7th European Steel Technology and Application Days - ESTAD 2025

Name: 7th European Steel Technology and Application Days - ESTAD 2025
Start: 2025-10-06T16:00:00+02:00
End: 2025-10-09T15:30:00+02:00
Location: Palaexpo Veronafiere

6–9 Oct 2025

Palaexpo Veronafiere

Europe/Rome timezone

Conference Registration is open now!

Contact

Author List

유빈 이
- Author in Optimizing Biomass Gasification-Driven Carburization for Carbon-Neutral Hydrogen-Based Steelmaking
Marco Abram (SMS group)
- Author in On the application of FEMS and MSR technologies on the continuous casting of long products
- Author in The new MSR bloom caster at Saarloha Advance Materials, Pune
- Co-author in Energy recovery in long product casting
- Co-author in High Speed Billet Casting: Introduction of a new Billet CCM at Tosyalı Demir Çelik
- Co-author in Innovative Continuous Minimill Technology (CMT®) for sustainable long product production
Vaibhavkumar Acharya (Hatch)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
M. Acone (Politecnico di Milano)
- Co-author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
Jörg Adam (VDEh-Betriebsforschungsinstitut GmbH)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Bernhard Adami (K1-MET GmbH)
- Author in Advancing hydrogen plasma smelting reduction: Experimental insights from a demonstration plant
Joyce Aderhold
- Author in Optimizing DRI Production with Lime-Based Coatings Agents
Pepijn Adriaen (CRM Group)
- Author in Smart controlled actuator to homogenize the temperature of the transfer bar
Jelle Agema
- Co-author in CFD and FEM study on redesigning the mould geometry of the thin slab caster of Tata Steel in IJmuiden for enhanced casting performance
Anshuman Agrawal (Minimac Systems Pvt Ltd)
- Author in Oil Reconditioning in Metal Manufacturing
Linda AHL (GreenIron)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Hesham Ahmed (Luleå University of Technology)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Jeongwoo Ahn (Hyundai-steel)
- Co-author in Development of Oxygen-fuel Burner Design for Electric Arc Furnaces under Supersonic Flow Conditions
amit ahsan (SECOPTA analytics GmbH)
- Author in Fast process slag analysis with laser spectroscopy, opening new opportunities for active optimization during melting and refining process.
- Author in Fully automated antimixup solution with LIBS technology, ensuring 100% check of the bar and billet proven over years of process operation.
- Author in Inline intermix detection by laser spectroscopy, increasing the metallurgical output in continuous casting strand.
Michael Aigner (Eisenwerk Sulzau-Werfen R. & E. Weinberger AG, Tenneck, Austria)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Veikko Äikäs (SEW-EURODRIVE)
- Author in Optimized availability of a mechanical drive system through holistic predictive maintenance approach
David Aišman (Research and Testing Institute Pilsen)
- Co-author in Hydrogen Embrittlement in Pipeline and Cast Steels for Gas Transport Infrastructure
Mustafa Alican Akkol
- Co-author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
Sitki Can Akkus
- Author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Muhammad Waseem Akram (Scuola Superiore Sant'Anna)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
Francesca Albano
- Author in How can Life Cycle Assessment support the definition of decarbonization strategies: lessons learnt from the GreenHeatEAF project
Valentina Alemanno (RINA Consulting - Centro Sviluppo Materiali)
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
- Author in Kinetics of Direct Reduction of iron ore pellets: understanding rate-limiting steps in hydrogen-based reduction of low- and high-grade pellets
- Author in Safe H-DRI: advancing the production, transport and storage of Hydrogen-based Direct Reduced Iron (H-DRI) for sustainable steelmaking
Luigi Alessio (SMS group)
- Co-author in Yield increase by hot strand coating in continuous casting of long product
David Algermissen (FEhS - Institut für Baustoff-Forschung e.V.)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Nasser Al-Hammadi
- Co-author in Revolutionizing Triple Slitting Technology for Rebar 16mm in the rolling and groove process design: QATAR Steel & POMINI Long Rolling Mills technologies
Johannes Alken (SMS group)
- Co-author in Sustainable repairs of machine parts in rolling mills by advanced coating technologies
Marco Alloni (Prosimet S.p.A.)
- Author in BORON IN CASTING POWDER: INSIGHTS FROM PROSIMET STUDIES
Eric Almquist (Star Tool & Die Works)
- Author in Advancing Online, Continuous Surface Cleanliness Monitoring with the TST.1 System
- Author in Exploring the Potential of Machine Vision (MV) and Artificial Intelligence (AI) in Steel Production
- Author in Mitigating Worker Skills Gaps using Digital Workflows & Mixed Reality
- Author in Technical Overview of Unique Non-Woven Process Rolls
Lucas Almquist Pessoa (SSAB)
- Co-author in Relaxation and creep in hot coiled steel strip
Alejandro Álvarez Castro (UPM)
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Adrián Álvarez Vázquez (ArcelorMittal)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
Oscar Antonio Amato (Fomas spa)
- Author in A combined experimental–numerical approach to assess the effects of quenching transfer time on the microstructure and mechanical properties of a Ti-6Al-4V alloy
Masahiro Ambiru (Tohoku University)
- Author in Enhancement of tramp elements removal from liquid iron by molten oxysulfide electrolysis
Marieh Aminaei
- Author in Hydrogen direct reduction of iron ores: effect of agglomeration
Saeid Amirzadeh
- Author in An OpenFOAM Eulerian-Lagrangian Model of a Polydisperse Bubbly Flow in a Continuous Casting Mould
Charlotte Andersson (Luleå University of Technology)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Nils Andersson (Swerim AB)
- Author in A novel approach to cracking criteria in continuous casting
Joelson Andrade Cavalcante (ArcelorMittal Tubarão)
- Author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Ettore Anelli (Franchini Acciai SpA)
- Author in Effect of Intermediate Intercritical Quenching on Low Temperature Toughness of Low-alloy Steel Forgings
Lorenzo Angelini (Feralpi)
- Author in Modular hybrid technology in the steel plant production
Lorenzo Angelini (Feralpi)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Lorenzo Angelini (Feralpi)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Lorenzo Angelini (Acciaierie di Calvisano S.p.a. Feralpi Group - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Lorenzo Angelini (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Kai Ankermann,
- Author in FROM DATA TO DECISION: UNIFYING PRODUCTION MANAGEMENT AND TPQC FOR OPTIMIZED STEEL PRODUCTION
Ludvig Ånnhagen (Vargön Alloys AB)
- Author in Innovative Approaches To Sustainable FeCr Production Through Biocarbon and H2 Utilization
Joachim Antonissen (Guaranteed)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
Matteo Appiani (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Sinan Aras (MATIL Co.)
- Co-author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Kevin Ardon (ArcelorMittal Maizières Research)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Pierluigi Argoneto (YOURSCIENCEEDU SRL)
- Author in Demonstration of XR experience via Hands-On Session
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Raquel Arias Perez (Sidenor Aceros Especiales,)
- Co-author in Slag changes in future steelmaking scenarios: simulation investigations
Asier Arteaga Ayarza (SIDENOR)
- Author in Replacement of Conventional Gas Burners with Electrical Resistive Heating for Tundish processes: A Sustainable Approach within the CITADEL Project
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Chiara Artini (Laboratorio Energia & Ambiente Piacenza)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Chiara Artini (Laboratorio Energia & Ambiente Piacenza (LEAP))
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
Matthias Arzberger (SMS group)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
- Co-author in Case study on the improved reliability and efficiency of the HD moldFO+ fiber optic mold monitoring system
- Co-author in Improvement of Breakout Prevention for startup stability enhancement in high productivity thin slab casters
Ronald E. Ashburn
- Author in Making Steel Great Again: U.S. Steel Production in the Trump Era
Giacomo Astolfi (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Alireza Atf (K1-MET)
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
Evangeline Athoy (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Luiz Augusto Wasem (ArcelorMittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Luiz Augusto Wasem (ArcelorMittal Tubarão)
- Author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Matti Aula
- Author in Optimized Control of an EAF off-gas system by Video Analysis
Peter Austin (BlueScope Steel)
- Co-author in Influence of HDPE addition on microstructure transformation during coking of Australian coking coals
Eyouiléki Awi (UGITECH)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Fredrik Axelsson (Alleima)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Fatemeh Azizi
- Author in Estimating Reheating Time for Steelmaking Ladles Using Optimization-Based Machine Learning Approach Integrated with a Physical Thermal Model
Michael Babel (SMS group)
- Co-author in Utilizing BOF/EAF Energy Recovery for Vacuum Generation in RH and VTD Type Degassers
Linda Bäcke (SSAB EMEA AB)
- Co-author in New insights from the online LUS grain size measurements
- Co-author in Online and Real-Time Recrystallized Fraction Estimation in Steel Rolling Processes by Laser Ultrasound
Gioele Badina (Acciaierie di Calvisano)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Min-Seok Baek (Hyundai Steel Company)
- Co-author in A Study on enhancing accuracy of AI-based RDT automatic control in hot rolling process
Stefano Baf
- Author in Electromechanical servo drive for mold level control: performance and evolution
- Author in Enhancing the Quality of Continuously Cast Products: Optimized Caster Design and Process Tuning for High-Quality Blooms
- Author in Mould design optimisation for beam blank production
Cetin Baglan (MATIL Co.)
- Co-author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Sean Baker (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Saeid Bakhtiari (K1-MET GmbH, Stahlstrasse 14, 4020 Linz, Austria. Institute of Materials Science, Joining and Forming at the Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria)
- Author in Influence of different C, Ti, B, Mn, and Al content on hot ductility behavior of two micro-alloyed steel at different strain rates
Gina Bakker-Paez (Danieli Corus)
- Author in Dry Blast Furnace Gas Cleaning: Technology and Operational Experiences
Mauro Baldassi (Danieli & C. Officine Meccaniche S.p.A.)
- Author in ENERGY SAVING ON A 70 MN OPEN DIE FORGING PRESS
Giovanni Baldo (Fassa Bortolo)
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
Federico Baldussi (Università degli studi di Brescia)
- Author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Andreas Ban (VDEH-Betriebsforschungsinstitut)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Marc Banaszak (mecorad GmbH)
- Author in CC Process optimization through combined digital twin and in-line measurement technology for a stainless-steel slab production
Giovanni Banchero
- Author in INNOVATIVE APPROACH IN STEELMAKING REFRACTORY APPLICATIONS
Mehdi Baniasadi (SMS group)
- Co-author in Implementation of EASyMelt with Ammonia and HBI Charging to Achieve Ultra Low Carbon Ironmaking
Daohua Bao (State Key Laboratory of Advanced Metallurgy, University of Science and Technolog)
- Author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
Francesco Barberini (University of Bologna)
- Author in Novel production route of fully processed high-Si NGO steels for e-mobility at Marcegaglia Ravenna plant
David Barbier (Fives KEODS)
- Author in Continuous Annealing and Galvanizing Line electrification: decarbonation as a new opportunity to produce HSS and AHSS by flash annealing
Silvia Barella (Politecnico di Milano)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
- Author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
- Co-author in Development of Functional Graded Materials through Sintering of Layered Metal Powders
- Co-author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
- Co-author in Multi-alloy production via chips compaction and hot rolling
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
Gerd Baresch
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
Norma Bargary (University of Limerick)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Marvin Bargon (Chemische Fabrik Budenheim KG)
- Co-author in Yield increase by hot strand coating in continuous casting of long product
Martin Barna (Institute of Fluid Mechanics and Heat Transfer, Johannes Kepler University Linz)
- Co-author in Continuous Casting Mold Flow with Original and Used Nozzle Geometries: Numerical Flow Simulations and Water Model Measurements
Marco Bartoletti (Arvedi Tubi Acciaio S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Hauke Bartusch
- Author in Monitoring of blast furnace wall pressure profiles and their relation to process efficiency
- Co-author in Hydrogen Pulse Injection into the Blast Furnace Shaft
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Matthias Bärwald (EMG Automation GmbH)
- Author in New insights from the online LUS grain size measurements
Duro Basic (GE VERNOVA)
- Author in Direct Feed Power Supply to enhance power quality and EAF KPI
Iker Basterretxea (ArcelorMitta Sestao)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Suvro Basu (Danfoss)
- Author in INNOVATION IN FREQUENCY CONVERTERS TO REDUCE DOWNTIME AND IMPROVE PRODUCTIVITY IN STEEL PLANT
Noris Battocletti (Arvedi Tubi Acciaio S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Bernhard Bauer (LCM)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Hans-Jörg Baumgartner (Primetals Technologies Linz GmbH)
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
Kerstin Baumgartner
- Author in Bow-Type Continuous Casting: A New Era in Ultra-Thick Slab and Heavy Plate Manufacturing
Joke Bauwens
- Author in Hurricane – Sector coupling hub for circular use of thermal and industrial waste
Giovanni Bavestrelli (Tenova S.p.A.)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
Mutlucan Bayat
- Author in Hydrogen direct reduction of iron ores: effect of agglomeration
Shahab Bazri (Dipartimento di Meccanica - Politecnico di Milano)
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
Gianluca Bazzaro (Danieli)
- Author in Finite Element Thermo-Mechanical Modeling of Continuous Casting: Simultaneous In-Mould Solidification and Mould Condition Analysis for High-Speed Billet Casting with Danieli’s Power Mould™
Steve Beaudin (Metal7 Inc.)
- Co-author in Improving Direct Reduction Operation efficiency through Roller Screen technology
Hayane Bechyne
- Author in FROM DATA TO DECISION: UNIFYING PRODUCTION MANAGEMENT AND TPQC FOR OPTIMIZED STEEL PRODUCTION
Alexander Beel (cunova GmbH)
- Author in Cu+: A New Standard in Slab Mould Plate Design for Cost-Effective Steel Production
Peter Beentjes (Tata Steel Nederland Technology B.V.,)
- Author in Investigation on the use of organic acids to pickle the oxide scale of carbon steel hot rolled strips
Danny Beentjes (Tata Steel, IJmuiden, Netherlands)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Holger Behrens (SMS group)
- Co-author in Advancements and future prospects of zero emission galvanizing technologies
Serap Bektas (SMS group)
- Co-author in Ammonia as a Cost-Effective Energy Carrier for Decarbonization in the European Steelmaking Industry
Marco Belfi (Politecnico di Milano)
- Author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
- Co-author in Development of Functional Graded Materials through Sintering of Layered Metal Powders
- Co-author in Multi-alloy production via chips compaction and hot rolling
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
Philipp Bermes (SMS group)
- Co-author in Ecologic and Economic Evaluation of COG Injection and Comparison with other Fuel Gas Injection Systems
Maximilian Bernds (VDEh Betriebsforschungsinstitut,)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Christian Bernhard (Montanuniversitaet Leoben)
- Co-author in High temperature oxidation in steel processing under different process conditions, atmospheres and rising levels on tramp elements
- Co-author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
- Co-author in Influence of the cooling strategy on the intergranular crack formation during continuous casting of TRIP steels produced from low-grade scrap
- Co-author in Machine learning model for mould powder consumption in continuous steel casting
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Jonny Bernhardt (Mercedes-Benz AG)
- Author in On the influence of EAF based steelmaking on AHSS
Massimiliano Bersani (Acciaierie di Calvisano)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Nadine Berthelemy (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Guido A. Berti (Project Group s.r.l.)
- Co-author in Optimization of Process Control and Energy Consumption in Hot Flat Ring Rolling Using Interactive Real-Time Software
Marco Bertoli (Astarte Strategies Srl)
- Author in Simulation-driven comparison and investment prioritization of gas-fired and electric radiant tubes in galvanizing furnaces.
Stefano Bertoni (ECOTRE Valente srl)
- Co-author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Susanne Bethlehem-Seidel (Aktien-Gesellschaft der Dillinger Hüttenwerke)
- Author in Upgrading of low-quality iron ores and mill scale with low carbon technologies
Dieter Bettinger (Primetals Technologies)
- Author in Reducing blast furnace CO2 emissions
- Author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
- Author in The Pathway to Autonomous Ironmaking
- Co-author in From Data to benefit - application of AI technologies in steel production
Andrew Betzold (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Simrat Bhutani (Hatch Ltd)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Tommaso Bianchi (SMS group)
- Co-author in Yield increase by hot strand coating in continuous casting of long product
Roland Bichler
- Co-author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
Rifat Bugra Bildiri (Institute of Biotechnology, Gebze Technical University, Kocaeli, Turkiye)
- Author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Andrea Biliotti (Danieli Centro Combustion S.p.A.)
- Author in Innovative “Scale Free” Furnace for section rolling mill
Felix Birkelbach
- Co-author in Estimating Reheating Time for Steelmaking Ladles Using Optimization-Based Machine Learning Approach Integrated with a Physical Thermal Model
Frederik Ryberg Biswas (Haldor Tospoe)
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Jiri Blazek (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Benjamin Böcker (HiScience GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Michael Bodley (Hatch Ltd.)
- Co-author in Slag Modelling and Design Optimisation for Enhanced Performance in Electric Smelting Furnaces
Franscesco Boenzi (Politecnico di Bari)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Elena-Briana Boeru (Sapotech Oy)
- Author in Metallurgical Quality Assessment Of Continuous Casting Combining AI, Sensor Information and Machine Vision
Jochen Bold (Mercedes-Benz AG)
- Co-author in On the influence of EAF based steelmaking on AHSS
Henk Bolt (Tata Steel, IJmuiden, Netherlands)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Francesca Bonfanti (MIMETE Srl)
- Author in A combined experimental–numerical approach to assess the effects of quenching transfer time on the microstructure and mechanical properties of a Ti-6Al-4V alloy
Emanuele Borasio (WEAR S.R.L)
- Author in Demonstration of XR experience via Hands-On Session
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Annika Borgenstam (KTH Royal Institute of Technology)
- Co-author in Effect of carbon content (0.61 to 0.99 wt.%) on bainite transformation kinetics, structure and tempering resistance in low alloy steel
Eduardo Borges Matos (University of Oulu)
- Author in Determining of iron oxide pellet porosity using image analysis
Jean Borlée (CRM Group)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Lukas Borrmann (SMS group)
- Author in Technology Consulting Meets Operational Excellence to Improve Steelplants Operations
Tommaso Bortolussi (SMS group)
- Co-author in SMS ZERO2Flame HY2 burner for reheating furnaces
Hélène BOUCARD (ArcelorMittal)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Paul Bouchard (National Research Council of Canada)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Valentine Bouteille (TRANSVALOR)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Teresa Annunziata Branca (Scuola Superiore Sant'Anna - TeCIP Institute - ICT-COISP)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Models for simulating gas and energy management in the transition of integrated steelworks to high hydrogen direct reduction-based processes
- Co-author in Slag changes in future steelmaking scenarios: simulation investigations
Jens Brandenburger (VDEH-Betriebsforschungsinstitut)
- Author in Demonstration of XR experience via Hands-On Session
- Author in DynReAct – An open-source production planning software
- Author in Fast and robust order-based scheduling to solve the Mid-Term planning problem
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
- Author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Michal Brazda (COMTES FHT a.s.)
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
Robin Breitbach
- Co-author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
Hubert Breukelman (Tata steel Nederland Technology)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Clara Brieke
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
Tobias Brink
- Co-author in Sustainable Carbon Solutions for CO2 Mitigation in the Metallurgical Industry
Philippe Brocard
- Co-author in EAF Waste Heat Recovery: Turning Industrial Waste into Sustainable Energy
Guillaume Brosse (SMS group)
- Co-author in The impact of DRI ratio and quality on EAF operational and metallurgical performances
Charles Brosseau (National Research Council of Canada)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Jack Brouwer (University of California, Irvine)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Aron Brümmer (TSR Resource GmbH & Co. KG)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Roberto Gerardo Bruna (Ternium Argentina)
- Co-author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
Philippe Brunier (Cogne Acciai Speciali)
- Author in A comparative CFD study on tundish flow with particle tracking
Christoph Brunnbauer (voestalpine Stahl)
- Author in Online Temperature and Deformation Measurement for Vessel Shell of Oxygen Steelmaking Converters
Jens Bublitz (EMG Automation GmbH)
- Author in Advanced Coating Thickness Measurement in Electrical Steel Manufacturing with EMG SOLID® DFT
Stefano Bucci (Università degli Studi di Torino)
- Author in Decarbonization of Steel: Challenges and Opportunities for Modern Steelmakers and Carmakers
Bernd Buchberger
- Author in INNOVATIVE APPROACH IN STEELMAKING REFRACTORY APPLICATIONS
Sharad Budhia
- Author in Green steel production through the Endless Bar Production process
Heinrich Buken (SMS group)
- Co-author in High Speed Billet Casting: Introduction of a new Billet CCM at Tosyalı Demir Çelik
Denijel Burzic (Primetals Technologies Austria)
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Heike Busch (Dillinger)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Felix Buscher (Klaus Kuhn Edelstahlgießerei GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Frank Busenkell (ThyssenKrupp Steel Europe AG)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Sara Busolini (Acciaierie Bertoli Safau)
- Author in Development of optimized continuous casting process for zero-defect round blooms production in high silicon 54SiCr6 automotive spring steel. Production trials in Acciaierie Bertoli Safau S.p.A.
