Schlemminger (QuantoLux GmbH)
- Author in Modern in-situ Slag adjustment for EAF, BOF, LF, and VD Steelmaking
- Author in Slag Management: The Most Under- and Over-Estimated Success Factor in EAF Steelmaking
Marvin Schmidt (TMT Luxembourg)
- Author in Measuring Technologies for DRI-fed Electric Arc Furnaces
Simon Schneiderbauer (JKU Linz)
- Co-author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Dingena Schott (Faculty of Mechanical Engineering, Delft University of Technology)
- Co-author in A Time-based Pellet Melting Approach to Model Feed Pile Formation in Electric Smelting Furnace
Antonius Schröder (TU Dortmund University)
- Author in Skills for Industrial Symbiosis and Energy Efficiency (Skills4EII)
Jacob Schulman (Purdue University Northwest)
- Author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
Carl Schwabe
- Co-author in A System and Best Practice to Reduce Electrode Pin Breaks
Ralf Schweikle (Badische Stahl-Engineering GmbH)
- Author in BSE-EAF – Future-proof Melting. Automated System for safe, reliable & efficient operation
Mauro Scocco (ABS acciai)
- Author in ABS ROADS EVO - Stage II
Gangadharan Seenivasan
- Author in Biochar utilization in DRI-based EAF steelmaking
Nicola Segnali
- Author in Image-Based Steel Scrap Mixture Recognition Using Deep Neural Networks
Christian Senes (Acciaierie di Calvisano)
- Author in Coupling innovative sensors, process modelling and data analysis for the improvement of EAF performances and sustainability of steel production for Acciaierie di Calvisano
Claudia Sergi (RINA CONSULTING - Centro Sviluppo Materiali SPA)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Dae-Hoon Shin (Hyundai steel)
- Co-author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
Qifeng Shu (University of Oulu)
- Co-author in Effect of hydrogen oxyfuel combustion on oxide scale descability by thermal shock for low-carbon steels
Arslan Siddique (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
Christof Sihler (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Kirill Sinelshchikov (SIM4Future srls)
- Co-author in Simulation Based Training for Industrial Operations: Interactive Learning for Complex Tasks
SURYA PRATAP SINGH (SWINBURNE UNIVERSITY)
- Author in Potential use of Bio-Coke in Electric Arc Furnace for Steel Production
Gulvir Singh (Guru Nanak Dev Engineering College, Ludhiana)
- Author in Energy and CO₂ Reduction in Steel Reheating and Hot Rolling through Intelligent Furnace Control and Delay-Aware Process Integration
Daniel Sipos (RHI Magnesita)
- Co-author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
James Small (Tata Steel Nederland)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Andrew W.A. Smith
- Author in EAF - Trials with Scrap and solid iron in a 6 tonnes pilot furnace
Delphine Snaet (European Steel Technology Platform ASBL)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Geir Solheim (7-Steel Nordic)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Xingqiang Song (Swerim AB)
- Co-author in Metallurgical biocarbon as a decarbonization strategy: Policy drivers and industrial implications from a Swedish perspective
Nico Sontacchi (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Aintzane Soto Larzabal (Sidenor Aceros Especiales)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Juliette Soulard (University of Warwick)
- Co-author in Research for Redesigning the Steel Scrap System
Maurizio Spinelli (Laboratorio Energia & Ambiente Piacenza)
- Co-author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Stephen Spooner (Coventry University)
- Co-author in Engineering Rapid Automotive Materials Sustainability (e-RAMS): Upstream conditioning of ELV scrap for high-quality steelmaking
Daniel Spreitzer (Technology Ironmaking)
- Co-author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Martin Sprunk (SECOPTA analytics GmbH)
- Author in Process improvements by real-time on site analysis of metallurgical processes
Kinshuk Srivastava (Stahl-Holding-Saar GmbH & Co. KGaA)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Raeto Stadler (ABB)
- Author in Evolving AC electric steelmaking – from thyristor based digital power supply solutions to the next generation advanced furnace power control system
Patrick Stahl (MIRECO)
- Co-author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Thomas Steinwiedder (INTECO melting and casting technologies)
- Author in Scrap-Aware Adaptive Process Control for Electric Arc Furnaces
Christophe Stocky (ABS Centre Métallurgique)
- Author in Development process of the EAF produciton route with new slag management for high silicon steel grade (54SiCr6) for automobile spring steel and low carbon grades (SG2-SG3) for welding wire, from scrap yard to wire rod coil. Lesson learned and future improvements.