Markus Bussmann (Department of Mechanical & Industrial Engineering at the University of Toronto)
- Author in An OpenFOAM Eulerian-Lagrangian Model of a Polydisperse Bubbly Flow in a Continuous Casting Mould
Scott Button (Danieli UK Holding Ltd.)
- Author in Upgrade a heavy section mill to produce high-strength beams with Danieli Thermo-Mechanical Control Process (TMCP)
GeunWoo Byun (Hanyang University)
- Author in Effect of Bottom-Blowing on Nitrogen Removal Kinetics in Electric Arc Furnace (EAF) Conditions
Bruno Cabeza (CRM Group)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Sébastien Caillat (Fives Stein)
- Co-author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
irene calliari (Univerity of Padova)
- Author in Optimization of Fe-Mn-Al-C low-density steels for forging application
Ian Cameron (Hatch)
- Co-author in Burden distribution modeling to diagnose blast furnace operations
- Co-author in Pathways for Sustainable Hot Metal Production from DRI to Support Green Steel Production
Stefano Campanari (Department of Energy, Politecnico di Milano)
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
Stefano Campanari (Politecnico di Milano)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Damiano Capobianco (RINA Consulting - CSM)
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
Adriano Capparelli (Arvedi Tubi Acciaio S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Riccardo Carli (Prosimet SpA)
- Co-author in BORON IN CASTING POWDER: INSIGHTS FROM PROSIMET STUDIES
Joel Carlsson
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Andrea Carmignani (SMS group)
- Co-author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
Daniele Carosi (Alma Mater Studiorum - Università di Bologna)
- Author in Effect of short-time annealing on recrystallization and texture evolution in an electrical steel
Francisco Carranza
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Jesse Carreau
- Author in Blast Furnace Hearth Relines From Concept to Construction
Carlo Cascino (SMS group)
- Author in High Speed Billet Casting: Introduction of a new Billet CCM at Tosyalı Demir Çelik
- Author in Innovative Continuous Minimill Technology (CMT®) for sustainable long product production
Mirco Casini (Project Group s.r.l.)
- Author in Optimization of Process Control and Energy Consumption in Hot Flat Ring Rolling Using Interactive Real-Time Software
Egidio Cassone
- Co-author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
Cristiano Castagnola (SMS group)
- Author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
- Co-author in Breaking boundaries: Tata Steel's H Blast Furnace sets new standards
Andrea Castelli (SMS group)
- Author in Decarbonization of industrial high-temperature processes with an innovative Electric Gas Heating
Etienne CASTIAUX (EBDS Engineering)
- Co-author in Arcelormittal Industeel slab caster conversion to ODS fibers with the Fiberstrand® technology.
Lorenza Catini (RINA Consulting - CSM S.p.A.)
- Author in Replacing natural gas with Hydrogen in heat treatment furnaces: impact on scale formation, surface quality and pickling kinetics of stainless steel
Alain Cauchie (Lhoist Western Europe)
- Co-author in Filter cake by-product from pickling line transformation into a valuable product to recover the metallcs for EAF steelmaking process.
Bernard Cauwenberghs (SMS group)
- Co-author in PCIXpert: boosting efficiency and resources utilization
Joelson Cavalcanti Andrade (Arcelormittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Pasquale Cavalier (University of Oulu)
- Co-author in Determining of iron oxide pellet porosity using image analysis
Pasquale Cavaliere (University of Oulu)
- Author in Hydrogen direct reduction of iron ores: effect of agglomeration
Nicole Cavlovich (Hatch Ltd)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Cosimo Cecere (SMS group)
- Co-author in Transforming Steel Manufacturing: Innovations and Achievements in Direct Casting and Rolling
Simone Cechet (Danieli & C. Officine Meccaniche S.p.A.)
- Author in A LOOK AT DANIELI DCM'S STRATEGIC PLANT UPGRADES ACROSS ITALY
Cláudio César da Costa (Arcelormittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Cláudio César da Costa (Arcelormittal Tubarão)
- Co-author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Lorella Ceschini (Alma Mater Studiorum - Università di Bologna)
- Co-author in Effect of short-time annealing on recrystallization and texture evolution in an electrical steel
Pietro Cetto (politecnico di milano)
- Author in Multi-alloy production via chips compaction and hot rolling
- Co-author in Development of Functional Graded Materials through Sintering of Layered Metal Powders
- Co-author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
Akhilesh Chandgude (VDEh-Betriebsforschungsinstitut BFI)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Dilip Chandrasekaran (Kanthal AB)
- Author in Electrification of heating in steelmaking – an enabler of fossil-free steel
Min Kwan Chang
- Author in Effect of Magnesium Deoxidation on Non-Metallic Inclusions in Austenitic Stainless Steel
Nicolas Charbonnier (Arcelormittal)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Andreas Chasiotis (AEIFOROS)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Jianrong Chen (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Zhao Ping Chen (Baoshan Iron & Steel Co., Ltd.)
- Author in Study on the Effect of Direct Reduced Iron on the Nitrogen Content in Electric Arc Furnace Steelmaking
Zhiping CHEN (Central Research Institute,Baosteel Iron & Steel CO.,LTD)
- Author in Bending Control With Cooling Bed Technology for Typical Alloy Cold Heading Steel Billet.
Guoguang Cheng (State Key Laboratory of Advanced Metallurgy, University of Science and Technolog)
- Co-author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
- Co-author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
SEUNGHWAN CHEON (Hyundai Steel R&D Center)
- Co-author in Development of High-Strength Dual Phase (DP) Steels with Enhanced Ductility
Michele Chiappa (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Optimizing Energy Media Consumption and Reducing Greenhouse Gas Emissions in Coil Coating Lines
David Chiaramonti (PolioTo)
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
Enzo Josef Chiarullo (Tenova SpA)
- Author in Dry granulation process and technology for LF slag treatment
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Matteo Chini (Ferriere Nord SPA)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
You Beom Cho (POSCO)
- Author in Improved Internal Quality of High-Grade Steel Plate Using PosHARP Technology
Wonjae Cho (Hyundai steel)
- Co-author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Sangwoo Choi (POSCO)
- Co-author in Investigations on hearth refractory and skull
Kyle Chomyn (Hatch Ltd.)
- Author in Electric Smelting Furnace Technology for Green Steelmaking
- Co-author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
- Co-author in Slag Modelling and Design Optimisation for Enhanced Performance in Electric Smelting Furnaces
Angelina Chugaeva (Acciaierie di Calvisano S.p.a. Feralpi Group - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Jeasook Chung (POSCO)
- Co-author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
Carlos Cicutti (Tenaris)
- Author in Optimization of scrap mix in EAF steelmaking
Simone Cicutto (Ergolines Lab s.r.l. - Trieste)
- Author in Ultrasonic steel level control: focus on performances and operability based on case study
Maicol Cimolino
- Author in A significant example of successful revamping of a wire rod line for the production of special steels
- Author in Unbeatable product properties and performance of Danieli's K-Spooler
F Cirilli (Rina Consulting Centro Sviluppo Materiali)
- Author in An integrated approach to steelmaking decarbonization: HYDRA project. Description of the innovative open platform and first results
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
- Author in Kinetics of Direct Reduction of iron ore pellets: understanding rate-limiting steps in hydrogen-based reduction of low- and high-grade pellets
- Author in Safe H-DRI: advancing the production, transport and storage of Hydrogen-based Direct Reduced Iron (H-DRI) for sustainable steelmaking
Thorsten Claff (SMS group)
- Author in Seamless Quality Management in the Transition to Energy-Efficient Steel Production
Nicolas Claveranne (Celsa Group)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Cyril Claveroulas (Fives Stein)
- Co-author in Continuous Annealing and Galvanizing Line electrification: decarbonation as a new opportunity to produce HSS and AHSS by flash annealing
Paolo Cobelli (SMS group)
- Co-author in On the application of FEMS and MSR technologies on the continuous casting of long products
Paolo Colbertaldo (Politecnico di Milano)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Paolo Colbertaldo (Department of Energy, Politecnico di Milano)
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
Valentina Colla (Scuola Superiore Sant'Anna)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
- Author in Application of Deep Learning technique to improve the scrap quality
- Author in DynReAct – An open-source production planning software
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
- Co-author in Models for simulating gas and energy management in the transition of integrated steelworks to high hydrogen direct reduction-based processes
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
- Co-author in Slag changes in future steelmaking scenarios: simulation investigations
Stefano Colosio (Franchini Acciai SpA)
- Co-author in Effect of Intermediate Intercritical Quenching on Low Temperature Toughness of Low-alloy Steel Forgings
Antonio Comelli (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Danieli Quali-HSM®: the next gen HSM process
Nicholas Comstock
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
alberto conejo (itm)
- Author in Slag foaming due to CO generated at the slag/metal interface
Alberto Conejo (USTB)
- Author in Slag foaming due to CO generated at the slag/metal interface
Riccardo Conte (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Green DUE: Fossil-free casting and rolling technology for high quality automotive exposed panels
Mike Cook (Quaker Houghton BV)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Maarten Coppens
- Co-author in 150 tons revert-based briquettes produced and processed in a blast furnace
Pedro Sampaio Cotta
- Co-author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
Corentin Coulais (University of Amsterdam)
- Co-author in Steel metamaterials for EV battery box protection
Giovanni Cozzi
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
Fabio Cravino (SMS group)
- Co-author in Decarbonization of industrial high-temperature processes with an innovative Electric Gas Heating
- Co-author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
Frederic Crimmann (Steeltec AG)
- Co-author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Alessandro Cristallini
- Co-author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
Jéssica Cristina Berto Lima (Arcelomittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Beatrice Crocco (ArcelorMittal Global R&D)
- Author in Bio-char production and usage for iron ore pelletization
Xavier Dacquet (Celsa Group)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Oday Daghagheleh (Primetals Technologies Linz GmbH)
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
Anna Dahlstedt (SSAB)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Weixing Dai (Huzhou Yongxing Special Stainless Steel Co., Ltd.)
- Co-author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
Massimiliano Daita (SMS group)
- Co-author in The impact of DRI ratio and quality on EAF operational and metallurgical performances
John D'Alessio (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Gianluca Dall'Osto (Politecnico di Milano)
- Author in Clean iron production by self-reducing agglomerates made in biochar and mill scale: a comparison in reduction efficiency as a function of biochar quality and properties
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
Francesco Dal Pont (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Technological solutions for pollutants abatement in Steel Meltshop fumes
Edoardo D'Amanzo (RINA Consulting - CSM)
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
Michael Dambitis
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
Marco Daneri (Danieli Centro Combustion S.p.A.)
- Author in DIGITAL TRASFORMATION IN REHEATING AND HEAT TREATMENT FURNACES: SHP
Pedro Paulo da Silva Cruz (K1-MET)
- Author in Machine learning model for mould powder consumption in continuous steel casting
Elena Da Val (Fassa Bortolo)
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
Anthony Deardo (University of Pittsburgh)
- Author in Advances in Steels for Stronger Body-in-White and Enhanced Safety
Nadine Decker (ArcelorMittal Eisenhüttenstadt)
- Author in Energy-efficient production based on a comprehensive scheduling including an optimized temperature guidance and heat pacing
Scott Dedrick (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Rüdiger Deike (Universität Duisburg-Essen)
- Co-author in Investigation of the smelting and carburization behavior of DRI-Pellets under an inert atmosphere using various carburization agents.
Ryne Deitz (Steel Dynamics)
- Co-author in Improvement of Breakout Prevention for startup stability enhancement in high productivity thin slab casters
Borja De La Pena (2ArcelorMittal Basque Country Research Centre AIE)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Clara Delgado (Fundacion Azterlan)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Pietro Della Putta (SMS group)
- Co-author in SMS ZERO2Flame HY2 burner for reheating furnaces
Alessandro Dell'Uomo
- Author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
Andrea De Luca (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Latest developments in MIDA technology
Jérôme De Matteis (SMS group)
- Author in Hot DRI Material Gate – A smart product for green steelmaking in a digitalized future
Pascal De Micheli (TRANSVALOR)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Fatima Demirci (Hüttenwerke Krupp Mannesmann GmbH)
- Co-author in Monitoring of blast furnace wall pressure profiles and their relation to process efficiency
Vinícius de Morais Oliveira (Vale S.A.)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
- Author in Sodium silicate impacts on blast furnace operation.
Christian Dengler (SMS group)
- Author in Optical Measurement of raw material particle size
Joyce den Hollander
- Author in 150 tons revert-based briquettes produced and processed in a blast furnace
Joachim Denker (ASINCO GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
- Co-author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Michele De Santis (Rina Consulting - Centro Sviluppo Materiali SpA)
- Author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
- Author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
- Co-author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
Francesco De Santis (Danieli Centro Combustion S.p.A.)
- Author in Low-emission, multiline, quality bar quenching and tempering lines: Danieli Olivotto Ferré multiline solution maximizes production capacity and final product quality
Thomas Dettinger (Mercedes-Benz AG)
- Co-author in On the influence of EAF based steelmaking on AHSS
Stefano Dettori (Scuola Superiore Sant'Anna)
- Author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
Alessandro De Vecchi (FERALPI SIDERURGICA)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Alessandro De Vecchi (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Tony De Vriendt (ArcelorMittal Belgium NV)
- Co-author in Smart controlled actuator to homogenize the temperature of the transfer bar
Jan De Weerdt (Danieli Corus)
- Co-author in Dry Blast Furnace Gas Cleaning: Technology and Operational Experiences
Jan De Weerdt (Danieli Corus)
- Co-author in Blast Furnace CO2 Emissions: A Techno-Economic Assessment
Thomas De Witte (ArcelorMittal Belgium)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Frédéric D'Hautcourt (ARCELORMITTAL INDUSTEEL)
- Author in Arcelormittal Industeel slab caster conversion to ODS fibers with the Fiberstrand® technology.
Matteo Diani
- Author in EAF Waste Heat Recovery: Turning Industrial Waste into Sustainable Energy
- Author in Green Hydrogen in Cogne
Jose Diaz Álvarez (ArcelorMittal)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
Juan Ramón Díaz Bodes (ArcelorMittal Investigación e Innovación)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Marta Di Bianca (CONSORZIO PER LA RICERCA E LA DIMOSTRAZIONE SULLE ENERGIE (Re-Cord))
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Cosmo Di Cecca (Feralpi Siderurgica)
- Author in Modular hybrid technology in the steel plant production
Cosmo Di Cecca (Feralpi)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Cosmo Di Cecca (Feralpi)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Cosmo Di Cecca (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Gianluca Di Egidio (Università di Bologna)
- Author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Uxia Dieguez Salgado
- Author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
Uwe Diekmann (Matplus GmbH)
- Author in Digitalization of Material Properties Across the Entire Process Chain
- Author in Integrating CO₂ Reporting with Physically Consistent Material and Energy Flow Analysis to Improve Circularity of Steel Products
Jonas Dietzig
- Author in Circored as a Pre-Reduction Step for Low-Grade Iron Ores
Amedeo Di Giovanni (DREVER International)
- Co-author in Advancements and future prospects of zero emission galvanizing technologies
Vinicio Di Iorio (Sant'Anna School of Advanced Studies)
- Author in Navigating the Automation-Augmentation Paradox: Insights from AI Implementation in a Labor-Intensive Foundry
Manfred Dingenotto (SMS group)
- Co-author in Heavy plate applications ensure energy transition – Modern plant concepts for forward looking plate production
Sangameswaran Dipak (SMS group)
- Author in Breaking boundaries: Tata Steel's H Blast Furnace sets new standards
Orlando Di Pietro (RINA Consulting - CSM)
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Giacomo Disarò (profilglass)
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
Andrea Di Schino (University of Perugia)
- Author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Andreas Dissauer (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Electromechanical servo drive for mold level control: performance and evolution
Philipp Döhr (Theo Steil GmbH)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Josef Domitner (Graz University of Technology; Institute of Materials Science, Joining and Forming)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Laurent Dorel (CLECIM SAS)
- Author in Demonstration of XR experience via Hands-On Session
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Bárbara Dornelas (CRM group)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Camille Douce
- Author in Advanced Dolime Injection Techniques for Enhanced EAF Steelmaking: Insights from a New Collaborative Trial by Lhoist and IntecoPTI
Rocco Dragonetti
- Co-author in Revolutionizing Triple Slitting Technology for Rebar 16mm in the rolling and groove process design: QATAR Steel & POMINI Long Rolling Mills technologies
Alexander Drüen (SMS group)
- Author in Conseal for slabs: Patented solution for optimizing start of cast
Lin Du (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Michal Duchek (Czech)
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
Alexis Duchene (Fives DMS)
- Author in Cutting-Edge Technologies To Produce Electrical Steel
Josef Duliškovič (Research and Testing Institute Pilsen)
- Co-author in Hydrogen Embrittlement in Pipeline and Cast Steels for Gas Transport Infrastructure
Shawn Durand (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Marco Durando (SMS group)
- Co-author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
Vincenzo Duro (Acciaierie di Calvisano)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Flavio Dutra (Vale S.A.)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Johannes Ebert (Spherity GmbH)
- Co-author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Thomas Echterhof
- Co-author in Experimental evaluation of a flexible natural gas and hydrogen burner in the electric arc furnace
Tommie Edeblom (Höganäs AB)
- Co-author in Improved EMLI Technology for Early Slag Detection and Enhanced Steel Yield and Quality
Ross Edmond (Primetals Technologies Ltd)
- Co-author in Hydrogen Pulse Injection into the Blast Furnace Shaft
Mohamed Efetuerk
- Co-author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
Martin Egger (voestalpine Stahl)
- Author in Online Temperature and Deformation Measurement for Vessel Shell of Oxygen Steelmaking Converters
Nora Egido Perez (Sidenor I+D)
- Author in Replacement of Conventional Gas Burners with Electrical Resistive Heating for Tundish processes: A Sustainable Approach within the CITADEL Project
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Christoph Eglsäer
- Co-author in The interplay of SEN design and flow dynamics in thin and mid slab casting
David Egner (SARCLAD)
- Author in ON-LINE STEEL SURFACE CONTAMINATION MONITORING WITH LIBS-BASED SENSOR
Reinhard Ehrengruber
- Co-author in The interplay of SEN design and flow dynamics in thin and mid slab casting
Thomas Eichert (SMS group)
- Co-author in Advanced fluid flow simulation for the RH process
Jan Eisbacher-Lubensky
- Author in Comparative Analysis of CO and H2 Reduction Mechanisms in Electric Arc Furnace Dust
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
Jan Eisbacher-Lubensky
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Ciaran Eising (University of Limerick)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Anders Ekerot (Hybrit Development AB)
- Co-author in Development of Digital Tools at HYBRIT's Pilot Plant for H2 Direct Reduction
Cynthia ELHAJJ
- Author in Optimization of Stainless Steel Cold Rolling Lubrication Through Thermal Modeling
Bilal Elhajjar (United Steel Industrial Co.)
- Author in On the benefits of switching from lime to dololime fines injection in electric arc furnace
Yan Elksnis (Hatch Ltd)
- Author in Next Generation Power Supply Options for Electric Arc Furnaces and Electric Smelting Furnaces
Uwe Elzenbaumer (SMS group)
- Co-author in Superior product change control at cold rolling mills for enhanced productivity
MARCUS EMRICH (VALE SA)
- Author in Sodium silicate impacts on blast furnace operation.
Edo Engel (Danieli Corus BV)
- Author in Flexible pathways for green iron production
- Co-author in Blast Furnace CO2 Emissions: A Techno-Economic Assessment
- Co-author in Dry Blast Furnace Gas Cleaning: Technology and Operational Experiences
- Co-author in FerSol, the new three-in-one water treatment chemical
- Co-author in Online Temperature and Deformation Measurement for Vessel Shell of Oxygen Steelmaking Converters
Bernard Ennis (Tata Steel Netherlands Technology bv)
- Author in Steel metamaterials for EV battery box protection
Sascha Eppensteiner (EBNER Industrieofenbau GmbH)
- Co-author in Next generation of sustainable HICON/H2® bell-type furnace systems
Esra Erdem Hornauer (SMS group)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
Jan-Erik Eriksson (Proximion)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Jan Erik Eriksson (Proximion AB)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Gunnar Eriksson (Alleima)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Mikael Ersson (KTH)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
dogan ertas
- Author in NEW GENERATION IN PRE-HEATING TECHNOLOGY FOR ELECTRIC STEEL MAKING HIGHER PRODUCTIVITY WITH REDUCED POWER
Domenico Esposito
- Co-author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
Nicholas Esquisito (Cogne Acciai Speciali)
- Author in Development and application of measurement systems in forging process
Francesco Fabris (Danieli Automation S.p.A.)
- Author in Smart Automation for Efficient Water Management in Steelmaking: The Q-WATER System
Timo Fabritius
- Author in Hydrogen direct reduction of iron ores: effect of agglomeration
- Co-author in Determining of iron oxide pellet porosity using image analysis
Timo Fabritius
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Jimmy Fabro (SMS group)
- Co-author in SMS ZERO2Flame HY2 burner for reheating furnaces
Kim Fagerlund
- Author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Laurent fahrner
- Author in Direct Feed Power Supply to enhance power quality and EAF KPI
Joel Falk (Swerim AB)
- Co-author in Finite Element modelling of skid marks on steel slabs in a walking beam reheating furnace
Daniel Falkowski (ArcelorMittal)
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Ulrike Faltings (SHS - Stahl-Holding-Saar GmbH)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
EROS LUCIANO FARACI (RINA-CSM)
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Manuel Farkas (K1-MET GmbH)
- Co-author in Advancing hydrogen plasma smelting reduction: Experimental insights from a demonstration plant
Amir Farmanesh (UPM)
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Franz Fehse
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Christoph Feilmayr (voestalpine Stahl Linz)
- Co-author in A blast furnace tapping simulator to better understand dead man flotation scenarios
Christoph Feilmayr
- Co-author in AI-Powered Cohesive Zone Optimization: Enhancing Efficiency and Stability in Blast Furnaces
Wolfgang Fellner
- Co-author in The interplay of SEN design and flow dynamics in thin and mid slab casting
Jan Ferino (Astarte Strategies Srl)
- Author in Simulation-driven comparison and investment prioritization of gas-fired and electric radiant tubes in galvanizing furnaces.
Mériane Fernandes
- Author in Thermal simulation of WAAM process to support production
Guillermo Fernandez (AMI)
- Author in SmartKnB: Artificial Intelligence tools for EAF Optimization
Xavier fernandez (Marichal Ketin)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
Diego Fernández Fernández (ArcelorMittal)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
Ivan Fernandez Suarez
- Co-author in Modularization strategy for the construction of Direct Reduction Plants
alessandro ferraiuolo (Marcegaglia Ravenna)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
- Author in Modular hybrid technology in the steel plant production
- Author in Novel production route of fully processed high-Si NGO steels for e-mobility at Marcegaglia Ravenna plant
- Author in Simulation-driven comparison and investment prioritization of gas-fired and electric radiant tubes in galvanizing furnaces.
- Co-author in Effect of short-time annealing on recrystallization and texture evolution in an electrical steel
- Co-author in Real-Time Work Hardening Evaluation for Optimizing Hot Rolling Schedules and Power Demand in HSLA Steel Production
Lorenzo Ferraiuolo (Trieste University)
- Author in Real-Time Work Hardening Evaluation for Optimizing Hot Rolling Schedules and Power Demand in HSLA Steel Production
Angelo Ferranti (Contec Industry srl)
- Author in REUSE OF RECOVERY THERMAL ENERGY FOR WATER TREATMENT IN STEEL INDUSTRY
MARIO FERRARO
- Author in Advancing Sustainability in Continuous Casting of Steel Strategies for Productivity, Traceability, and Waste Reduction
Sergio Pablo Ferro
- Author in Optimization of scrap mix in EAF steelmaking
Alberto Feruglio (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Waste Heat Recovery systems for EAF primary fumes
Marco Ficili (Department of Energy, Politecnico di Milano)
- Author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
Marco Ficili (Politecnico di Milano)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Martin Fieweger (AMEPA GmbH)
- Author in Oiling of Steel Strip: A New, Intelligent Oiling Machine Combines Electrostatic Oiling With High-Precision Oil Film Measurement, Ensuring Higher Process Security and Lower Oil Consumption
- Author in Safe Tundish Drain with Residual Steel Detection (RSD) for Maximized Yield and Process Optimization
Wim Filemon (Quaker Houghton BV)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Aldo Fiorini (Marcegaglia)
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
Felix Firsbach (Badische Stahl-Engineering)
- Author in Secondary metallurgy challenges in the transformation from oxygen to electric steelmaking
Lothar Fischer (SMS group)
- Co-author in Thick Slab Casting Technology for renewable energy produced by windmills
Paul Fischer
- Author in Optimized Control of an EAF off-gas system by Video Analysis
Karl-Heinz Fischer (SMS group)
- Co-author in Energy- and Space-Saving Electrolytic Cleaning with SMS group Pulse Nozzle Technology
Richard Fischereder (Primetals)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Sebastien Flament (CRM)
- Author in High Turbulence Pickling
- Author in Investigation on the use of organic acids to pickle the oxide scale of carbon steel hot rolled strips
Alexander Fleischanderl
- Author in The Steel Industry – Setting the Standard for the Twin Transition
Gianpaolo Foglio (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Gianpaolo Foglio (FERALPI SIDERURGICA)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Alfredo Formisano (ICONSULTING SPA)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Marcellino Fornasier (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Smart Automation for Efficient Water Management in Steelmaking: The Q-WATER System
Alessandro Fortunato (Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Davide Fossati (SMS group)
- Co-author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
Hubert Fouarge (CRM group)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Laurent FRAIKIN (CRM Group)
- Author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Federico Franco (Danieli & C. Officine Meccaniche S.p.A.)
- Co-author in Work Roll Cooling Optimization
Giacomo Franzil (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Danieli Quali-HSM®: the next gen HSM process
Klaus Frauenhuber
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Francesco Fredi (Feralpi)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
salvatore frediani
- Author in Green Hydrogen in Cogne
Michael Freiler
- Co-author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
Jacob Brinch Frennegaard (Haldor Tospoe)
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Marco Frey (Sant’Anna School of Advanced Studies, Institute of Management, SUM (Sustainability Management) Lab, Piazza Martiri della Libertà 24, Pisa, Italy)
- Co-author in How can Life Cycle Assessment support the definition of decarbonization strategies: lessons learnt from the GreenHeatEAF project
Jana Friese
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
Harald Fritschek
- Author in Reducing blast furnace CO2 emissions
- Co-author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
- Co-author in The Pathway to Autonomous Ironmaking
Piero Frittella (Feralpi Siderurgica)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
- Author in Modular hybrid technology in the steel plant production
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Jenny Fritz (SSAB)
- Co-author in Laser ultrasonics for microstructure verification of heat treatments and thermal processes (LUMHEAT)
Krister Fröjdh (Proximion)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Krister Fröjdh (Proximion AB)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Wolfgang Fuchs (SMS group)
- Co-author in Heavy plate applications ensure energy transition – Modern plant concepts for forward looking plate production
- Co-author in The art of keeping up with latest hot strip mill technology – upgrade success stories
Takuya Fujisawa
- Author in Construction of heat treatment analysis model considering transformation plasticity and accuracy verification
Johannes Gabl
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
Josef Gahleitner
- Author in Green steel production through the Endless Bar Production process
Luca Gaia (ICONSULTING SPA)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Quentin Gaiga (ArcelorMittal Maizières Research)
- Co-author in Bio-char production and usage for iron ore pelletization
René Gaiola (SMS group)
- Co-author in Ecologic and Economic Evaluation of COG Injection and Comparison with other Fuel Gas Injection Systems
- Co-author in PCIXpert: boosting efficiency and resources utilization
Georg Gaiser (Chair of Ferrous Metallurgy, Montanuniversitaet Leoben)
- Author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
- Co-author in High temperature oxidation in steel processing under different process conditions, atmospheres and rising levels on tramp elements
- Co-author in Influence of the cooling strategy on the intergranular crack formation during continuous casting of TRIP steels produced from low-grade scrap
Paolo Galbiati (Tenaris)
- Author in Optimization of scrap mix in EAF steelmaking
Douglas Galesi (Shinagawa Refratários do Brasil)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Michael Gallwitz
- Author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
David Garcia (Fundacion Azterlan)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Nicolás García (EVIDEN)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Jose Luis GARCIA CIMADEVILLA (ArcelorMittal)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Juan Garcia Jimenez
- Author in Modularization strategy for the construction of Direct Reduction Plants
Pritesh Garg (Luleå University of Technology)
- Author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Pierre-Louis Garmier
- Author in Direct Feed Power Supply to enhance power quality and EAF KPI
Damien Garot (CRM Group)
- Author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Daniele Gaspardo (Ferriere Nord SPA)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Sa Ge (Hatch Ltd.)
- Co-author in Electric Smelting Furnace Technology for Green Steelmaking
- Co-author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
- Co-author in Pathways for Sustainable Hot Metal Production from DRI to Support Green Steel Production
Stephan Geimer (thyssenkrupp Steel Europe AG)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
Marcello Gelfi (Università degli studi di Brescia - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Jens Gellert (ArcelorMittal Eisenhüttenstadt)
- Author in Energy-efficient production based on a comprehensive scheduling including an optimized temperature guidance and heat pacing
Elena Geminiani (ICONSULTING)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Timo Gemmer (EMG Automation GmbH)
- Co-author in Advanced Coating Thickness Measurement in Electrical Steel Manufacturing with EMG SOLID® DFT
Martin Gemvik
- Co-author in Sustainable Carbon Solutions for CO2 Mitigation in the Metallurgical Industry
Marvin Gennesson
- Co-author in Estimating Reheating Time for Steelmaking Ladles Using Optimization-Based Machine Learning Approach Integrated with a Physical Thermal Model
Cédric Georges (CRM Group)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Hamid Ghorbani (Hatch)
- Co-author in Campaign Life Extension of Hot Stoves in Blast Furnace Ironmaking
Partha S. Ghose (Kalyani Steels Limited)
- Co-author in The new MSR bloom caster at Saarloha Advance Materials, Pune
Carlo Giallombardo (Schneider Electric)
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
Gustavo Gilberti (Hatch Ltd.)
- Co-author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
Matteo Gili (RINA-CSM)
- Author in Modular hybrid technology in the steel plant production
MATTEO GILI (RINA-CSM)
- Author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Pietro Gimondo (Rina Consulting Centro Sviluppo Materiali)
- Author in An integrated approach to steelmaking decarbonization: HYDRA project. Description of the innovative open platform and first results
Valeria Giordano (Rina Consulting Centro Sviluppo Materiali)
- Author in An integrated approach to steelmaking decarbonization: HYDRA project. Description of the innovative open platform and first results
Björn Glaser (KTH Royal Institute of Technology)
- Author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
- Author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
- Author in Replacement of Conventional Gas Burners with Electrical Resistive Heating for Tundish processes: A Sustainable Approach within the CITADEL Project
- Co-author in Comparison of direct reduction by CO gas and carbonaceous materials
Julian Glechner
- Author in Optimized Control of an EAF off-gas system by Video Analysis
Alexander Gohr (SMS group)
- Co-author in Advanced Ring Rolling Simulations with Embedded Machine Control Systems
Alexandre Gonçalves Andrade (Metal7 Inc.)
- Author in Improving Direct Reduction Operation efficiency through Roller Screen technology
Catalina Gonzalez (Hatch)
- Co-author in Pathways for Sustainable Hot Metal Production from DRI to Support Green Steel Production
Alberto González Cuetos (ArcelorMittal Investigación e Innovación)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Luca Gori (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Enhancing rail performances: the Danieli RH2 - Rail Head Hardening process
- Author in Upgrade a heavy section mill to produce high-strength beams with Danieli Thermo-Mechanical Control Process (TMCP)
Nelli Gorin (Central Facility for Electron Microscopy, RWTH Aachen)
- Co-author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Henry Görtz (SMS group)
- Co-author in Energy- and Space-Saving Electrolytic Cleaning with SMS group Pulse Nozzle Technology
Elia Gosparini
- Author in Blast Furnaces CO2 mitigation: Ekofor technology (E.S.C.H. gmbh) for BLUAIR injection (Secondary Raw Material - recycled polymers)
Thomas Gossuin (CRM Group)
- Author in ON-LINE STEEL SURFACE CONTAMINATION MONITORING WITH LIBS-BASED SENSOR
Arianna Gotti (Trasnvalor SA)
- Author in Finite Element Thermo-Mechanical Modeling of Continuous Casting: Simultaneous In-Mould Solidification and Mould Condition Analysis for High-Speed Billet Casting with Danieli’s Power Mould™
Joshua Graham (Steel Dynamics)
- Co-author in Improvement of Breakout Prevention for startup stability enhancement in high productivity thin slab casters
Adam Grajcar (Silesian University of Technology)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
Alexander Gramlich (Steel Institute, RWTH Aachen)
- Co-author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Alexander Gramlich (RWTH Aachen University)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
Reine Granström (Hybrit Development AB)
- Co-author in Development of Digital Tools at HYBRIT's Pilot Plant for H2 Direct Reduction
Derek Gray (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Yann Graz (ArcelorMittal research)
- Author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Jacopo Greguoldo
- Co-author in Experimental evaluation of a flexible natural gas and hydrogen burner in the electric arc furnace
DUSTIN GREINER (BECHEM Lubrication Technology)
- Co-author in SMART Grease selection for Roller Bearings of Continuous Casters and Rolling Mills to reduce maintenance cost and extend bearing life.
Stefan Griesser (qoncept technology GmbH)
- Author in Melt Shop Production Management with Comprehensive Raw Material Optimization
Sébastien Grosjean (ArcelorMittal Maizières Research SA)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
Georg Gruber
- Author in Influence of Hydrogen-DRI on the EAF process
Christine Gruber (K1-MET)
- Author in The use of image data in steelmaking – a short guide to promises and pitfalls
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Nathalie Gruber (Montanuniversitaet Leoben - Chair of Ceramics)
- Author in Concepts for the development of carbon free mold powders for the continuous casting of steels
Christine Gruber
- Co-author in Advancing Hydrogen Plasma Smelting Reduction: Process Simulation and technical and environmental assessment
- Co-author in AI-Powered Cohesive Zone Optimization: Enhancing Efficiency and Stability in Blast Furnaces
Andreas Gruhl (FERALPI ESF)
- Author in Modular hybrid technology in the steel plant production
Anthony Nicholas Grundy (Thermo-Calc AB)
- Author in CALPHAD-based Thermodynamic and Kinetic Simulation of Secondary Steelmaking with Focus on Inclusion Formation and Modification
andrea gruttadauria (politecnico di milano)
- Author in Development of Functional Graded Materials through Sintering of Layered Metal Powders
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
- Co-author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
- Co-author in Multi-alloy production via chips compaction and hot rolling
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
André Gruvira Fernandes Carlos
- Co-author in Comparative mineralogical characteristics of different Iron Ores
Claudio Guarnaschelli (Rina Consulting - Centro Sviluppo Materiali S.p.A.)
- Author in Modular hybrid technology in the steel plant production
Sara Guazzi (Department of Energy, Politecnico di Milano, via Lambruschini 4, 20156 Milan, Italy)
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
François Guerin (Rolanfer Recyclage)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Francesco Guerra (Acciaierie di Calvisano S.p.a. Feralpi Group - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Felipe GUERRERO (JGI-HYDROMETAL)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Anna Guk (TUBAF)
- Author in Modular hybrid technology in the steel plant production
Oguz Gulbay (RWTH Aachen University)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
SHUO GUO (Yanshan University)
- Author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
Pramod Gupta (Tata Steel Nederland R&D)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Baldo Gurreri
- Author in Alternative Annealing Process for NGO Electrical Steels Using Hydrogen Combustion: A Comparative Study
- Author in Replacing natural gas with Hydrogen in heat treatment furnaces: impact on scale formation, surface quality and pickling kinetics of stainless steel
Teresa Gutierrez (Tecnalia)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Miguel Gutiérrez (Universidad Politécnica de Madrid | UPM)
- Author in DynReAct – An open-source production planning software
- Author in Exploring capabilities of an auction-based multiagent system in real-time reactive scheduling
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Heiner Gutte (TUBAF)
- Author in Modular hybrid technology in the steel plant production
Murat Guven (Politecnico di Milano)
- Co-author in Laser Cutting of Key Metals in the Construction Industry
Marta Guzzon (Tenova SpA)
- Author in Dry granulation process and technology for LF slag treatment
- Co-author in Slag changes in future steelmaking scenarios: simulation investigations
Rutger Gyllenram (Kobolde & Partners AB)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Michel Haag (SMS group)
- Author in Ecologic and Economic Evaluation of COG Injection and Comparison with other Fuel Gas Injection Systems
Gernot Hackl (RHI Magnesita GmbH)
- Author in The interplay of SEN design and flow dynamics in thin and mid slab casting
Michael Haentjes (SMS group)
- Co-author in Energy- and Space-Saving Electrolytic Cleaning with SMS group Pulse Nozzle Technology
Joachim Hafer (SMS group)
- Co-author in New insights from the online LUS grain size measurements
Hans Hage
- Co-author in 150 tons revert-based briquettes produced and processed in a blast furnace
Susanne Hahn (Primetals Technologies Austria)
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Susanne Hahn (Primetals Technologies Austria)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Carl Haikarainen (Åbo Akademi University)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Timo Haimi (Mr.)
- Author in Experiences and lessons learned from Metso’s Outotec pilot DRI smelting tests
Achinta Haldar (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Rachel Hale (School of Social Sciences, Cardiff University)
- Co-author in Navigating the Automation-Augmentation Paradox: Insights from AI Implementation in a Labor-Intensive Foundry
Kristýna Halmešová (COMTES FHT a.s.)