Michael Strelbisky (Tallman Technologies Inc.)
- Author in Quantification and Mitigation of Direct CO2 Emissions EAF Steelmaking
Aaron Strelbisky
- Author in Quantification and Mitigation of Direct CO2 Emissions EAF Steelmaking
Vladimir Strezov (Macquarie University)
- Author in Biochar application for sustainable ironmaking using electric smelting furnace
Fabrizio Strobino (Paul Wurth Italia S.p.A (SMS group))
- Author in Development of Sustainable Silica-Alumina Insulating Refractories for Coke Oven Applications
Uwe Stummhöfer-Jähnichen (RHI Magnesita)
- Co-author in From Concept to Continuous Improvement – Stahlwerk Thüringen as a Lighthouse for RHI Magnesita’s 4PRO Business Model
Jean-Francois Stumper (TMT Tapping Measuring Technology)
- Author in Measuring Technologies for DRI-fed Electric Arc Furnaces
Petri Sulasalmi (University of Oulu)
- Co-author in A comparison of simulated and analysed phase compositions of solidified EAF slags
- Co-author in Dynamic Modeling and Optimization of Electric Arc Furnace Operation: Coupling Energy, Oxygen, and Slag Chemistry
- Co-author in Preliminary Results on the Melting of Individual Hydrogen Direct Reduced Iron Pellets in a Laboratory-scale Electric Arc Furnace
Zhi Sun (Institute of Process Engineering, Chinese Academy of Sciences)
- Author in Process Intensification of EAF-A New Perspective with Plasma
Yuhan Sun (University of Oulu)
- Author in Monitoring the Ar-plasma pre-melting of fluxed Cr2O3 and iron oxides in a lab-scale electric arc furnace
Sumit Sundaram (RHI Magnesita)
- Co-author in Inert Gas Stirring in Electric Arc Furnaces: Metallurgical Benefits with a focus on medium- and high-alloyed steelmaking.
Sumit Sundaram (RHIMAGNESITA)
- Co-author in 3D measurement assisted bottleneck reduction in stainless steel production
Lena Sundqvist Öqvist (Luleå University of Technology)
- Co-author in Biochar utilization in DRI-based EAF steelmaking
Klaus Supancic (BIOS Bioenergiesysteme GmbH)
- Author in Biochar as a substitute for fossil-based injection coals in EAF operation – definition of criteria for material suitability based on lab tests, particle conversion modelling and industrial injection trials
Valeria Superti (ecoinvent association)
- Author in ecoinvent's integrated approach for Life cycle inventory datasets’ creation for metal manufacturing processes
Kumar Babu Surreddi (Luleå University of Technology)
- Co-author in Effect of Al2O3 on structure and viscosity of EAF slag system
Rahman Faiz Suwandana (Luleå University of Technology)
- Author in Effect of Al2O3 on structure and viscosity of EAF slag system
Akhilesh Swarnakar (ESTEP)
- Co-author in Journey towards the decarbonization : ESTEP engagement for technical innovation
Amr Tarek Helmy (Al Ezz Dekheila Steel Company (EZDK))
- Co-author in More dynamic carbon injection: a novel approach for slag foaming control in EAF steelmaking with continuous charge feeding
Saeed Tavakoli (PhD Researcher)
- Author in A Time-based Pellet Melting Approach to Model Feed Pile Formation in Electric Smelting Furnace
Michele Maria Tedesco (Centro Ricerche Fiat S.c.p.a.)
- Co-author in From Scrap to Safety: Low-CO₂ Steels in Automotive Applications
Mattia Tellaroli (FERALPI SIDERURGICA)
- Author in New approaches for CO2 emissions reduction and process performances improvement in EAF thanks to application of deep process modelling and control to scrap melting and slag foaming
lidong Teng (ABB Metallurgy, ABB AB)
- Author in Driving efficiency in stainless steel production: Demonstrated impact of electromagnetic stirring on a 65-ton AC electric arc furnace at Walsin Lihwa
Franck Terrien (GE Vernova)
- Co-author in Next Generation Direct Feed MV Power Supply for Large Steelmaking EAFs
Kyle Tew (Steel Dynamics)
- Co-author in Operating experiences with Spray Cooled EAF conversion at SDI Columbia City
Kathrin Thiele (Technical University of Leoben)
- Author in Implementation of Novel Tracing Techniques to Control Steel Cleanness in CO2‑Neutral Steelmaking
- Author in Influence of copper and tin on the oxidic cleanness and investigation of the agglomeration tendency of non-metallic inclusions in a medium-carbon steel
Orlando Toscanelli (Scuola Superiore Sant’Anna – TeCIP – ICT-COISP)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Tiara Triana (Swinburne University of Technology)
- Co-author in Evaluation of Ammonia-Based Direct Reduced Iron (NH3-DRI) and Its Implications for Subsequent Steel Making Process
Marco Truant (Acciaierie Bertoli Safau)
- Author in Development process of the EAF produciton route with new slag management for high silicon steel grade (54SiCr6) for automobile spring steel and low carbon grades (SG2-SG3) for welding wire, from scrap yard to wire rod coil. Lesson learned and future improvements.
paul trunner (Primetals Technologies)
- Author in Environmental Compliance and Energy Efficiency Strategies for Electric Arc Furnace Steelmaking
Christoph Turk (voestalpine Böhler Edelstahl GmbH & Co KG)
- Co-author in Thermodynamic Assessment of Metallurgical Processes Using Thermo-Calc and MATLAB Integration
Seiji Uchida (JFE Steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Orlando Ugarte (Purdue University Northwest)
- Author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
- Co-author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
Lucia Unamunzaga (Fundacion Azterlan)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Ilia Ushakov (ArcelorMittal Maizières Research)
- Author in The Study of Different Ca Cored Wires on Calcium Treatment Process
Louis Valentas
- Author in Operating experiences with Spray Cooled EAF conversion at SDI Columbia City
Johan van Boggelen (Tata Steel)
- Author in HIsarna – smelting reduction for a carbon neutral steel industry
Frenk van den Berg (Tata Steel Europe)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Casper van der Eijk (SINTEF Industry)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Frank van de Winkel (TOMRA Sorting GmbH)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Sebastiaan van Dorp (Calix)
- Co-author in Thermodynamics and Kinetic Modelling of Flash Reduction Ironmaking
Marie-Aline van Ende (Seoul National University)
- Co-author in Investigating the performance of Electric Smelting Furnace for green iron and steelmaking using feed material of varying quality: Insights from pilot-scale melting and hydrogen-based reduction trials
Yves Van Ingelgem (Zensor)
- Author in Hot Heel estimation: How system dynamics can be used for multiple purposes
Marco Vannucci (Scuola Superiore Sant'Anna, TeCIP Institute)
- Author in Automated Noise Source Identification in Steel Plants Using Deep Learning
- Author in Computer Vision-Based Copper Detection for Electric Arc Furnace Scrap Quality Enhancement
- Author in Development of Intelligent Monitoring Systems for Anomaly Detection in Electric Arc Furnace Steelmaking
- Co-author in Improving Safety in Steelmaking Operations through Advanced Computer Vision and Machine Learning within the iSteel-Expert Project
Marco Venturini (SMS Group)
- Co-author in Circular Carbon and Electrified Heat: Carbon neutral Syngas heated by Paul Wurth Tempra to reduce Blast Furnace CO₂ Emissions
Dirk Verbeken (ArcelorMittal Belgium NV)
- Co-author in Conclusions of CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Miranda Verboon (Tata Steel IJmuiden, Netherlands)
- Co-author in HIsarna – smelting reduction for a carbon neutral steel industry
Ville-Valtteri Visuri (Process Metallurgy Research Unit, University of Oulu)
- Author in Mathematical Modelling of Slag Phase Composition during the EAF Process in Stainless Steelmaking
- Co-author in Dynamic Modeling and Optimization of Electric Arc Furnace Operation: Coupling Energy, Oxygen, and Slag Chemistry
- Co-author in Preliminary Results on the Melting of Individual Hydrogen Direct Reduced Iron Pellets in a Laboratory-scale Electric Arc Furnace
Olli Vitikka (University of Oulu)
- Co-author in Pellet porosity changes under simulated blast furnace shaft conditions
Thomas Voglhuber-Brunnmaier (JKU Linz)
- Author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
Joachim von Scheele (Linde GmbH)
- Author in Successful Full-Scale Implementation of Decarbonization Through Energy Efficiency and Use of Hydrogen
- Co-author in Energy-Optimized, Emissions-Reducing Technologies for EAF Steelmaking
Bernhard Voraberger (Primetals Technologies)
- Author in Valorization of EAF Slag & Dust for High-Value Applications: Challenges and Technological Solutions
- Co-author in EAF versus Smelter + BOF – A Comparative Assessment for Low-Carbon Steelmaking
- Co-author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Bojan Vucininc (Danieli & C.)