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
Joseph Hamuyuni
- Co-author in Experiences and lessons learned from Metso’s Outotec pilot DRI smelting tests
Hak Soo Han (Hyundai Steel Company)
- Co-author in A Study on enhancing accuracy of AI-based RDT automatic control in hot rolling process
Hak Soo Han
- Co-author in A Study on reducing the dispersion of the mechanical properties of hot coils through the dynamic adjustment of the coiling temperature
Karin Hansson (Alleima)
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Harald Harmuth (Montanuniversitaet Leoben)
- Co-author in Concepts for the development of carbon free mold powders for the continuous casting of steels
Kai Harreuter (TSR Resource GmbH & Co. KG)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Thomas Haschke (SMS group)
- Co-author in New insights from the online LUS grain size measurements
Khaled Hashimi (SMS group)
- Co-author in Advanced Load Sharing Control for Roller Straightening of Long Products
Yoshinari Hashimoto (JFE Steel Corporation)
- Author in Automation on thermal control of blast furnace
- Author in Practical Sintering Guidance System: Integrating Data-Driven and Transient Models
Gerald Leonidas Haslinger (Voestalpine BÖHLER)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Hamideh Hassanpour (postdoc)
- Author in Advancing Hydrogen Plasma Smelting Reduction: Process Simulation and technical and environmental assessment
Christoph Hassel (SMS group)
- Co-author in New insights from the online LUS grain size measurements
Thorsten Hauck (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Important aspects to optimise hydrogen enrichment in direct reduction
- Co-author in Hydrogen Pulse Injection into the Blast Furnace Shaft
- Co-author in Monitoring of blast furnace wall pressure profiles and their relation to process efficiency
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Gian Hauenstein (SMS group)
- Author in Energy recovery in long product casting
- Author in Yield increase by hot strand coating in continuous casting of long product
Heiko Haupt (Steeltec AG)
- Co-author in Boron alloyed free cutting steel: a new candidate for Pb steel substitution
Sebastian Hausmann (SMS group)
- Co-author in Advanced Load Sharing Control for Roller Straightening of Long Products
Hideyuki Hayashizaki (Process Research Laboratories, Nippon Steel Corporation)
- Co-author in Control of Low Bulk Density Region around Briquette in Briquette Blending Carbonization Process
Michael Hecht (Dillinger)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Peter Hedström (KTH Royal Institute of Technology)
- Co-author in Effect of carbon content (0.61 to 0.99 wt.%) on bainite transformation kinetics, structure and tempering resistance in low alloy steel
Ali Hegazy
- Author in Influence of Hydrogen-DRI on the EAF process
Sebastian Heibel (Mercedes-Benz AG)
- Co-author in On the influence of EAF based steelmaking on AHSS
Willem Heijne (Danieli Corus)
- Co-author in Online Temperature and Deformation Measurement for Vessel Shell of Oxygen Steelmaking Converters
Eetu-Pekka Heikkinen
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Leon Heinl
- Author in Influence of Hydrogen-DRI on the EAF process
Tim Oliver Heinz (SMS group)
- Author in Integrating Centerline and Wedge Control: A Comprehensive Approach to Enhancing Strip Stability, Precision, and Product Quality
Mikko Helle (Åbo Akademi University)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Christian Helmholz
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
Geoffrey Henriot (AM Belval)
- Co-author in Mould design optimisation for beam blank production
Michael Hensmann (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
Vilker Herdegen
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Jon Hermosa (Sidenor Aceros Especiales)
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
Gregor Herz
- Co-author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
Kurt Herzog
- Author in From Data to benefit - application of AI technologies in steel production
- Author in FROM DATA TO DECISION: UNIFYING PRODUCTION MANAGEMENT AND TPQC FOR OPTIMIZED STEEL PRODUCTION
- Author in The Pathway to Autonomous Ironmaking
Deivison Hespanhol (Shinagawa Refratários do Brasil)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Bernhard Hiebl (Primetals Technologies)
- Co-author in Smelter technology to close the raw material gap in green steel production routes
Ryota Higashi (Tohoku University)
- Co-author in Production conditions of porous iron whisker for the gas reforming in CRIP-D ironmaking process
Kenichi Higuchi
- Co-author in Development of Degradation Model for Sinter Ore Considering Particle Size Distribution
Felix Hinterreiter (Primetals)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
John Hinton (Primetals Technologies Ltd)
- Co-author in The application of bar cooling technology to plate mills for throughput and utilization improvements
Milan Hnizdil (Brno University of Technology, Heat transfer and fluid flow laboratory, Faculty of Mechanical Engineering)
- Author in Work Roll Cooling Optimization
Matthias Hoeck
- Co-author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
René Hofmann
- Co-author in Estimating Reheating Time for Steelmaking Ladles Using Optimization-Based Machine Learning Approach Integrated with a Physical Thermal Model
Gerald Hohenbichler
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Gerald Hohenbichler
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Florian Hollensteiner
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Florian Hollensteiner
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Matthias Hölscher (MINKON)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Harlad Holzgruber (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Mould design optimisation for beam blank production
Harlad Holzgruber (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Enhancing the Quality of Continuously Cast Products: Optimized Caster Design and Process Tuning for High-Quality Blooms
Harlad Holzgruber (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Electromechanical servo drive for mold level control: performance and evolution
Tom Honeyands
- Co-author in Impact of iron source and binder type on the mechanical strength and microtexture of ferro-coke
Michael Hönig (SMS group)
- Co-author in X-Pact® Solid Control – process optimization, quality control and root cause analysis in case of abnormalities in the cast product
Dietmar Hoppe (SMS group)
- Author in New insights from the online LUS grain size measurements
Andreas Horn (Stahlwerk Thüringen)
- Co-author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
Ian Houldworth
- Co-author in Filter cake by-product from pickling line transformation into a valuable product to recover the metallcs for EAF steelmaking process.
David Hradil (COMTES FHT a.s.)
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
Fengyang Hu (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Yi Huang (University of Science and Technology Beijing)
- Author in The Effect of Crystallization Temperature on the Properties of Silicon Manganese Slag Cast Stone
Marcel Huber (Syncraft GmbH)
- Author in How Biochar Drives the Transition to Sustainable Steel Production
Jean-Christophe Huber (ArcelorMittal Maizières Research)
- Author in Additional scrap melting capacity with dual-flow post-combustion lance at ArcelorMittal Dunkerque
Martin Hubrich (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Ensured fresh water supply by waste and process water treatment
- Author in Upgrading of low-quality iron ores and mill scale with low carbon technologies
Christopher Hulme-Smith (KTH Royal Institute of Technology)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Marianne Huot (ArcelorMittal Exploitation minière Canada s.e.n.c.)
- Co-author in Bio-char production and usage for iron ore pelletization
Thomas Hüper (SMS group)
- Co-author in Technology Consulting Meets Operational Excellence to Improve Steelplants Operations
Seung Min Hur (Hyundai Steel Company)
- Co-author in A Study on enhancing accuracy of AI-based RDT automatic control in hot rolling process
Seung Min Hur
- Co-author in A Study on reducing the dispersion of the mechanical properties of hot coils through the dynamic adjustment of the coiling temperature
Joar Huss (SSAB AB)
- Co-author in A Sustainable EAF Slag Practice Based on HYBRIT Laboratory Studies
Aurore Husson (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Barry Hyde (Hatch)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Gunilla Hyllander
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
MASSIMO IACUZZI
- Author in Pneumatic injection of carbon neutral sources in the EAF melting process: a comprehensive overview of the use of new materials
Raffaello Pio Iavagnilio (Politecnico di Bari)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Jose Maria Ibabe
- Author in Optimisation of CSP hot rolled structured steels based on Nb micro-alloying to reduce costs and GWP
Yasmine Iciriddir (SMS group)
- Author in PCIXpert: boosting efficiency and resources utilization
Andreas Igelbüscher
- Co-author in New, future ready production network for non grain oriented electrical steel
Keisuke Iijima (Sekisui Chemical Co., Ltd,)
- Co-author in Innovative CO2 to CO Conversion Technology for Carbon Neutrality with High Reaction Yield and Economic Efficiency
Sergiu Ilie
- Co-author in Continuous Casting Mold Flow with Original and Used Nozzle Geometries: Numerical Flow Simulations and Water Model Measurements
Sergiu Ilie (voestalpine Stahl GmbH)
- Co-author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
- Co-author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
- Co-author in Influence of different C, Ti, B, Mn, and Al content on hot ductility behavior of two micro-alloyed steel at different strain rates
- Co-author in Machine learning model for mould powder consumption in continuous steel casting
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Enric Illana (Ruhr-Universität Bochum, Lehrstuhl für Energieanlagen und Energieprozesstechnik)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Fabio Iraldo (Sant'Anna School of Advanced Studies)
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
Shingo Ishihara (New Industry Creation Hatchery Center, Tohoku University, Japan)
- Co-author in Effect of gas volume expansion on carbothermic reaction of phosphoric acid to produce white phosphorus
Oguz Isik (MATIL Co.)
- Co-author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Anton Ivanov (PSI Software SE)
- Author in HyMAS: A Hybrid Multi-Agent Framework for Autonomous Steel Production Planning
Anna Ivanova (Colorado School of Mines)
- Author in Simulation of transient temperature and solidification evolution in a continuously cast slab using multiple transverse sections
Pavel IVASHECHKIN (BFI)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Sergey Ivlev (KALUGIN JSC)
- Author in Different Options of Stove Modernization using Innovative Top Combustion Stove of Kalugin Design
Yuji Iwami (JFE steel)
- Co-author in Production conditions of porous iron whisker for the gas reforming in CRIP-D ironmaking process
Max Iwamura
- Author in Blast Furnace Hearth Relines From Concept to Construction
Leon Jacobs (Tata Steel Nederland Technology BV)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Pascal Jacques (Université Catholique de Louvain)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Jeremy Jactard (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Mohammad Jafarzadeh (K1-MET)
- Author in Hydrogen plasma smelting reduction of Cr2O3/Chromite: the first step to direct and sustainable production of stainless steel
Nils Jäger (thyssenkrupp Steel Europe AG)
- Co-author in Investigation of the smelting and carburization behavior of DRI-Pellets under an inert atmosphere using various carburization agents.
Matthias Jahn
- Co-author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
Franco JAIME (TRANSVALOR)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Megha Jampani (Hatch Ltd)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Pill Yong Jang
- Co-author in Development of an Optimized Strand-EMS for Improved Microstructure and Reduced Segregation in Continuous Casting
Otmar Jannasch (Smart Steel Technologies GmbH)
- Author in Energy-efficient production based on a comprehensive scheduling including an optimized temperature guidance and heat pacing
Andreas Janz (Hüttenwerke Krupp Mannesmann GmbH)
- Co-author in Monitoring of blast furnace wall pressure profiles and their relation to process efficiency
Andreas Janz (Hüttenwerke Krupp Mannesmann GmbH)
- Co-author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
Olivier JAOUEN (TRANSVALOR S.A.)
- Author in Finite Element Thermo-Mechanical Modeling of Continuous Casting: Simultaneous In-Mould Solidification and Mould Condition Analysis for High-Speed Billet Casting with Danieli’s Power Mould™
Tova Jarnerud Örell (Swerim AB)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Author in Sustainable biogenic carbon for metallurgical use
Jan Jaros (COMTES FHT a.s.)
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
Mirko Javurek (Johannes Kepler Universität Linz, Institut für Strömungslehre und Wärmeüübertragung)
- Author in Continuous Casting Mold Flow with Original and Used Nozzle Geometries: Numerical Flow Simulations and Water Model Measurements
- Author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Robrecht Jennen (CRM Group)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Ralf Jennes (Hatch Küttner)
- Co-author in Technical Considerations in the Design of Capture Systems to Control Fugitive Releases in Ironmaking and Steelmaking
Jihong Ji (SMS group)
- Author in Ammonia as a Cost-Effective Energy Carrier for Decarbonization in the European Steelmaking Industry
Juan Jiménez (Celsa Group)
- Co-author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
Hana Jirkova (Research and Testing Institute Pilsen)
- Author in Hydrogen Embrittlement in Pipeline and Cast Steels for Gas Transport Infrastructure
JONGOH JO (HYUNDAI STEEL)
- Author in Optimizing Biomass Gasification-Driven Carburization for Carbon-Neutral Hydrogen-Based Steelmaking
- Co-author in The effect of hot heel condition on EAF operations with HBI bucket charging
Jangho Jo (University of Newcastle)
- Author in Influence of HDPE addition on microstructure transformation during coking of Australian coking coals
Junhyun Jo (Hyundai steel)
- Co-author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Per Johansson (Höganäs AB)
- Co-author in Improved EMLI Technology for Early Slag Detection and Enhanced Steel Yield and Quality
Wayde Johnson (Hatch Ltd.)
- Author in Technical Considerations in the Design of Capture Systems to Control Fugitive Releases in Ironmaking and Steelmaking
William Johnson
- Co-author in Optimizing DRI Production with Lime-Based Coatings Agents
Sven Johnson (EMG Automation GmbH)
- Co-author in Smarter Galvanizing through Zinc Coating Optimization with EMG iCASS®: A Modular AI-Driven Platform
Christer Jonsson (SSAB EMEA AB)
- Co-author in New insights from the online LUS grain size measurements
Anno Jordan (EMG Automation GmbH)
- Author in Smarter Galvanizing through Zinc Coating Optimization with EMG iCASS®: A Modular AI-Driven Platform
- Co-author in Advanced Coating Thickness Measurement in Electrical Steel Manufacturing with EMG SOLID® DFT
João José dos Santos Carvalho (ArcelorMittal Tubarão)
- Author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
- Author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Kamal Joubarani (Hatch Ltd.)
- Author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
- Author in Slag Modelling and Design Optimisation for Enhanced Performance in Electric Smelting Furnaces
KI CHUL Ju
- Co-author in Development of an Optimized Strand-EMS for Improved Microstructure and Reduced Segregation in Continuous Casting
Peter Juchmann (Salzgitter Flachstahl GmbH)
- Author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
YEONGJIN JUN (Hanyang University)
- Author in Evolution Behavior of Non-Metallic Inclusions in Al-killed Ti-bearing Ferritic Stainless Steel
Yeong Jin Jun (The Steelmaking Research Group, Hyundai Steel)
- Co-author in Effect of Magnesium Deoxidation on Non-Metallic Inclusions in Austenitic Stainless Steel
DONGYUL JUNG (Hanyang University)
- Author in Evolution Behavior of Non-Metallic Inclusions in Al-killed Ti-bearing Ferritic Stainless Steel
jinwoo jung (hyundai-steel)
- Author in Wave Control Using Machine Vision in the Finishin Mill
Janne Jyrinki (ENTECH)
- Author in Replacement of Conventional Gas Burners with Electrical Resistive Heating for Tundish processes: A Sustainable Approach within the CITADEL Project
Judit Kaknics (ArcelorMittal Maizières Research)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Rainer Kaltseis (Primetals Technologies Austria)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Marina Kalugina (KALUGIN JSC)
- Co-author in Different Options of Stove Modernization using Innovative Top Combustion Stove of Kalugin Design
Gil-mo Kang (Hyundai Steel)
- Co-author in The application of bar cooling technology to plate mills for throughput and utilization improvements
Youn-Hee Kang (POSCO)
- Author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
youngjo kang (Dong-A University)
- Author in Effect of slag conditions on the wetting behavior between blast furnace slag and cokes
- Author in Study of the reduction of a hematite pellet by CO-H2 mixture gas
SUCHANG KANG (POSCO)
- Author in Evolution Behavior of Non-Metallic Inclusions in Al-killed Ti-bearing Ferritic Stainless Steel
Mari Kangas (Outokumpu Stainless Oy)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Petri Kannisto (VDEh-Betriebsforschungsinstitut BFI)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Alper Kanyilmaz (Politecnico di Milano)
- Author in Laser Cutting of Key Metals in the Construction Industry
Maciej KAPLAN (GreenIron)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Manish Kumar Kar (Norwegian University of Science and Technology)
- Author in Carburization with methane of different iron-bearing oxide pellets reduced by hydrogen
Gökhan Karagülmez (Universität Duisburg-Essen)
- Co-author in Investigation of the smelting and carburization behavior of DRI-Pellets under an inert atmosphere using various carburization agents.
Andrey Karasev (KTH Royal Institute of Technology)
- Co-author in Comparison of direct reduction by CO gas and carbonaceous materials
Josef Kasl (Research and Testing Institute Pilsen)
- Co-author in Hydrogen Embrittlement in Pipeline and Cast Steels for Gas Transport Infrastructure
Firew Tullu Kassaye (Silesian University of Technology)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
Saku Kaukonen (Sapotech Oy)
- Author in ADVANCING CONTINUOS CAST SEMI-PRODUCT QUALITY THROUGH A DIGITAL TWIN FRAMEWORK
- Author in AI-BASED SURFACE INSPECTION AND 3D PROFILING FOR QUALITY ASSURANCE IN STEEL PRODUCT GRINDING
- Author in Metallurgical Quality Assessment Of Continuous Casting Combining AI, Sensor Information and Machine Vision
Daniel Kaulbars
- Co-author in Blast Furnaces CO2 mitigation: Ekofor technology (E.S.C.H. gmbh) for BLUAIR injection (Secondary Raw Material - recycled polymers)
Yalcin Kaymak (VDEh-Betriebsforschungsinstitut GmbH)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Aleksandra Kazachenko
- Author in Hybrid treatment of Electric Arc Furnace Dust for selective zinc recovery
Florian Kek (RHI Magnesita)
- Author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
Jens Kempken (SMS Group)
- Author in BOF Technology in the 21st century - Lives declared dead - or survival of the fittest!
- Co-author in Technology Consulting Meets Operational Excellence to Improve Steelplants Operations
Kati Kemppainen (Åbo Akademi University)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Aaron Keuschnig (Montanuniversität Leoben)
- Author in Predicting the Reduction Kinetics of the Electric Arc Furnace Dust - A Machine Learning Approach
Ahmed Khafagi
- Co-author in Revolutionizing Triple Slitting Technology for Rebar 16mm in the rolling and groove process design: QATAR Steel & POMINI Long Rolling Mills technologies
Diaa Khassem
- Co-author in Revolutionizing Triple Slitting Technology for Rebar 16mm in the rolling and groove process design: QATAR Steel & POMINI Long Rolling Mills technologies
Salman KhoshkRish
- Co-author in Impact of iron source and binder type on the mechanical strength and microtexture of ferro-coke
Stamatis Kiakidis (Tata Steel)
- Co-author in On-line laser cleaning of skin pass rolls
Christoph Kickinger (voestalpine Stahl GmbH)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Lina Kieush
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
In-Jung Kim (Handong Global University)
- Co-author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
Hwi Ung Kim
- Co-author in A Study on reducing the dispersion of the mechanical properties of hot coils through the dynamic adjustment of the coiling temperature
Kyoungwook Kim (hyundai-steel)
- Co-author in Wave Control Using Machine Vision in the Finishin Mill
Jimin Kim (Hyundai Steel)
- Co-author in The application of bar cooling technology to plate mills for throughput and utilization improvements
KYUNTAE KIM
- Author in Development of Oxygen-fuel Burner Design for Electric Arc Furnaces under Supersonic Flow Conditions
Keeyoung Kim (IngenioAI)
- Co-author in Deep Learning Model to Predict the Remaining Time to Close Tap-holes for Blast Furnaces
Jungil Kim (POSCO)
- Author in Investigations on hearth refractory and skull
JAE KI Kim
- Co-author in Development of an Optimized Strand-EMS for Improved Microstructure and Reduced Segregation in Continuous Casting
YOUNGWOO KIM (Hyundai Steel R&D Center)
- Co-author in Development of High-Strength Dual Phase (DP) Steels with Enhanced Ductility
Jun Young Kim (University of California, Irvine)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Kyungsoo Kim (Hyundai steel)
- Co-author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Björn Kintscher (SMS group)
- Co-author in Transforming Steel Manufacturing: Innovations and Achievements in Direct Casting and Rolling
Peter Kinzel (SMS group)
- Co-author in Ammonia as a Cost-Effective Energy Carrier for Decarbonization in the European Steelmaking Industry
- Co-author in Implementation of EASyMelt with Ammonia and HBI Charging to Achieve Ultra Low Carbon Ironmaking
Daniel Kipp (Universität Duisburg-Essen)
- Author in Investigation of the smelting and carburization behavior of DRI-Pellets under an inert atmosphere using various carburization agents.
Eemil Kiviahde (Sapotech Oy)
- Author in Metallurgical Quality Assessment Of Continuous Casting Combining AI, Sensor Information and Machine Vision
Lina Kjellqvist (Thermo-Calc Software AB)
- Co-author in CALPHAD-based Thermodynamic and Kinetic Simulation of Secondary Steelmaking with Focus on Inclusion Formation and Modification
Stefan Klanke (SMS group)
- Co-author in Advancements in Genius CM® Chatter: Enhancing Chatter root cause detection and vibration management at BRS PLTCM
Siegfried Kleber (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in Thermophysical property measurement of selected Nickel based superalloys by voestalpine BÖHLER Edelstahl GmbH & Co KG using a gas-tight Furnace Rheometer System and an Electromagnetic Levitation Apparatus
Bernd Kleimt (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Rainer Klock (thyssenkrupp AT.PRO tec GmbH)
- Author in Hydrogen Pulse Injection into the Blast Furnace Shaft
Gerald Klösch (voestalpine Stahl Donawitz GmbH)
- Co-author in Comparison of methods for modification of oxidic non-metallic inclusions using alkali elements on a laboratory scale
Peter Klut (Danieli Corus)
- Author in FerSol, the new three-in-one water treatment chemical
Peter Klut (Danieli Corus)
- Author in Dry Blast Furnace Gas Cleaning: Technology and Operational Experiences
Cornelia Klüter (University of Duisburg-Essen)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Tobias Knape
- Author in Latest EAF Off-Gas Results Using Deep View Infra-Red Technology
Franziska Kneisel (EMG Automation GmbH)
- Co-author in New insights from the online LUS grain size measurements
Marco Knepper (Hüttenwerke Krupp Mannesmann GmbH)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Markus Koch (SMS group)
- Author in X-Pact® Total Roll Gap Control (TRC®): Improvement of yield and reduction of non-productive time at CCM® Marcegaglia
Herbert Köchner (ASENSO)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Suresh Kodukula (RHI Magnesita)
- Author in Improved EMLI Technology for Early Slag Detection and Enhanced Steel Yield and Quality
Terrence Koehler (Hatch Ltd.)
- Co-author in Electric Smelting Furnace Technology for Green Steelmaking
- Co-author in Slag Modelling and Design Optimisation for Enhanced Performance in Electric Smelting Furnaces
Alexander Kofler (SMS group)
- Co-author in Integrating Centerline and Wedge Control: A Comprehensive Approach to Enhancing Strip Stability, Precision, and Product Quality
Helmut Kogler (LCM)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Niklas Kojola
- Co-author in A Sustainable EAF Slag Practice Based on HYBRIT Laboratory Studies
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Dietmar Kolbeck
- Author in Cu+: A New Standard in Slab Mould Plate Design for Cost-Effective Steel Production
Sebastian Koldorf (MAGMA Gießereitechnologie GmbH)
- Co-author in CC Process optimization through combined digital twin and in-line measurement technology for a stainless-steel slab production
- Co-author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Franz Kolmbauer
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Franz Kolmbauer
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Tatsuya Kon (Kyushu University, faculty of engineering)
- Co-author in Carbothermic reduction of hot rolling sludge by rice husk char with microwave heating
Tatsuya Kon (Kyushu University Faculty of Engineering)
- Co-author in Effect of Carbonaceous Material Graphitization Degree on Carburization Behavior in Fe-C Mixture Powder during Rapid Heating
Alexander König
- Co-author in Bucket Loading and Scrap Yard Logistics Simulation - Optimizing Material Flow and Enhancing Efficiency
- Co-author in PREVENT BOTTLENECKS AND OPTIMIZE LADLE AND CRANE LOGISTICS FOR AN EAF-BOF MELT SHOP
Maximilian Köpf
- Author in Circored as a Pre-Reduction Step for Low-Grade Iron Ores
Sven Kopmeyer
- Author in Cu+: A New Standard in Slab Mould Plate Design for Cost-Effective Steel Production
Gabriel Korkmaz (SMS group)
- Author in Adapting to age: Upgrading Coke Oven Machines for sustainable plant longevity
Suhat Korkmaz (Tosyali Holding)
- Co-author in High Speed Billet Casting: Introduction of a new Billet CCM at Tosyalı Demir Çelik
Marc Köster (VDEh-Betriebsforschungsinstitut GmbH)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Martina Koukolíková (COMTES FHT a.s.)
- Author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
Markus Kovac
- Co-author in New, future ready production network for non grain oriented electrical steel
Matthias Kozariszczuk (VDEh-Betriebsforschungsinstitut GmbH)
- Co-author in Ensured fresh water supply by waste and process water treatment
Petra Krahwinkler
- Co-author in From Data to benefit - application of AI technologies in steel production
- Co-author in The Pathway to Autonomous Ironmaking
Mathis Kral (SMS group)
- Co-author in Optical Measurement of raw material particle size
Philipp Krämer (SMS group)
- Co-author in Hot DRI Material Gate – A smart product for green steelmaking in a digitalized future
Artemy Krasilnikov (SMS group)
- Author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
- Co-author in Case study on the improved reliability and efficiency of the HD moldFO+ fiber optic mold monitoring system
Hans-Jörg Krassnig
- Author in Influence of Hydrogen-DRI on the EAF process
Michael Krätzner (SALZGITTER FLACHSTAHL GMBH)
- Author in Demonstration of XR experience via Hands-On Session
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Fabian Krause (SMS Group)
- Author in Development and Testing of a Hydrogen-Fueled Burner-Injector System for EAF Applications: A Clusters4Future Initiative
Horst Krauthäuser (IMS Messsysteme GmbH)
- Co-author in New Optical Flatness Measurement by Magnetic Deflection
Jay Kremm (Danieli Corporation)
- Author in Optimizing Energy Media Consumption and Reducing Greenhouse Gas Emissions in Coil Coating Lines
Niko Kremsmair (Eisenwerk Sulzau-Werfen R. & E. Weinberger AG, Tenneck, Austria)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Mark Kreso
- Author in Advanced Coating Thickness Measurement in Electrical Steel Manufacturing with EMG SOLID® DFT
- Author in Smarter Galvanizing through Zinc Coating Optimization with EMG iCASS®: A Modular AI-Driven Platform
Matthias Kretschmer (SMS group)
- Author in Advancements and future prospects of zero emission galvanizing technologies
Herbert Kreuzer (voestalpine Stahl GmbH)
- Co-author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
Konrad Krimpelstätter (Primetals Technologies Austria)
- Co-author in High End Steel Grade Production with Advanced Cooling Technologies - possibilities for AHSS
- Co-author in Hot strip surface quality improvements by: Work roll lubrication and cooling package for hot strip mills with a new special feature for a continuous lubrication
Thomas Kronberger
- Co-author in The Pathway to Autonomous Ironmaking
Silas Krug (HiScience GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Ulrich Krupp (RWTH Aachen University)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
Ulrich Krupp (RWTH Aachen University / IEHK Steel Institute)
- Co-author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Yukihiro Kubota (Process Research Laboratories, Nippon Steel Corporation)
- Co-author in Control of Low Bulk Density Region around Briquette in Briquette Blending Carbonization Process
Oleg Kudrya (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Enhancing the Quality of Continuously Cast Products: Optimized Caster Design and Process Tuning for High-Quality Blooms
Hisashi KUMAOKA (Experimental Blast Furnace Project Division Process Research Laboratories　 NIPPON STEEL CORPORATION)
- Author in Development of the Super COURSE50 blast furnace process
Pankaj Kumar (PhD candidate)
- Author in Green Manganese steel from remelting of hydrogen based Direct Reduced Iron (DRI) and green Ferroalloy: a CO2 free approach
Sandeep Kumar (LKAB)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Beat Kündig (SMS group)
- Co-author in The new MSR bloom caster at Saarloha Advance Materials, Pune
Sudhanshu Kuthe (KTH Royal Institute of Technology)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Galen Kutlubay (Haldor Tospoe)
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Umit Baris Kutman (Institute of Biotechnology, Gebze Technical University, Kocaeli, Turkiye)
- Co-author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Roman Kuziak (L-GIT)
- Author in Modular hybrid technology in the steel plant production
Mark LaBarbera (FuelCell Energy Inc.)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Helmut Lachmund (Badische Stahl-Engineering)
- Author in Secondary metallurgy challenges in the transformation from oxygen to electric steelmaking
Laura Laid (Sant'Anna School of Advanced Studies | SSSA)
- Author in DynReAct – An open-source production planning software
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
Salvatore La Manna (University of Salerno - Department of Industrial Engineering)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Torsten Lamp (MINKON)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Andrea Lanari (SMS group)
- Co-author in Innovative Continuous Minimill Technology (CMT®) for sustainable long product production
Andrea Landini (FERALPI SIDERURGICA)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Andrea Landini (FERALPI SIDERURGICA)
- Author in Modular hybrid technology in the steel plant production
Andrea Landini (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Oliver Lang (Primetals Technologies Austria)
- Author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Marco Lapasin (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Flexible pathways for green iron production
Antoine Laramée (National Research Council of Canada)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Mohamed Samir Larhrib (United Steel Industrial Co.)
- Author in On the benefits of switching from lime to dololime fines injection in electric arc furnace
Raquel Lazcano (EVIDEN)
- Co-author in Application of Federated Learning to enhance model-based Decision Support for EAF online Monitoring and Control at multiple plants
Olivier Lebrun (Swiss Steel Group)
- Author in Green Steel strategy and circular economy at Swiss Steel Group
Nikolaus Lechner (RHI Magnesita)
- Co-author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
MINJOO LEE (Hanyang University)
- Co-author in Physicochemical properties of electric steelmaking slags for the mitigation of CO2 emissions: Active use of HBI with various intrinsic carbon
Eunkyu Lee (Hyundai steel)
- Co-author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Seungmoon Lee (POSCO Technical Research Laboratories)
- Author in Deep Learning Model to Predict the Remaining Time to Close Tap-holes for Blast Furnaces
Ji Eon Lee (Dong-A University)
- Author in Study of the reduction of a hematite pellet by CO-H2 mixture gas
Jangwon Lee
- Co-author in Development of an Optimized Strand-EMS for Improved Microstructure and Reduced Segregation in Continuous Casting
Joodong Lee (Expresslab Co.,Ltd.)
- Author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Soonho Lee
- Author in Development of an Optimized Strand-EMS for Improved Microstructure and Reduced Segregation in Continuous Casting
yoosung Lee (hyundai-steel)
- Co-author in Wave Control Using Machine Vision in the Finishin Mill
Dong Soo Lee
- Author in Optimizing Biomass Gasification-Driven Carburization for Carbon-Neutral Hydrogen-Based Steelmaking
- Author in Pellet reducibility index management range for direct reduction plant
Soonho Lee (RMIT University)
- Co-author in Influence of HDPE addition on microstructure transformation during coking of Australian coking coals
JM Lee (HYUNDAI STEEL)
- Author in The effect of hot heel condition on EAF operations with HBI bucket charging
SangYoung Lee
- Author in A Study on reducing the dispersion of the mechanical properties of hot coils through the dynamic adjustment of the coiling temperature
Eunsame Lee (POSTECH)
- Co-author in A Study on enhancing accuracy of AI-based RDT automatic control in hot rolling process
Seoungmoon Lee (POSCO)
- Co-author in Investigations on hearth refractory and skull
Judith le Fèvre (FerrTech)
- Co-author in FerSol, the new three-in-one water treatment chemical
Joachim Lehner (Senior Expert Primary Metallurgy)
- Co-author in Logistics Simulation for the Green Steel Transition: Optimizing Production and Sustainability
Thomas Leitner (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Thermophysical property measurement of selected Nickel based superalloys by voestalpine BÖHLER Edelstahl GmbH & Co KG using a gas-tight Furnace Rheometer System and an Electromagnetic Levitation Apparatus
Melanie Leitner (K1-MET GmbH)
- Co-author in Sensor solutions for online analysis of post-consumer scrap
Ralf Lenz (PSI Software SE)
- Co-author in HyMAS: A Hybrid Multi-Agent Framework for Autonomous Steel Production Planning
Martins Demuner Leonardo
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Manuel Leuchtenmüller (Montanuniversität Leoben)
- Author in Comparative Analysis of CO and H2 Reduction Mechanisms in Electric Arc Furnace Dust
- Author in Hybrid treatment of Electric Arc Furnace Dust for selective zinc recovery
- Co-author in Predicting the Reduction Kinetics of the Electric Arc Furnace Dust - A Machine Learning Approach
De Li (Yanshan university)
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
Wei Li (Technology Center, Shanxi Taigang Stainless Steel Co. Ltd.)
- Co-author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
Yu Li (University of Science and Technology Beijing)
- Co-author in The Effect of Crystallization Temperature on the Properties of Silicon Manganese Slag Cast Stone
Meng Li (Åbo Akademi University)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Ruowei Li (Politecnico di Milano)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
Meng Meng Li
- Author in A New Technology for Bar and Wire Rod Mills
Ying Li (COMTES FHT a.s.)
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
De Li (State Key Laboratory of Crane Technology, Yanshan University, Qinhuangdao, 066004, China)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
Marten Lichte (VDEh-Betriebsforschungsinstitut GmbH)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
- Co-author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
Seungho Lim (POSCO)
- Co-author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
Jéssica Lima (Arcelormittal Tubarão)
- Co-author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Johan Lindwall (Swerim AB)
- Author in Finite Element modelling of skid marks on steel slabs in a walking beam reheating furnace
- Author in Relaxation and creep in hot coiled steel strip
Falco Lischke (thyssenkrupp Steel Europe AG)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Robert Littringer (Chair of Ferrous Metallurgy, Montanuniversitaet Leoben)
- Author in Influence of the cooling strategy on the intergranular crack formation during continuous casting of TRIP steels produced from low-grade scrap
- Co-author in High temperature oxidation in steel processing under different process conditions, atmospheres and rising levels on tramp elements
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Caiyi Liu (Yanshan university)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
Wenfeng Liu (University of Amsterdam)
- Co-author in Steel metamaterials for EV battery box protection
Umberto Liuzzo (Marcegaglia Ravenna Plant)
- Co-author in X-Pact® Total Roll Gap Control (TRC®): Improvement of yield and reduction of non-productive time at CCM® Marcegaglia
Umberto Liuzzo (Marcegaglia Steel SpA)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Erica Liverani (Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Antoine Llau (ArcelorMittal France)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Hannah Lomas (University of Newcastle, Australia)
- Co-author in Impact of iron source and binder type on the mechanical strength and microtexture of ferro-coke
- Co-author in Influence of HDPE addition on microstructure transformation during coking of Australian coking coals
Edward Long
- Author in Reducing blast furnace CO2 emissions
Mariano Longo (Danieli Centro Combustion S.p.A.)
- Author in DIGITAL TRASFORMATION IN REHEATING AND HEAT TREATMENT FURNACES: SHP
Johan Lönnqvist (Swerim AB)
- Author in In-Situ Grain Size Measurement During Hot Rolling Simulations With Dynamic Recrystallization By Laser Ultrasonics
Pedro Lopes Martins
- Co-author in Optimizing DRI Production with Lime-Based Coatings Agents
Angel Lopez (CEINNMAT INNOVACIÓN INNCEINNMAT SL)
- Author in Upgrading of low-quality iron ores and mill scale with low carbon technologies
Francisco Lopez (RHI Magnesita)
- Co-author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
Johannes Losacker (RWTH Aachen University)
- Author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
Seppo Louhenkilpi (Casim Consulting Oy)
- Author in ADVANCING CONTINUOS CAST SEMI-PRODUCT QUALITY THROUGH A DIGITAL TWIN FRAMEWORK
Guanghua Lu
- Author in Impact of iron source and binder type on the mechanical strength and microtexture of ferro-coke
Yu-Chiao Lu (KTH Royal Institute of Technology)
- Author in Comparison of direct reduction by CO gas and carbonaceous materials
Bruno Luchini
- Co-author in CFD and FEM study on redesigning the mould geometry of the thin slab caster of Tata Steel in IJmuiden for enhanced casting performance
Pavel Ludvik (COMTES FHT a.s.)
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
Massimo Lugnani (SMS group)
- Author in Latest SMS EAF technologies for safety and green steel production
Stéphane Lutsen (ArcelorMittal Dunkerque)
- Co-author in Additional scrap melting capacity with dual-flow post-combustion lance at ArcelorMittal Dunkerque
Timm Lux
- Co-author in Globalization cancelled?
Francesco Luzi (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Irene Luzzo (Rina Consulting CSM SpA)
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
- Co-author in SMS ZERO2Flame HY2 burner for reheating furnaces
Viljami Maakala (Coolbrook)
- Co-author in Advancements in Electrification and Decarbonization Technologies for High-Temperature Process Heating in Steel Manufacturing: The Role of Coolbrook's Rotodynamic Technology
Matteo Macario (GF-ELTI)
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
Davide Maghini
- Author in A combined experimental–numerical approach to assess the effects of quenching transfer time on the microstructure and mechanical properties of a Ti-6Al-4V alloy
Marianne Magnelöv (Swerim AB)
- Author in Efficiency of bio-carbon as slag reduction and slag foaming agent in EAF
- Co-author in Effects of H2 as energy source and biocarbon injection in EAF
Hans Magnusson (Swerim AB)
- Author in In-Situ Grain Size Measurement During Hot Rolling Simulations With Dynamic Recrystallization By Laser Ultrasonics
- Co-author in Relaxation and creep in hot coiled steel strip
Riccardo Magrofuoco
- Co-author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
Milad Mahdi (Prosimet S.p.A.)
- Co-author in BORON IN CASTING POWDER: INSIGHTS FROM PROSIMET STUDIES
Jurgen Malbrancke (CRM Group)
- Author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
Enrico Malfa (Tenova SpA)
- Author in Dry granulation process and technology for LF slag treatment
Mikael Malmström (Swerim AB)
- Author in In-Situ Grain Size Measurement During Hot Rolling Simulations With Dynamic Recrystallization By Laser Ultrasonics
- Author in Laser ultrasonics for microstructure verification of heat treatments and thermal processes (LUMHEAT)
- Author in Online and Real-Time Recrystallized Fraction Estimation in Steel Rolling Processes by Laser Ultrasound
- Co-author in New insights from the online LUS grain size measurements
Michele Manaresi (Marcegaglia Ravenna SpA)
- Co-author in Case study on product quality management on a continuous galvanizing line thanks to digital solution
Orazio Manni (Rina Consulting Centro Sviluppo Materiali)
- Author in An integrated approach to steelmaking decarbonization: HYDRA project. Description of the innovative open platform and first results
Pekka Mäntylä
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Karthik Manu (Swerim)
- Author in Innovative Approaches To Sustainable FeCr Production Through Biocarbon and H2 Utilization
Carlo Mapelli (Politecnico di Milano)
- Author in Assesment of the natural absorption of CO2 performed by steelmaking slag
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
- Co-author in Clean iron production by self-reducing agglomerates made in biochar and mill scale: a comparison in reduction efficiency as a function of biochar quality and properties
- Co-author in Multi-alloy production via chips compaction and hot rolling
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
Fabio Marchini (Tenaris)
- Author in Optimization of scrap mix in EAF steelmaking
Cedric Maresch (Limax GmbH)
- Author in Oiling of Steel Strip: A New, Intelligent Oiling Machine Combines Electrostatic Oiling With High-Precision Oil Film Measurement, Ensuring Higher Process Security and Lower Oil Consumption
Giacomo Mareschi Danieli (Danieli & C. Officine Meccaniche SpA)
- Author in The Steel Industry in the Mediterranean Area: Challenges, Opportunities and Enabling Technologies
Daniel Marjavaara (LKAB)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Itziar Marquez (Reydesa Recycling SL)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Mathew Marron (Binding Solutions Ltd)
- Co-author in Cold Agglomerated Iron Ore Pellets Industrial Trial – High quality manufacturing and their performance in the Blast Furnace
Irmtraud Marschall (K1-MET GmbH)
- Co-author in Electrical conductivity modelling of molten slag based on viscosity data - A mechanistic approach
- Co-author in Thermophysical property measurement of selected Nickel based superalloys by voestalpine BÖHLER Edelstahl GmbH & Co KG using a gas-tight Furnace Rheometer System and an Electromagnetic Levitation Apparatus
Antoine Marsigny (University of Lorraine, Institut Jean Lamour)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Maria Martinez Pacheco (Tata steel Nederland Technology)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Carla Martini (Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Isadora Martins (Hatch Ltd)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Ricardo Vieira Regis De Almeida Martins (Ternium Brasil)
- Co-author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
Johan Martinsson (Swerim AB)
- Author in A Sustainable EAF Slag Practice Based on HYBRIT Laboratory Studies
Kersten Marx (BFI)
- Author in Upgrading of low-quality iron ores and mill scale with low carbon technologies
- Co-author in Flow and solidification modeling in continuous casting of steel: an European expertise mapping at a glance and positioning at a global level
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Marco Mascotto
- Co-author in Green Hydrogen in Cogne
Niccolo Massarelli (RINA Consulting - CSM)
- Author in Alternative Annealing Process for NGO Electrical Steels Using Hydrogen Combustion: A Comparative Study
- Author in Replacing natural gas with Hydrogen in heat treatment furnaces: impact on scale formation, surface quality and pickling kinetics of stainless steel
Luca Mastropasqua (University of Wisconsin-Madison)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Ryosuke Masuda (JFE Steel Corporation)
- Author in Automation on thermal control of blast furnace
Dirk Masurat (Chemische Fabrik Budenheim KG)
- Co-author in Yield increase by hot strand coating in continuous casting of long product
Ismael Matino (Scuola superiore di studi universitari e di perfezionamento Sant’Anna)
- Author in Models for simulating gas and energy management in the transition of integrated steelworks to high hydrogen direct reduction-based processes
- Author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
- Author in Slag changes in future steelmaking scenarios: simulation investigations
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Nikolaos Matskanis (CENTRE D'EXCELLENCE EN TECHNOLOGIES DE L'INFORMATION ET DE LA COMMUNICATION)
- Author in Demonstration of XR experience via Hands-On Session
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Tim-Oliver Mattern (Carl Bechem GmbH)
- Author in SMART Grease selection for Roller Bearings of Continuous Casters and Rolling Mills to reduce maintenance cost and extend bearing life.
Florent Mauret (SMS group)
- Author in Implementation of EASyMelt with Ammonia and HBI Charging to Achieve Ultra Low Carbon Ironmaking
Jean-Louis Maurice (Evertz Europe S.A.)
- Author in AI-BASED SURFACE INSPECTION AND 3D PROFILING FOR QUALITY ASSURANCE IN STEEL PRODUCT GRINDING
Yann Maurice (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Anna Mayrhofer (Primetals Technologies)
- Author in Transforming Steelmaking: Advanced Automation Solutions Powering the Twin Transition
- Co-author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
Thomas Mc-Farlane Hoad (MontanuniversitätLeoben)
- Co-author in Zinc flexible RecoDust process
Mykyta Mekshun (ArcelorMittal Exploitation minière Canada s.e.n.c.)
- Co-author in Bio-char production and usage for iron ore pelletization
Andreas Melcher (Primetals Technologies Austria GmbH)
- Author in Crafted Scrap: Scrap Yard Automation and Advanced Sensors
Mattia Mele (Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Wanda Melfo (Tata Steel Nederland Technology B.V.)