- Author in Sulphur control as part of steelmaking transition. Challenge or opportunity
Guang Wang (Lulea University of Technology)
- Co-author in In situ observation of metal-slag separation and inclusion motion at the surface of hydrogen-based direct reduction iron melt
Chuan Wang (Process Metallurgy, Swerim AB, Luleå, Sweden)
- Author in Pilot-Scale Evaluation of Hydrochar Utilization in Electric Arc Furnace Steelmaking: Results from the BioReSteel Project
Haijuan Wang (University of Science and Technogogy Beijing)
- Author in Process Intensification of EAF-A New Perspective with Plasma
Guangwei wang (University of Science and Technology Beijing)
- Author in Performance analysis and substitution potential of biomass charcoal as foaming agent for EAF
Chuan Wang (Swerea MEFOS)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Mu Wangzhong (Lulea University of Technology)
- Author in In situ observation of metal-slag separation and inclusion motion at the surface of hydrogen-based direct reduction iron melt
- Co-author in Effect of Al2O3 on structure and viscosity of EAF slag system
Gerd Weides (Saarstahl AG)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Klaus Weinzierl (Primetals Technologies Germany GmbH)
- Author in Application of Modular Multilevel Converters in Electric Arc Furnace Systems
Jan-Thijn Wijnker (Faculty of Mechanical Engineering, Delft University of Technology)
- Co-author in A Time-based Pellet Melting Approach to Model Feed Pile Formation in Electric Smelting Furnace
Arndt Wilhelmi (Lechler GmbH)
- Author in Nozzle, skids and demisters have big influences on cleaning efficiency in off gas systems
Gerald Wimmer (Primetals Technologies)
- Author in EAF versus Smelter + BOF – A Comparative Assessment for Low-Carbon Steelmaking
- Author in Valorization of EAF Slag & Dust for High-Value Applications: Challenges and Technological Solutions
Gerald Wimmer (Head of Steelmaking)
- Co-author in Hy4Smelt – Industrial Demonstration Project to Proof Potential Net-Zero Ironmaking by Combining Breakthrough HYFOR® and Smelter Technologies
Klemens Winkler (K1-MET GmbH)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Bernd Wolter (Fraunhofer IZFP)
- Co-author in Sensor and digital twin solutions developed in DiGreeS project for improvement of scrap-based EAF steelmaking
Hongwei Wu (Curtin University)
- Author in Potential use of Bio-Coke in Electric Arc Furnace for Steel Production
Menghuai Wu (Montanuniversitaet Leoben, Department of Metallurgy)
- Co-author in Towards Better Furnace Design: Minimizing Energy Consumption Through Controlled Freeze Lining Formation
Christian Wuppermann (IOB RWTH Aachen)
- Co-author in Machine Learning-based Scrap Characterization for Process Optimization in Electric Arc Furnaces
- Co-author in Recent research, planned equipment upgrades and future work at the pilot EAF at RWTH Aachen University
Michel Wurlitzer
- Author in Digital Regulator-Based Control Strategies for Electric Arc Furnace
Bin Xiao (Tata Steel Research and Innovation Limited)
- Co-author in Research for Redesigning the Steel Scrap System
Yingtie XU (Baoshan Iron and Steel Co., Ltd.)