- Author in Investigation on the use of organic acids to pickle the oxide scale of carbon steel hot rolled strips
Ward Melis (KU Leuven)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Mauro Meneghin (Danieli Automation S.p.A.)
- Author in Application of Deep Learning technique to improve the scrap quality
Xiangjun Meng (Shougang Group China)
- Co-author in Advancements and Applications of Steel Coil Transportation Equipment Technology in Modern Steel Strip Plants
Christian Mengel (SMS group)
- Co-author in Advancements in Genius CM® Chatter: Enhancing Chatter root cause detection and vibration management at BRS PLTCM
- Co-author in Integrating Centerline and Wedge Control: A Comprehensive Approach to Enhancing Strip Stability, Precision, and Product Quality
MIKEL MERCHAN ZUBIETA (TECNALIA)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Ingo Mergelkamp
- Co-author in Globalization cancelled?
Mattia Merlin (Department of Engineering, University of Ferrara)
- Author in A combined experimental–numerical approach to assess the effects of quenching transfer time on the microstructure and mechanical properties of a Ti-6Al-4V alloy
Michiel Mertens (P-Laser)
- Co-author in On-line laser cleaning of skin pass rolls
Martina Messutti (Tenova SpA)
- Author in Dry granulation process and technology for LF slag treatment
Eric Meta (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Nicolas Meyer (UGITECH)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
David Michel
- Author in Volteron - Technology for Green Steel
Lorenzo Micheletti (SMS group)
- Author in Innovative Decarbonization Strategies: Thermal dry reforming for enhanced blast furnace efficiency
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Susanne Michelic (Montanuniversitaet Leoben)
- Co-author in Comparison of methods for modification of oxidic non-metallic inclusions using alkali elements on a laboratory scale
- Co-author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
Leon Michels (SMS group)
- Co-author in Conseal for slabs: Patented solution for optimizing start of cast
Dennis Michl (SMS group)
- Co-author in Advanced Ring Rolling Simulations with Embedded Machine Control Systems
Andrea Miconi (Danieli & C. Officine Meccaniche S.p.A.)
- Author in A LOOK AT DANIELI DCM'S STRATEGIC PLANT UPGRADES ACROSS ITALY
Diana Mier Vasallo (Sidenor I+D)
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Benoit MIGNON (CRM Group)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Alessandro Milan (Acciaierie di Calvisano S.p.a. Feralpi Group - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Robert Millner (Primetals Technologies Austria GmbH)
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
Gerfried Millner (School of Material Science and Engineering, Nanyang Technological University)
- Author in Explainable AI for Property Prediction in Scrap-Based Steel Production: A Public Data Implementation
Alessio Milocco (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Technological solutions for pollutants abatement in Steel Meltshop fumes
Greta Minelgaite (Reydesa Recycling SL – Fundacion Inatec)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Daphne Mirabile (RINA Centro sviluppo Materiali)
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
- Author in Kinetics of Direct Reduction of iron ore pellets: understanding rate-limiting steps in hydrogen-based reduction of low- and high-grade pellets
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Olivier Mirgaux (University of Lorraine, Institut Jean Lamour)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Markus Mirz (SMS group)
- Author in Sustainable repairs of machine parts in rolling mills by advanced coating technologies
Tamoghna Mitra (SMS group)
- Co-author in Complexity of decision-making process through sensitivity analysis for decarbonization technologies
- Co-author in Transforming Underperforming Steel Plants into Industry Leaders Using State-of-the-art Sustainable Technologies
Chayan Mitra (RHI Magnesita-Sensors)
- Author in Improved EMLI Technology for Early Slag Detection and Enhanced Steel Yield and Quality
Andreas Mittermair (Primetals)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Simon Mittlböck
- Author in Hot strip surface quality improvements by: Work roll lubrication and cooling package for hot strip mills with a new special feature for a continuous lubrication
Simon Moll (Montanuniversität Leoben)
- Co-author in Electrical conductivity modelling of molten slag based on viscosity data - A mechanistic approach
Davide Mombelli (Politecnico di Milano - Dipartimento di Meccanica)
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
- Author in On the benefits of switching from lime to dololime fines injection in electric arc furnace
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
- Co-author in Clean iron production by self-reducing agglomerates made in biochar and mill scale: a comparison in reduction efficiency as a function of biochar quality and properties
Ali Mohammad Monfared
- Author in CDRI preheating system by off-gas heat recovery for charging into EAF
- Co-author in Towards Smarter EAF Steelmaking: AI-Powered Slag Optimization with Real-Time Process Adaptation
Maxime Monnoyer (Fives KEODS)
- Author in Case study on product quality management on a continuous galvanizing line thanks to digital solution
André Moreau (Hatch)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
CARLO MORELLI (PW)
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Roberto Moreschi (Fassa Bortolo)
- Co-author in Assesment of the natural absorption of CO2 performed by steelmaking slag
Massimo Moretti (DUFERCO Group)
- Co-author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Agnieszka Morillon (FEhS Institut fűr Baustoff Forschung)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Volker Mörkens (LSA GmbH)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Vincenzo Morreale
- Author in EAF Waste Heat Recovery: Turning Industrial Waste into Sustainable Energy
- Author in Green Hydrogen in Cogne
Alessandro Morri (Alma Mater Studiorum - Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
- Co-author in Effect of short-time annealing on recrystallization and texture evolution in an electrical steel
MIchelangelo Mortello (Institute of Welding)
- Co-author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Elena Moscoloni (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Camille Moukarzel (Fives Stein)
- Co-author in Cutting-Edge Technologies To Produce Electrical Steel
Elsayed Mousa (Swerim AB)
- Author in Innovative Approaches To Sustainable FeCr Production Through Biocarbon and H2 Utilization
antoine moussalem
- Author in Development of a 1D Numeric model for axial pebble bed Thermal Energy Storage (TES) as a design decision tool for waste heat recovery in steel plants
Stefan Mühlböck (Primetals Technologies GmbH)
- Author in Logistics Simulation for the Green Steel Transition: Optimizing Production and Sustainability
Rishiraj Mukherjee (Kanthal)
- Co-author in Electrification of heating in steelmaking – an enabler of fossil-free steel
Yannis Muller (Université Catholique de Louvain)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Dirk Müller (Thyssenkrupp Rasselstein)
- Author in DynReAct – An open-source production planning software
Marco Munari (Project Group s.r.l.)
- Co-author in Optimization of Process Control and Energy Consumption in Hot Flat Ring Rolling Using Interactive Real-Time Software
Steve Münch (SMS group)
- Co-author in Yield increase by hot strand coating in continuous casting of long product
Sebastian Münstermann (RWTH Aachen University)
- Co-author in On the influence of EAF based steelmaking on AHSS
TAICHI MURAKAMI (Tohoku University)
- Co-author in Production conditions of porous iron whisker for the gas reforming in CRIP-D ironmaking process
Yury Murzin (KALUGIN JSC)
- Co-author in Different Options of Stove Modernization using Innovative Top Combustion Stove of Kalugin Design
Mohaddese (Niloo) Nabizadeh
- Co-author in Optimizing DRI Production with Lime-Based Coatings Agents
Daniela Nachazelova (COMTES FHT a.s.)
- Author in Development and Additive Manufacturing of MoNiCr Nickel Alloy for Energy Industry Applications
Angelo Naclerio
- Co-author in Advancing Sustainability in Continuous Casting of Steel Strategies for Productivity, Traceability, and Waste Reduction
Tetsuya Nagasaka (New Industry Creation Hatchery Center, Tohoku University, Japan)
- Co-author in Effect of gas volume expansion on carbothermic reaction of phosphoric acid to produce white phosphorus
Ali Najari
- Co-author in CDRI preheating system by off-gas heat recovery for charging into EAF
Yuki Nakama (Sekisui Chemical Co., Ltd,)
- Author in Innovative CO2 to CO Conversion Technology for Carbon Neutrality with High Reaction Yield and Economic Efficiency
Kaoru Nakano
- Co-author in Development of Degradation Model for Sinter Ore Considering Particle Size Distribution
Alberto Nardini
- Author in Revolutionizing Triple Slitting Technology for Rebar 16mm in the rolling and groove process design: QATAR Steel & POMINI Long Rolling Mills technologies
Shambhu Nath (Tata steel limited)
- Co-author in Breaking boundaries: Tata Steel's H Blast Furnace sets new standards
Shungo Natsui (Tohoku University)
- Co-author in Enhancement of tramp elements removal from liquid iron by molten oxysulfide electrolysis
Jean-Paul Nauzin
- Co-author in Continuous Annealing and Galvanizing Line electrification: decarbonation as a new opportunity to produce HSS and AHSS by flash annealing
Sergej Nesterov
- Author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Alexander Neumann (SMS group)
- Co-author in Advanced Ring Rolling Simulations with Embedded Machine Control Systems
Monia Niero (Sant’Anna School of Advanced Studies, Sustainability and Climate Interdisciplinary Center, via Santa Cecilia 24, Pisa, Italy)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in How can Life Cycle Assessment support the definition of decarbonization strategies: lessons learnt from the GreenHeatEAF project
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
Marian Niesler (Sieć Badawcza Łukasiewicz - Górnośląski Instutut Technologiczny)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Farnaz Niknam moghaddam
- Author in Towards Smarter EAF Steelmaking: AI-Powered Slag Optimization with Real-Time Process Adaptation
Kazuto Nishihiro
- Author in Development of Degradation Model for Sinter Ore Considering Particle Size Distribution
Haruka Nishiyama (Sekisui Chemical Co., Ltd,)
- Co-author in Innovative CO2 to CO Conversion Technology for Carbon Neutrality with High Reaction Yield and Economic Efficiency
Achille Fabien Nkwitchoua Djangang (VDEh Betriebsforschungsinstitut,)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Matteo Nobile (Danieli & C. Officine Meccaniche S.p.A.)
- Co-author in Work Roll Cooling Optimization
Hiroshi Nogami (Tohoku University)
- Co-author in Enhancement of tramp elements removal from liquid iron by molten oxysulfide electrolysis
Isabelle Nolet (Hatch Ltd.)
- Co-author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
Christoph Nölle (BFI)
- Author in DynReAct – An open-source production planning software
- Author in Exploring capabilities of an auction-based multiagent system in real-time reactive scheduling
Rikke Nordstroem
- Co-author in Green Manganese steel from remelting of hydrogen based Direct Reduced Iron (DRI) and green Ferroalloy: a CO2 free approach
Oleksii Novokshonov (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Enhancing the Quality of Continuously Cast Products: Optimized Caster Design and Process Tuning for High-Quality Blooms
Erland Nylund (Swerim AB)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Author in Sustainable biogenic carbon for metallurgical use
Wolfgang Oberaigner (Primetals Technologies Austria GmbH)
- Author in FROM DATA TO DECISION: UNIFYING PRODUCTION MANAGEMENT AND TPQC FOR OPTIMIZED STEEL PRODUCTION
Paul Oberhumer (Primetals Technologies)
- Co-author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
ANA OBLANCA GUTIERREZ (AMII)
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Hans-Jürgen Odenthal (SMS group)
- Co-author in Development and Testing of a Hydrogen-Fueled Burner-Injector System for EAF Applications: A Clusters4Future Initiative
Hans-Jürgen Odenthal (SMS group GmbH, R&D Division)
- Author in Advanced fluid flow simulation for the RH process
Mauro Odorico (SMS group)
- Co-author in From Quantity to Quality: Evolving Wire Rod Production to Meet Modern Market Demands with SMS group
Peter Oertelt (Primetals Technologies Austria GmbH)
- Co-author in Logistics Simulation for the Green Steel Transition: Optimizing Production and Sustainability
SEONGTAK OH (Hyundai Steel R&D Center)
- Author in Development of High-Strength Dual Phase (DP) Steels with Enhanced Ductility
Felix Öhman (Swerim AB)
- Co-author in A Sustainable EAF Slag Practice Based on HYBRIT Laboratory Studies
Ko-ichiro Ohno (Kyushu University)
- Co-author in Carbothermic reduction of hot rolling sludge by rice husk char with microwave heating
- Co-author in Effect of Carbonaceous Material Graphitization Degree on Carburization Behavior in Fe-C Mixture Powder during Rapid Heating
Simona Oliverio (Tenova SpA)
- Author in Dry granulation process and technology for LF slag treatment
Daniele Olivieri (Ferriere Nord SPA)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Carlos Olmos (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Marco Ometto (Danieli Automation S.p.A.)
- Author in Application of Deep Learning technique to improve the scrap quality
Ana Oncina Mico (ABB)
- Author in Electrification of High Temperature Heating Demand: A Techno-Economic Perspective on Decarbonized Steel Making
Ayana Ono (Kyushu University Graduate School of Engineering)
- Author in Effect of Carbonaceous Material Graphitization Degree on Carburization Behavior in Fe-C Mixture Powder during Rapid Heating
Joaquin Ordieres Meré (Universidad Politécnica de Madrid)
- Author in DynReAct – An open-source production planning software
- Author in Exploring capabilities of an auction-based multiagent system in real-time reactive scheduling
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Lorenzo Orlietti (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Chris Ormston
- Author in Calix’s Zero Emissions Steel Technology (ZESTY): Breakthrough pilot testing results for the Hydrogen Direct Reduced Iron (H-DRI) process
Joel Orre (Swerim AB)
- Author in Effects of H2 as energy source and biocarbon injection in EAF
- Author in Efficiency of bio-carbon as slag reduction and slag foaming agent in EAF
Bertrand Orsal Reams
- Author in Building the Future: The Role of Digitalization in Modern Steelmaking
Stefano Orselli (Marcegaglia Steel SpA)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Heloisa Orsolini (Shinagawa Refratários do Brasil)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
David Osborne (Primetals Technologies Ltd)
- Author in Reducing blast furnace CO2 emissions
Jonas Oswald (Dürr Systems AG)
- Author in Improvement on energy efficiency systems under volatile production scenarios
Manuel Otto (SSAB Swedish Steel GmbH)
- Co-author in On the influence of EAF based steelmaking on AHSS
Fayssal Oudich (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Theresa Overbeck (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
- Co-author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
Bahadir OZAL
- Author in NEW GENERATION IN PRE-HEATING TECHNOLOGY FOR ELECTRIC STEEL MAKING HIGHER PRODUCTIVITY WITH REDUCED POWER
Timo Paananen (Coolbrook)
- Author in Advancements in Electrification and Decarbonization Technologies for High-Temperature Process Heating in Steel Manufacturing: The Role of Coolbrook's Rotodynamic Technology
Armin Paar
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Alejandro Pachon (Arcerlormittal)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Georg Padberg (SMS group)
- Author in Heavy plate applications ensure energy transition – Modern plant concepts for forward looking plate production
- Author in The art of keeping up with latest hot strip mill technology – upgrade success stories
Padma Pal (Tata steel limited)
- Co-author in Breaking boundaries: Tata Steel's H Blast Furnace sets new standards
Andrea Palma (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Enhancing rail performances: the Danieli RH2 - Rail Head Hardening process
Parizat Pandey
- Author in Circored as a Pre-Reduction Step for Low-Grade Iron Ores
Stefano Pantarotto (Marcegaglia Steel SpA)
- Author in AI-Powered Classification and Prediction of Process Defaults in Steel Manufacturing
Katia Papalia (SMS group)
- Author in The impact of DRI ratio and quality on EAF operational and metallurgical performances
- Co-author in Decarbonization of industrial high-temperature processes with an innovative Electric Gas Heating
Andrea Parimbelli (Acciaierie di Calvisano S.p.a. Feralpi Group - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
JOO HYUN PARK (Hanyang University)
- Author in Physicochemical properties of electric steelmaking slags for the mitigation of CO2 emissions: Active use of HBI with various intrinsic carbon
- Co-author in Effect of Bottom-Blowing on Nitrogen Removal Kinetics in Electric Arc Furnace (EAF) Conditions
- Co-author in Effect of Magnesium Deoxidation on Non-Metallic Inclusions in Austenitic Stainless Steel
- Co-author in Evolution Behavior of Non-Metallic Inclusions in Al-killed Ti-bearing Ferritic Stainless Steel
Jeongjun Park (POSCO)
- Co-author in Investigations on hearth refractory and skull
YOUNGJOO PARK (HYUNDAI STEEL)
- Co-author in The effect of hot heel condition on EAF operations with HBI bucket charging
SUNGJIN PARK (POSCO)
- Author in Evolution Behavior of Non-Metallic Inclusions in Al-killed Ti-bearing Ferritic Stainless Steel
TAE JUN PARK (Hyundai-steel)
- Author in Development of Monitoring System Using Vision Technology for Surface Quality of Steel Plate During Heat Treatment
Juan Jose Pascual Gonzalez (ArcelorMittal)
- Co-author in Advancing Mold Monitoring by Integrating Thermal Analysis and Material Insights with respect to the hot crack susceptibility
Krzysztof Pastucha (Primetals Technologies)
- Co-author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
Michael Pastula (FuelCell Energy Inc.)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Francesco Paternoster (SMS group)
- Co-author in From Quantity to Quality: Evolving Wire Rod Production to Meet Modern Market Demands with SMS group
Fabrice Patisson (University of Lorraine, Institut Jean Lamour)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Martin Pavlis
- Author in Advanced Dolime Injection Techniques for Enhanced EAF Steelmaking: Insights from a New Collaborative Trial by Lhoist and IntecoPTI
Mohamad bagher Pejman
- Author in CDRI preheating system by off-gas heat recovery for charging into EAF
- Author in Towards Smarter EAF Steelmaking: AI-Powered Slag Optimization with Real-Time Process Adaptation
Massimo Pellizzari (University of Trento, Dpt. Industrial Engineering)
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Yan Peng (Yanshan university)
- Co-author in Multi-functional Simulation System for Continuous Hot Bar Rolling: Development and Industrial Application
Yan Peng (National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao, 066004, China)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
AUGUSTO PEREIRA DE SÁ (VALE SA)
- Author in Sodium silicate impacts on blast furnace operation.
Mattia Perin (Università di Padova)
- Author in Optimization of Process Control and Energy Consumption in Hot Flat Ring Rolling Using Interactive Real-Time Software
Simona Pernice (Rina Consulting - CSM)
- Author in Alternative Annealing Process for NGO Electrical Steels Using Hydrogen Combustion: A Comparative Study
Fabian Perret (Hüttenwerke Krupp Mannesmann GmbH)
- Author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
eric perrin (LHOIST Innovation)
- Author in Filter cake by-product from pickling line transformation into a valuable product to recover the metallcs for EAF steelmaking process.
Livia Persico
- Co-author in Green Hydrogen in Cogne
Francis Perton (UGITECH)
- Co-author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Pasi Pesonen
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Marko Petajajarvi (Outokumpu Stainless Oy)
- Author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Rosa Peter (Hüttenwerke Krupp Mannesmann GmbH)
- Co-author in Comparison of laboratory tests and HKM blast furnaces on the reduction and carburisation behaviour of burden materials under coke gas injection
Jonas Petersson (Swerim AB)
- Author in Sensor solutions for online analysis of post-consumer scrap
Alice Petrucciani
- Author in Application of Deep Learning technique to improve the scrap quality
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Lukas Petzold (Primetals Technologies Linz GmbH)
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
Anrea Pezza (Badische Stahl-Engineering)
- Author in Secondary metallurgy challenges in the transformation from oxygen to electric steelmaking
Niccolò Pezzati (Re-Cord)
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
Christian Pfeifer (SMS group)
- Co-author in Superior product change control at cold rolling mills for enhanced productivity
Andreas Pfeiffer
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
- Co-author in Smelter technology to close the raw material gap in green steel production routes
Adam Pickford (Lhoist UK)
- Co-author in Filter cake by-product from pickling line transformation into a valuable product to recover the metallcs for EAF steelmaking process.
Robert Pierer (qoncept technology GmbH)
- Co-author in Melt Shop Production Management with Comprehensive Raw Material Optimization
Jean-Christophe Pierret (CRM Group)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Costanzo Pietrosanti (Danieli Automation S.p.A.)
- Author in Application of Deep Learning technique to improve the scrap quality
Roland Pietruck (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
Mirko Pigato (University of Padova)
- Co-author in Optimization of Fe-Mn-Al-C low-density steels for forging application
Felipe Pimenta (Vale S.A.)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Marco Pintus (Astarte Strategies Srl)
- Author in Simulation-driven comparison and investment prioritization of gas-fired and electric radiant tubes in galvanizing furnaces.
Thomas Piontek (VDEh-Betriebsforschungsinstitut GmbH)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Emmanuel Placier (AMI)
- Co-author in SmartKnB: Artificial Intelligence tools for EAF Optimization
Leonardo Plazzi (Arcelormittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Leonardo Plazzi (Arcelormittal Tubarão)
- Co-author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Adrian Plieth
- Author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Tom Plikas (Hatch Ltd.)
- Co-author in Technical Considerations in the Design of Capture Systems to Control Fugitive Releases in Ironmaking and Steelmaking
Uwe Plociennik (SMS group)
- Author in X-Pact® Solid Control – process optimization, quality control and root cause analysis in case of abnormalities in the cast product
Annalisa Pola (Università degli studi di Brescia - Italy)
- Co-author in The effect of continuous casting conditions on the mechanical properties of low-carbon steel wire rods
Massimo Poletto (University of Salerno - Department of Industrial Engineering)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Lukasz Poloczek (L-GIT)
- Author in Modular hybrid technology in the steel plant production
Giovanni Pongiglione (SMS group)
- Co-author in Revolutionizing Blast Furnace Stockhouses: Reducing Degradation and Enhancing Performance
Heinz-Josef Ponten (PSI Software SE)
- Co-author in Melt Shop Production Management with Comprehensive Raw Material Optimization
- Co-author in Transparent Online Calculation of Product Carbon Footprint in Steel Industry
Zeinab Poorzal
- Co-author in New generation of Admite rolls using in Finishing Stans of section mils
Rudolf Popp (SMS group)
- Co-author in Advanced Load Sharing Control for Roller Straightening of Long Products
Gernot Pottlacher (Institute of Experimental Physics, Graz University of Technology, NAWI Graz)
- Co-author in Thermophysical property measurement of selected Nickel based superalloys by voestalpine BÖHLER Edelstahl GmbH & Co KG using a gas-tight Furnace Rheometer System and an Electromagnetic Levitation Apparatus
Hedda Pousette
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Matthew Powell (Badische Stahl-Engineering)
- Author in Secondary metallurgy challenges in the transformation from oxygen to electric steelmaking
Nikolaus Preisser (CDL-IMAS, Montanuniversität Leoben)
- Author in Comparison of methods for modification of oxidic non-metallic inclusions using alkali elements on a laboratory scale
Peter Presoly (Montanuniversität Leoben)
- Author in High temperature oxidation in steel processing under different process conditions, atmospheres and rising levels on tramp elements
- Co-author in Influence of the cooling strategy on the intergranular crack formation during continuous casting of TRIP steels produced from low-grade scrap
- Co-author in The Impact of Cu, Sn, and Ni on Surface Cracking in Continuous Casting
Barbara Previtali (Politecnico di Milano)
- Co-author in Laser Cutting of Key Metals in the Construction Industry
Harsh Priyadarshi (ArcelorMittal Maizières Research SA)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Boris Prokofyev (KALUGIN JSC)
- Co-author in Different Options of Stove Modernization using Innovative Top Combustion Stove of Kalugin Design
Klaus Pronold (SMS group)
- Co-author in Integrating Centerline and Wedge Control: A Comprehensive Approach to Enhancing Strip Stability, Precision, and Product Quality
- Co-author in Superior product change control at cold rolling mills for enhanced productivity
Jonas Prudente (Dillinger)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Samuel Pucher (K1Met GmbH)
- Co-author in A blast furnace tapping simulator to better understand dead man flotation scenarios
Thomas Pursche (SMS group)
- Author in Improvement of Breakout Prevention for startup stability enhancement in high productivity thin slab casters
- Co-author in Case study on the improved reliability and efficiency of the HD moldFO+ fiber optic mold monitoring system
Christopher Pust
- Co-author in Optimizing DRI Production with Lime-Based Coatings Agents
Stefan Puttinger (Johannes Kepler University Linz)
- Author in A blast furnace tapping simulator to better understand dead man flotation scenarios
Tong Qiao (State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing)
- Author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
Cameron Quick (K1-MET GmbH)
- Author in Challenges and solutions for process characterisation of hydrogen plasma smelting reduction (HPSR) at pilot scale and beyond.
Milad Rahimian
- Co-author in CDRI preheating system by off-gas heat recovery for charging into EAF
Moksadur Rahman (ABB)
- Author in Electrification of High Temperature Heating Demand: A Techno-Economic Perspective on Decarbonized Steel Making
Ahmad Rajabi (BFI)
- Author in Performance of AI Oriented Contrastive Learning vs Convolutional Neural Networks (CNNs) in Quality Assessment of Zinc Coating Steel Coils
Pavel E Ramirez Lopez (SWERIM AB)
- Co-author in A novel approach to cracking criteria in continuous casting
- Co-author in THE PIVOT ROLE OF MODELLING IN PROBLEM-SOLVING ISSUES IN CONTINUOUS CASTING OF STEEL: A PROJECT CLUSTERING EXPERIENCE IN THE EUROPEAN PROGRAMMES FRAME
Natalia Ramos Goncalves
- Author in Hydrogen direct reduction of iron ores: effect of agglomeration
Franz Ramstorfer (Ternium Brasil)
- Co-author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
Alex Ratz
- Co-author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
Martin Raulf (ThyssenKrupp Steel Europe AG)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Michael Raus (SMS group)
- Co-author in Seamless Quality Management in the Transition to Energy-Efficient Steel Production
Kevin Rave (SMS group)
- Co-author in Advanced fluid flow simulation for the RH process
Shamik Ray (Stelco)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Francisco Javier REAL SALAS (CIRCE)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Delphine Reche (VDEH-Betriebsforschungsinstitut)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Nicola Redolfi (SMS group)
- Author in From Quantity to Quality: Evolving Wire Rod Production to Meet Modern Market Demands with SMS group
Heiko Reichel (SMS group)
- Co-author in The art of keeping up with latest hot strip mill technology – upgrade success stories
Erik Reichelt
- Co-author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
Alexander Reinicke
- Co-author in Experimental evaluation of a flexible natural gas and hydrogen burner in the electric arc furnace
Maximilian Reiter (Eisenwerk Sulzau-Werfen R. & E. Weinberger AG)
- Author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Wolfgang Reiter
- Author in Zinc flexible RecoDust process
Alexander Reiter (Primetals Technologies Austria GmbH)
- Author in Crafted Scrap: Scrap Yard Automation and Advanced Sensors
Davide Ressegotti
- Author in Problem solving with modeling support: evaluation with a numerical fluid dynamic model of the different configurations of the slag-cutting deflector for oxygen jet lance tips in the BOF
- Co-author in Production of hydrogen-rich synthesis gas for blast furnace injection by exploiting coke breeze combustion to reform coke oven gas.
Ralf Rettig (Thermo-Calc Software AB)
- Co-author in CALPHAD-based Thermodynamic and Kinetic Simulation of Secondary Steelmaking with Focus on Inclusion Formation and Modification
Jon Reyes Rodriguez (2ArcelorMittal Basque Country Research Centre AIE)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Flavio Ricchini (ECOTRE Valente srl)
- Co-author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Sebastian Richard (SMS group)
- Author in Advancements in Genius CM® Chatter: Enhancing Chatter root cause detection and vibration management at BRS PLTCM
- Co-author in X-Pact® Total Roll Gap Control (TRC®): Improvement of yield and reduction of non-productive time at CCM® Marcegaglia
Silvia Richter (Central Facility for Electron Microscopy, RWTH Aachen)
- Co-author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Marcus Rickers (ThyssenKrupp Rasselstein)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Dirk Riedinger (Badische Stahl-Engineering GmbH)
- Author in Improved EAF performance by optimized high current system design
Johannes Rieger (K1-MET GmbH)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Co-author in Sensor solutions for online analysis of post-consumer scrap
Bart Riems (ArcelorMittal Belgium)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Johan Riesbeck
- Author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Konstantinos Rigas
- Author in Sustainable Carbon Solutions for CO2 Mitigation in the Metallurgical Industry
Axel Rimnac (Primetals Technologies Austria GmbH)
- Co-author in High End Steel Grade Production with Advanced Cooling Technologies - possibilities for AHSS
Valerie Rinaldi (AM Belval)
- Co-author in Mould design optimisation for beam blank production
bernhard rischka (Swiss Steel Group)
- Co-author in Green Steel strategy and circular economy at Swiss Steel Group
Gaëtan Riviere (CRM Group)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Agostino Rizzo (Elind Italy)
- Author in Design and advantages of a hybrid furnace combining gas burners and induction heating
Sebastiano Rizzo (TN ITALY, Central Laboratory)
- Co-author in Enhancing 100Cr6 Steel Surface Performance with Thermally Sprayed Alumina: Mechanical, Electrical, and Tribological Evaluation
Justin Robertson (Big River Steel)
- Co-author in Advancements in Genius CM® Chatter: Enhancing Chatter root cause detection and vibration management at BRS PLTCM
Ian Robinson (Primetals Technologies Ltd)
- Author in The application of bar cooling technology to plate mills for throughput and utilization improvements
FABIO ROCHA DA SILVA (VALE SA)
- Author in Sodium silicate impacts on blast furnace operation.
Sébastien Roche (Fives Keods)
- Co-author in Case study on product quality management on a continuous galvanizing line thanks to digital solution
Érica Rodrigues
- Author in Comparative mineralogical characteristics of different Iron Ores
Filipe Rodrigues (TMT Luxembourg)
- Author in Key measurement technologies for direct reduction ironmaking
Sergio Rodriguez (Transvalor SA)
- Author in Finite Element Thermo-Mechanical Modeling of Continuous Casting: Simultaneous In-Mould Solidification and Mould Condition Analysis for High-Speed Billet Casting with Danieli’s Power Mould™
Tamara Rodriguez Duran (Sidenor I+D, Bilbao, Spain)
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
Bryan Ramiro Rodriguez-Vargas (University of Perugia)
- Co-author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Hans Roelofs (Steeltec AG)
- Author in Boron alloyed free cutting steel: a new candidate for Pb steel substitution
Marian Rogge (IMS Messsysteme GmbH)
- Author in New Optical Flatness Measurement by Magnetic Deflection
Andy Rohe
- Co-author in New, future ready production network for non grain oriented electrical steel
Andreas Rohrhofer
- Author in Transforming Steelmaking: Advanced Automation Solutions Powering the Twin Transition
Denis Romagnoli (STS srl)
- Author in Modification of Diamond Like Carbon (DLC) to improve specific tribological characteristics for automotive steel components
Matteo Carmelo Romano (Department of Energy, Politecnico di Milano)
- Author in Techno-Economic Assessment of H₂-DRI and NG-DRI-CCS Processes for Low-Emission Iron Production
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
Matteo C. Romano (Politecnico di Milano)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Giuseppe Andrea Romeo
- Co-author in Green Hydrogen in Cogne
Riccardo Rosati (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Christian Rose (University of California, Irvine)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Rebecca Rosén (KTH)
- Author in Replacement of Conventional Gas Burners with Electrical Resistive Heating for Tundish processes: A Sustainable Approach within the CITADEL Project
Federico Rossi (Scuola Superiore Sant'Anna)
- Author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
Roman Rössler (voestalpine Stahl GmbH)
- Co-author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
Susanne Rostmark (LKAB)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Jafet Roth
- Co-author in Experimental and model-based investigations on the influence of iron ore properties on hydrogen-based direct reduction kinetics.
Tatiana Rozhkova (ArcelorMittal Maizières Research)
- Co-author in Bio-char production and usage for iron ore pelletization
David Rudge (Hatch Ltd)
- Co-author in Electric Smelting Furnace Technology for Green Steelmaking
Kristin Rudolf (Theo Steil GmbH)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Elmar Rueckert (Montanuniversitaet Leoben)
- Co-author in Machine learning model for mould powder consumption in continuous steel casting
Benjamin Ruf
- Author in Safe Tundish Drain with Residual Steel Detection (RSD) for Maximized Yield and Process Optimization
Philippe Russo (ArcelorMittal Maizières Research SA)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Stephanie Rüstig
- Co-author in Flexible direct reduction of iron ore with Natural Gas and Hydrogen - Potential and perspectives of the new SALCOS demonstration plant µDRAL in Salzgitter
ION RUSU (POLYTEC SPA)
- Author in A customizable robotic for maintaining the ladle sliding gate
- Author in Advanced robotic system for automated plate processing: precision, efficiency, and seamless integration
- Author in Enhancing quality control for Long Products with robotics and computer vision
- Author in Human-free casting operation. Safety and efficiency increase thanks to robotization and artificial vision
- Author in Safer Electric Melting: How robotics is transforming the EAF steel production
- Author in Smart robotic system for scrap sorting
Mohamad Sabsabi (National Research Council of Canada)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Afshin Sadri (Hatch Global Director of Non-Destructive Testing (NDT) Group)
- Author in Development of a Handheld Low-Frequency Ultrasonic System for Precise Stave Wear Measurement in Blast Furnaces
Mohamed Safa
- Author in Optimisation of CSP hot rolled structured steels based on Nb micro-alloying to reduce costs and GWP
Jafar Safarian
- Co-author in Carburization with methane of different iron-bearing oxide pellets reduced by hydrogen
- Co-author in Green Manganese steel from remelting of hydrogen based Direct Reduced Iron (DRI) and green Ferroalloy: a CO2 free approach
- Co-author in Hydrogen Reduction of Manganese and Iron Oxides in a Commercial Manganese Ore: Thermochemistry and Kinetics
Cem Sahin (thyssenkrupp Steel Europe AG)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Doruk Sahinel (Spherity GmbH)
- Author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Eugenia SAINSUS (RINA-Consulting CSM)
- Author in Replacing natural gas with Hydrogen in heat treatment furnaces: impact on scale formation, surface quality and pickling kinetics of stainless steel
Hiroshi Sakai
- Co-author in Development of Degradation Model for Sinter Ore Considering Particle Size Distribution
Eric Sako (Shinagawa Refratários do Brasil)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Elisa Salamone (Danieli Centro Combustion S.p.A.)
- Author in Innovative “Scale Free” Furnace for section rolling mill
Iraj Salehi Arashloo
- Co-author in Towards Smarter EAF Steelmaking: AI-Powered Slag Optimization with Real-Time Process Adaptation
Andrea Salimbeni (CONSORZIO PER LA RICERCA E LA DIMOSTRAZIONE SULLE ENERGIE (Re-Cord))
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
Andrea Salimbeni (Re-Cord)
- Author in Application of a novel biowaste-derived biocoal as coal substitute in Electric Arc Furnace
M. Salonna (Politecnico di Milano)
- Co-author in Microstructural optimization and mechanical behavior of SS-QP treated 30CrNiMo8 steel
Stefano Salvagno (FERALPI SIDERURGICA)
- Author in Modular hybrid technology in the steel plant production
Ilaria Salvatori (Rina Consulting- Centro Sviluppo Materiali)
- Author in Modular hybrid technology in the steel plant production
Sina Samimi Sedeh (FerrTech)
- Author in FerSol, the new three-in-one water treatment chemical
Bernhard Sammer (Christian Doppler Labortatory for Inclusion Metallurgy in Advanced Steelmaking)
- Author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
Steven Samuel (Hatch)
- Author in Campaign Life Extension of Hot Stoves in Blast Furnace Ironmaking
Peter Samuelsson (KTH)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Stephane Sanchez (ArcelorMittal Belval-Differdange)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Mathieu Sanchez
- Author in Direct Feed Power Supply to enhance power quality and EAF KPI
Erik Sandberg (Swerim AB)
- Author in Efficiency of bio-carbon as slag reduction and slag foaming agent in EAF
- Co-author in Effects of H2 as energy source and biocarbon injection in EAF
Begoña Santillana (Dr. Ir.)
- Co-author in A novel approach to cracking criteria in continuous casting
Niklas Sarius (SealEco International)
- Co-author in Effect of carbon content (0.61 to 0.99 wt.%) on bainite transformation kinetics, structure and tempering resistance in low alloy steel
Alok Sarkar (Norwegian University of Science and Technology (NTNU), Norway)
- Author in Hydrogen Reduction of Manganese and Iron Oxides in a Commercial Manganese Ore: Thermochemistry and Kinetics
Yasushi Sasaki (New Industry Creation Hatchery Center, Tohoku University, Japan)
- Co-author in Effect of gas volume expansion on carbothermic reaction of phosphoric acid to produce white phosphorus
Marco Sassoli (Tenova SpA)
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Filipe Sathler (Arcelormittal Tubarão)
- Co-author in HIGH PELLET RATES IN ARCELORMITTAL TUBARÃO BLAST FURNACE 3
Filipe Sathler (Arcelormittal Tubarão)
- Co-author in Evaluation of Hot Briquetted Iron (HBI) in Blast Furnace 2 at ArcelorMittal Tubarão: Impact on Productivity, Fuel Rates, and Decarbonization
Haruka Sato (Tohoku University)
- Author in Production conditions of porous iron whisker for the gas reforming in CRIP-D ironmaking process
Henrik Saxén (Åbo Akademi University)
- Co-author in Implementation of EASyMelt with Ammonia and HBI Charging to Achieve Ultra Low Carbon Ironmaking
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Henrik Saxén (Åbo Akademi University)
- Author in Computational Analysis of Means to Enhance Hydrogen-Based Direct Reduction in Shaft Furnaces
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Roberto Scaccabarozzi (Laboratorio Energia & Ambiente Piacenza)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Roberto Scaccabarozzi (Laboratorio Energia & Ambiente Piacenza (LEAP))
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
Alberto Scarmi (SEW-EURODRIVE)
- Author in Advantages of manufacturer expertise and machine self-learning for effective predictive maintenance of industrial gearboxes
Michael Schäfer (SHS - Stahl-Holding-Saar GmbH)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Martin Schaler
- Author in Reducing blast furnace CO2 emissions
- Author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
- Author in The Pathway to Autonomous Ironmaking
Magdalena Schatzl (Team Lead in Area 3)
- Co-author in Advancing Hydrogen Plasma Smelting Reduction: Process Simulation and technical and environmental assessment
Johannes Schenk (Montanuniversitaet Leoben)
- Author in Comparative Analysis of CO and H2 Reduction Mechanisms in Electric Arc Furnace Dust
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
Viktor Scherer (Ruhr-Universität Bochum, Lehrstuhl für Energieanlagen und Energieprozesstechnik)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
ROBIN SCHIFFLER (Friedrich KOCKS GmbH CO KG)
- Co-author in Innovative Rolling Mill for Seamless Structural Hollow Sections - The legacy of MSH profiles continues
Wolfgang Schindlbacher (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Mould design optimisation for beam blank production
Wolfgang Schindlbacher (INTECO melting & casting technologies GmbH, Austria)
- Co-author in Electromechanical servo drive for mold level control: performance and evolution
Christoph Schirm (Thyssenkrupp Rasselstein)
- Author in Demonstration of XR experience via Hands-On Session
- Author in DynReAct – An open-source production planning software
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Martin Schlautmann (PSI Software SE)
- Author in Melt Shop Production Management with Comprehensive Raw Material Optimization
- Author in Transparent Online Calculation of Product Carbon Footprint in Steel Industry
Nina Schlemmer (K1-MET GmbH)
- Author in Electrical conductivity modelling of molten slag based on viscosity data - A mechanistic approach
Martin Schlupp (ThyssenKrupp Rasselstein)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Rolf Schmidt (VantageAlloys AG)
- Co-author in Plasma Nitriding of Vanadium-Alloyed Air-Hardening Ductile Steels
Lukas Schmidt
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Marvin Schmidt (TMT Luxembourg)
- Co-author in Key measurement technologies for direct reduction ironmaking
Rolf Schmidt (Vantage Alloys AG)
- Co-author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Matthias Schmidtchen (TU Bergakademie Freiberg, Institut for Metal Forming)
- Author in Modular hybrid technology in the steel plant production
Nico Schmitz (Department for Industrial Furnaces and Heat Engineering / RWTH Aachen University)
- Co-author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
Peter Schmitz (SMS group)
- Co-author in Heavy plate applications ensure energy transition – Modern plant concepts for forward looking plate production
Guenther Schnell (Friedrich Kocks GmbH & Co KG)
- Author in SBQ Sizing - Free of charge
Fabian Schongen
- Author in New, future ready production network for non grain oriented electrical steel
Daniel Schubert (thyssenkrupp Steel Europe AG)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
Lilly Schulte
- Author in Experimental evaluation of a flexible natural gas and hydrogen burner in the electric arc furnace
Martin Schuster (Primetals Technologies Austria)
- Co-author in Advanced Instrumentation and Holistic Process Improvement in Continuous Casting at Outokumpu Tornio
Kevin Schwarzinger (Primetals)
- Co-author in Secondary Cooling Heat Transfer Measurements on a New Test Rig
Jakob Schwarzmann (IMS Messsysteme GmbH)
- Co-author in New Optical Flatness Measurement by Magnetic Deflection
Thomas Schweiker (Mercedes-Benz AG)
- Co-author in On the influence of EAF based steelmaking on AHSS
Sara Scolari (Politecnico di Milano - Dipartimento di Meccanica)
- Author in Design of a sustainable iron ore smelting system using biochar-based direct reduction and CO₂ sequestration to lower steel’s carbon footprint in Marcegaglia site at Ravenna port
- Co-author in Clean iron production by self-reducing agglomerates made in biochar and mill scale: a comparison in reduction efficiency as a function of biochar quality and properties
Graeme Scott (ArcelorMittal Dofasco)
- Co-author in Bio-char production and usage for iron ore pelletization
Iman Sedighi (Institute of Materials Science, Joining and Forming at the Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria)
- Co-author in Influence of different C, Ti, B, Mn, and Al content on hot ductility behavior of two micro-alloyed steel at different strain rates
Mohammad Sedighy (Hatch Ltd)
- Author in Next Generation Power Supply Options for Electric Arc Furnaces and Electric Smelting Furnaces
PETER SEEMANN (Ebner Group)
- Author in Next generation of sustainable HICON/H2® bell-type furnace systems
Gagandeep Sehgal (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Monika Seidl (K1-MET GmbH und Montanuniversität Leoben)
- Author in Hybrid solution for local heat transfer coefficients in a transient solidification model for continuous casting
Alois Seilinger
- Co-author in Hot strip surface quality improvements by: Work roll lubrication and cooling package for hot strip mills with a new special feature for a continuous lubrication
Takeshi Sekiguchi
- Author in The groundbreaking concept of Carbon Neutral blast furnace, called SimpLE
Christian Senes (Acciaierie di Calvisano)
- Author in New techniques for improvement of the monitoring and conditioning of slag in EAF steelmaking for the optimization of steel treatment and slag recovery
Stefan Senge
- Author in CFD and FEM study on redesigning the mould geometry of the thin slab caster of Tata Steel in IJmuiden for enhanced casting performance
Byeongrak Seo (IngenioAI)
- Co-author in Deep Learning Model to Predict the Remaining Time to Close Tap-holes for Blast Furnaces
Seok Seo (Expresslab Inc.)