- Author in Performance analysis and substitution potential of biomass charcoal as foaming agent for EAF
Anjun Xu (university of science and technology beijing)
- Co-author in Temperature prediction model in an electric arc furnace based on data-driven
Tetsuya Yamamoto (JFE steel)
- Author in Mitigation of CO$_2$ Emissions from Blast Furnaces through Injection of Carbon-Recycled Reducing Agents with High Heat Supply via Partial Combustion
Zhiming Yan (Chongqing University)
- Co-author in Fundamental Understanding of Modified Electric Arc Furnace Slag for the Production of Electric Cement
Ik-Jun Yang (EZ CASTECH)
- Co-author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
Mingrui Yang (University of Warwick)
- Co-author in Fundamental Understanding of Modified Electric Arc Furnace Slag for the Production of Electric Cement
Yongxiang Yang (Associate Professor)
- Co-author in Assessment of Biochar Production and Integration into HIsarna Ironmaking
Yusuke Yasufuku (Kenichi Fujii)
- Co-author in Optimization of Water Heating in Steel Sheet Cleaning through Multi-Stage Heat Exchange and Heat Pump Integration
Chae-Yeon Yoo (Hyundai steel)
- Co-author in Integrated Multi-institutional Approach to EAF bottom blowing technology development: Scaled Physical Model Verification, CFD Simulation, and Industrial Application
Han Yu (Swerim AB)
- Author in Targeting and supporting Industrial Symbiosis in the steel industry through the Symbio-Steel project
Antonella Zaccara (Scuola Superiore Sant’Anna – TeCIP – ICT-COISP and Università di Padova)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions
Majid Zamani (Tallman Technologies Inc.)
- Author in Quantification and Mitigation of Direct CO2 Emissions EAF Steelmaking
Maurizio Zanforlin (ORI Martin S.p.A.)
- Author in Industrial evaluation of biogenic secondary carbon carriers in electric arc furnace steelmaking: the BioReSTEEL approach
- Co-author in Valorisation of EAF dust by agglomeration and recycling back to process
Michael Andreas Zarl (K1-Met GmbH)
- Co-author in Stability Enhancement of DC Arcs in Reducing Argon-Hydrogen Atmospheres via Current Regulation
YUNTIAN ZHANG (UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING)
- Author in The Effect of Ce Content on NbC precipitate in S30432 Austenitic Heat-resistant Steel
Jian Zhao
- Author in High-Cleanliness Production of Crankshaft Steel through Optimization of Slag Composition
Xiaohong Zheng (Institute of Process Engineering, Chinese Academy of Sciences)
- Author in Process Intensification of EAF-A New Perspective with Plasma
Deng Zhengwei (Best Power Intercontrol)
- Co-author in Design and Implementation of a Fuzzy Controller for Inter-Stand Tension in a Tandem Mill
Chenn Zhou (Purdue University Northwest)
- Co-author in CFD modeling of supersonic jet impingement on molten bath during electric arc furnace refining
- Co-author in Optimization of electric arc furnace refining via CFD simulation of steel, slag, and freeboard dynamics
Qing Zhu (Lulea University of Technology)
- Co-author in In situ observation of metal-slag separation and inclusion motion at the surface of hydrogen-based direct reduction iron melt
ANNA ZOPPIROLLI (POLYTEC SPA)
- Co-author in Enhancing EAF safety and efficiency
- Co-author in Intelligent Scrap Yard Mapping and Sorting with Vision Systems for Process Optimization
Asier Zubero Lombardia (Sidenor Aceros Especiales)
- Co-author in Use of alternative carbon bearing materials in electric arc furnace: potential for multiple industrial symbiosis and process integration solutions

Choose timezone

EEC 2026 - 14th European Electric Steelmaking Conference & EMECR 2026 - 5th International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry

Organising secretariat