- Co-author in Analysis of Center Segregation Induced by Density Changes and Shrinkage Cavities Using a Moving-Slice Model in Continuous Casting
Claudia Sergi (RINA Centro sviluppo Materiali)
- Author in Kinetics of Direct Reduction of iron ore pellets: understanding rate-limiting steps in hydrogen-based reduction of low- and high-grade pellets
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Lillian Serra de Mello
- Co-author in Comparative mineralogical characteristics of different Iron Ores
Raffaella Sesana (DIMEAS, Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin)
- Co-author in Enhancing 100Cr6 Steel Surface Performance with Thermally Sprayed Alumina: Mechanical, Electrical, and Tribological Evaluation
Bijan Shahriari (Hatch)
- Author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Lei Shao (Northeastern University)
- Author in Computational Analysis of Means to Enhance Hydrogen-Based Direct Reduction in Shaft Furnaces
Saham Sadat Sharifi (Technical University of Graz)
- Co-author in Influence of different C, Ti, B, Mn, and Al content on hot ductility behavior of two micro-alloyed steel at different strain rates
Richard Sharp (Evertz Europe S.A.)
- Author in AI-BASED SURFACE INSPECTION AND 3D PROFILING FOR QUALITY ASSURANCE IN STEEL PRODUCT GRINDING
NAZANIN SHEIBANIAN (1. DIMEAS, Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin / 2.TN ITALY, Central Laboratory, Corso Torino 378, 10064 Pinerolo, Italy)
- Author in Enhancing 100Cr6 Steel Surface Performance with Thermally Sprayed Alumina: Mechanical, Electrical, and Tribological Evaluation
Adel Sheikhhosseini (Behin Industrial Group)
- Author in New generation of Admite rolls using in Finishing Stans of section mils
- Author in The Effect of Ferrovanadium as an Inoculant Using in HSS Rolls using in light section mills
- Author in The investigation on generating a new sleeve grade using in initial stand of Rebar rolling Danieli mills for improving fracture toughness of coupling
Minsoo Shin (POSCO)
- Co-author in Investigations on hearth refractory and skull
Hyeonwoo Shin (Dong-A University)
- Author in Effect of slag conditions on the wetting behavior between blast furnace slag and cokes
DAEHOON SHIN (HYUNDAI STEEL)
- Co-author in Development of Oxygen-fuel Burner Design for Electric Arc Furnaces under Supersonic Flow Conditions
- Co-author in The effect of hot heel condition on EAF operations with HBI bucket charging
Stephen (Mark) Shore
- Author in Advanced Long Rolling Solutions for Efficient Stainless-Steel Production
Eleonora Shpilevaia
- Author in Comparative Analysis of CO and H2 Reduction Mechanisms in Electric Arc Furnace Dust
Evgenii Shvydkii (MAGMA Gießereitechnologie GmbH)
- Author in CC Process optimization through combined digital twin and in-line measurement technology for a stainless-steel slab production
- Co-author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Andrey Stephan Siahaan (New Industry Creation Hatchery Center, Tohoku University, Japan)
- Author in Effect of gas volume expansion on carbothermic reaction of phosphoric acid to produce white phosphorus
Geraldine Siboni (ArcelorMittal research)
- Co-author in Influence of the mineral gangue on pellets softening melting properties in Blast Furnace. Experimental study of phase equilibria during the melting of pre-reduced pellets
Arslan Siddique (Scuola Superiore Sant'Anna)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
- Author in Application of Deep Learning technique to improve the scrap quality
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
Jörn Sieghart (SMS group)
- Author in Superior product change control at cold rolling mills for enhanced productivity
- Co-author in X-Pact® Total Roll Gap Control (TRC®): Improvement of yield and reduction of non-productive time at CCM® Marcegaglia
Christof Sihler
- Author in Direct Feed Power Supply to enhance power quality and EAF KPI
Andrea Silenzi (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Bianca Silva (Shinagawa Refratários do Brasil)
- Author in Cold Agglomerated Iron Ore Briquettes for Blast Furnace: Refractory Performance of Runner and Mud Gun
Daniel Sipos
- Co-author in Low Carbon Footprint EAF Refractories to support Scope 3 emissions reduction and the overall European green steel transformation
Alessandro Siri (SMS group)
- Author in Revolutionizing Blast Furnace Stockhouses: Reducing Degradation and Enhancing Performance
Erwin Sirovnik (Thyssenkrupp Rasselstein)
- Author in DynReAct – An open-source production planning software
- Author in Exploring capabilities of an auction-based multiagent system in real-time reactive scheduling
Stephan Six (SMS group)
- Author in Case study on the improved reliability and efficiency of the HD moldFO+ fiber optic mold monitoring system
Jakob Six (voestalpine Stahl GmbH)
- Co-author in Continuous Casting Mold Flow with Original and Used Nozzle Geometries: Numerical Flow Simulations and Water Model Measurements
Adam Skowronek (Silesian University of Technology)
- Author in Designing thermomechanical processing schedules for Mo- and Cu-containing quenching and partitioning medium-Mn steels for multiphase forgings
Will Smailes (SARCLAD)
- Author in ON-LINE STEEL SURFACE CONTAMINATION MONITORING WITH LIBS-BASED SENSOR
Julien Smal (CRM Group)
- Co-author in High Turbulence Pickling
Phil Smales
- Co-author in Filter cake by-product from pickling line transformation into a valuable product to recover the metallcs for EAF steelmaking process.
Bas Smeulders (Quaker Houghton BV)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
Delphine Snaet (European Steel Technology Platform)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
Elton Soares de Lima Filho (National Research Council of Canada)
- Co-author in Industrial Implementation of PyroLIBS for Continuous Hot Metal Chemistry Measurement
Kamila Soares do Espírito Santo
- Co-author in Comparative mineralogical characteristics of different Iron Ores
Chiara Soffritti (Department of Engineering, University of Ferrara)
- Author in A combined experimental–numerical approach to assess the effects of quenching transfer time on the microstructure and mechanical properties of a Ti-6Al-4V alloy
Davide Soletto
- Author in INNOVATIVE APPROACH IN STEELMAKING REFRACTORY APPLICATIONS
Cameron Soltys (Hatch)
- Co-author in Campaign Life Extension of Hot Stoves in Blast Furnace Ironmaking
Christof Sommitsch (Graz University of Technology)
- Co-author in Influence of different C, Ti, B, Mn, and Al content on hot ductility behavior of two micro-alloyed steel at different strain rates
XingQiang Song (Swerim AB)
- Author in Sustainable biogenic carbon for metallurgical use
Gilho Song (POSCO)
- Co-author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
Youngsik Song (POSCO)
- Co-author in Development of an AI model to optimize cooling conditions for hot-rolled coils from the down coiler to the storage yard to minimize material properties deviations in high-strength steel
Guido Sonnenschein (SMS group)
- Author in Advanced Load Sharing Control for Roller Straightening of Long Products
Markus Sonnleitner (Voestalpine)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Robert Sorger
- Co-author in The interplay of SEN design and flow dynamics in thin and mid slab casting
Aintzane Soto Larzabal (Sidenor Aceros Especiales)
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
Thomas Sourisseau (UGITECH)
- Author in Predicting recrystallization phenomena with DIGIMU during hot-rolling of grade AISI 304L
Paulo Souza (RHI Magnesita)
- Co-author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
Gianpaolo Spagnolli (Cogne Acciai Speciali)
- Author in Development and application of measurement systems in forging process
Maurizio Spinelli (Laboratorio Energia & Ambiente Piacenza)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Maurizio Spinelli (Laboratorio Energia & Ambiente Piacenza (LEAP))
- Co-author in Flexible operation of DRI plants integrated with high-temperature electrolysis for cost-effective decarbonization of iron production
August Sprock (SMS group)
- Co-author in New insights from the online LUS grain size measurements
Patrick Stahl (MIRECO)
- Co-author in Green Steel Initiatives Supported by Enhanced Slag Engineering Using High-Alumina Circular Metallurgical Additives
Adam Ståhlkrantz (Swerim AB)
- Author in Effect of carbon content (0.61 to 0.99 wt.%) on bainite transformation kinetics, structure and tempering resistance in low alloy steel
Georges Stamatakis (SMS group)
- Author in Complexity of decision-making process through sensitivity analysis for decarbonization technologies
- Author in Transforming Underperforming Steel Plants into Industry Leaders Using State-of-the-art Sustainable Technologies
Laura Standardi (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Günther Staudinger (Danieli Corus)
- Author in Online Temperature and Deformation Measurement for Vessel Shell of Oxygen Steelmaking Converters
Clemens Staudinger
- Co-author in AI-Powered Cohesive Zone Optimization: Enhancing Efficiency and Stability in Blast Furnaces
Clemens Staudinger (voestalpine Stahl Linz)
- Co-author in A blast furnace tapping simulator to better understand dead man flotation scenarios
Thomas Stein (mecorad GmbH)
- Co-author in CC Process optimization through combined digital twin and in-line measurement technology for a stainless-steel slab production
Dietmar Steiner (Primetals Technologies)
- Co-author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
Thomas Steinparzer (Primetals Technologies Austria)
- Author in Optimized Control of an EAF off-gas system by Video Analysis
- Author in Transitioning to Green Steelmaking: Environmental Considerations of Electric Arc Furnaces
Alessandro Stenico (PSI Software SE)
- Author in Predictive-Prescriptive Quality Control in the Steel Industry: A Synergy of Human Knowledge, Machine Learning and Auto-mation Framework
Marvin Stenzel (Steeltec AG)
- Co-author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Stefan Stergianou (SMS group)
- Co-author in Advanced Ring Rolling Simulations with Embedded Machine Control Systems
Nadine Stevens (SMS group)
- Co-author in Technology Consulting Meets Operational Excellence to Improve Steelplants Operations
Anouk Stigter (Tata Steel Europe)
- Co-author in Transparent Online Calculation of Product Carbon Footprint in Steel Industry
Tom Stoakes (British Steel)
- Co-author in Cold Agglomerated Iron Ore Pellets Industrial Trial – High quality manufacturing and their performance in the Blast Furnace
Carsten Stöcker (Spherity GmbH)
- Co-author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Deborah Stockl Martins da Silva
- Co-author in Comparative mineralogical characteristics of different Iron Ores
Christophe STOCKY (ACM - ABS Centre Métallurgique)
- Co-author in Development of optimized continuous casting process for zero-defect round blooms production in high silicon 54SiCr6 automotive spring steel. Production trials in Acciaierie Bertoli Safau S.p.A.
Klaus Stohl
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Giulia Stornelli (University of Perugia)
- Co-author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Dean Stroud (School of Social Sciences, Cardiff University)
- Co-author in Navigating the Automation-Augmentation Paradox: Insights from AI Implementation in a Labor-Intensive Foundry
Georg Strüber (SMS group)
- Co-author in Optical Measurement of raw material particle size
Gerald Stubbe (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Upgrading of low-quality iron ores and mill scale with low carbon technologies
Jean-Francois Stumper (TMT Luxembourg)
- Co-author in Key measurement technologies for direct reduction ironmaking
Thomas Sturz (Hüttenwerke Krupp Mannesmann GmbH)
- Author in BOF operation with increased scrap rate for CO$_{2}$-reduction
Anton Subbotin (KALUGIN JSC)
- Co-author in Different Options of Stove Modernization using Innovative Top Combustion Stove of Kalugin Design
Dmitry Sukhomlinov
- Co-author in Experiences and lessons learned from Metso’s Outotec pilot DRI smelting tests
Mitren Sukhram (Hatch Ltd.)
- Author in Burden distribution modeling to diagnose blast furnace operations
Haider Sultan (Danieli Corus)
- Co-author in Blast Furnace CO2 Emissions: A Techno-Economic Assessment
Hans-Åke Sundberg (Husqvarna Group)
- Co-author in Effect of carbon content (0.61 to 0.99 wt.%) on bainite transformation kinetics, structure and tempering resistance in low alloy steel
Jill Sundberg (Swerim)
- Author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Hannu Suopajärvi (Sapotech Oy)
- Author in ADVANCING CONTINUOS CAST SEMI-PRODUCT QUALITY THROUGH A DIGITAL TWIN FRAMEWORK
- Author in AI-BASED SURFACE INSPECTION AND 3D PROFILING FOR QUALITY ASSURANCE IN STEEL PRODUCT GRINDING
- Author in Metallurgical Quality Assessment Of Continuous Casting Combining AI, Sensor Information and Machine Vision
Benjamin Suppan (CDL-IMAS, Montanuniversität Leoben)
- Co-author in Comparison of methods for modification of oxidic non-metallic inclusions using alkali elements on a laboratory scale
Jörg Surmund
- Author in Innovative Rolling Mill for Seamless Structural Hollow Sections - The legacy of MSH profiles continues
Anna-Maria Suup
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Nicole Sweeten (Hatch Ltd.)
- Co-author in Slag Modelling and Design Optimisation for Enhanced Performance in Electric Smelting Furnaces
Gaétan Symens (CRM Group)
- Author in On-line laser cleaning of skin pass rolls
Alicja Szemalikowska (Sieć Badawcza Łukasiewicz - Górnośląski Instutut Technologiczny)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
Arash Tahmasebi
- Co-author in Impact of iron source and binder type on the mechanical strength and microtexture of ferro-coke
- Co-author in Influence of HDPE addition on microstructure transformation during coking of Australian coking coals
Isao Takahashi
- Author in Control of Low Bulk Density Region around Briquette in Briquette Blending Carbonization Process
Kotaro Tanaka (Yamato steel)
- Co-author in Carbothermic reduction of hot rolling sludge by rice husk char with microwave heating
Yong Tang (RHI Magnesita)
- Co-author in The interplay of SEN design and flow dynamics in thin and mid slab casting
Sunrui Tao (National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao, 066004, China)
- Author in Prediction and controlling of strip buckling during industrial continuous annealing process
Christian Tauber
- Co-author in The Pathway to Autonomous Ironmaking
Andrea Taurino (SMS group)
- Co-author in From Quantity to Quality: Evolving Wire Rod Production to Meet Modern Market Demands with SMS group
Michele Tavassi (Rina Consulting - CSM)
- Author in Alternative Annealing Process for NGO Electrical Steels Using Hydrogen Combustion: A Comparative Study
Mattia Tellaroli (Feralpi)
- Author in Continuous improvement on process modelling in EAF steelmaking as support to process prediction and management
Mattia Tellaroli (FERALPI SIDERURGICA)
- Author in Developments of monitoring of Billets quality through modelling and new sensors in the frame of Sunshine project
Alfred Tenner (Kuhn Innovation GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Cristiano Tercelli
- Author in Green steel production through the Endless Bar Production process
Pascal Tessier (FuelCell Energy Inc.)
- Author in Results from the HySteel project: integration of solid oxide electrolysis into direct reduction iron systems
Francesco Testa (Sant'Anna School of Advanced Studies)
- Co-author in Navigating the Automation-Augmentation Paradox: Insights from AI Implementation in a Labor-Intensive Foundry
Christoph Thaler (voestalpine Stahl GmbH)
- Co-author in Zinc flexible RecoDust process
Alexander Thekale
- Co-author in From Data to benefit - application of AI technologies in steel production
Christian Thiede (SMS group)
- Author in Thick Slab Casting Technology for renewable energy produced by windmills
Jan Thiel (PSI SE Process Industries and Metals)
- Author in Local Area Production System
Arndt Thiele
- Author in Cu+: A New Standard in Slab Mould Plate Design for Cost-Effective Steel Production
Kathrin Thiele (Montanuniversitaet Leoben)
- Co-author in Evolution of non-metallic inclusions in non-oriented electrical steel: Industrial observations and laboratory test results
Ricky Thiermann (Spherity GmbH)
- Co-author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Marco Thomä
- Co-author in Digitalization of Material Properties Across the Entire Process Chain
- Co-author in Integrating CO₂ Reporting with Physically Consistent Material and Energy Flow Analysis to Improve Circularity of Steel Products
Brian G. Thomas (Colorado School of Mines)
- Author in Simulation of transient temperature and solidification evolution in a continuously cast slab using multiple transverse sections
Jan-Erik Thorberg (SSAB EMEA AB)
- Co-author in New insights from the online LUS grain size measurements
Zhiling Tian (The Chinese Society for Metals)
- Author in The Production Mix of Chinese Steel Industry and the Technical Efforts Toward Carbon Neutral
Nizar Tiraani (Vargön Alloys AB)
- Author in Innovative Approaches To Sustainable FeCr Production Through Biocarbon and H2 Utilization
Michiel Tjin-Asjoe
- Co-author in 150 tons revert-based briquettes produced and processed in a blast furnace
Tshubasa Tokunaga (Kyushu University, school of engineering)
- Author in Carbothermic reduction of hot rolling sludge by rice husk char with microwave heating
Rudy Tolkamp
- Author in Blast Furnace Hearth Relines From Concept to Construction
Jyri Tolonen
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Nicola Tomba (PERT srl)
- Author in PERT BS STAND APPLICATION IN A UPGRADE OF SECTION MILL – CASE HISTORY-
- Author in PERT GRINDING BALL ROLLING MILL
MATTEO TOMBA (PERT SRL)
- Author in FUME TREATMENT PLANT FOR A STEELMAKING FACILITY: OVERVIEW OF THE MAIN FACTORS THAT AFFECT THE FINAL CHOICE
- Author in ZERO IMPACT FOR WATER RESOURCES FOR A STEEL INDUSTRY COMPLEX
Lavinia Tonelli (Università di Bologna)
- Co-author in Applicability of a Ni-9%P+(a:C-H)DLC multilayer coating to improve the tribological behaviour of AISI 316L screws with internal channels produced by Powder Bed Fusion-Laser Beam
Andrea Tonin
- Co-author in Towards Green Steel: Challenges, Opportunities, and Strategies for Decarbonization
Tsuyoshi Tono (Sekisui Chemical Co., Ltd,)
- Co-author in Innovative CO2 to CO Conversion Technology for Carbon Neutrality with High Reaction Yield and Economic Efficiency
Andrea Tononi (FERALPI SIDERURGICA)
- Author in Modular hybrid technology in the steel plant production
Tristan Töpfer-Bergner (SMS group)
- Author in Transforming Steel Manufacturing: Innovations and Achievements in Direct Casting and Rolling
Federico Tortul (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Latest developments in MIDA technology
Orlando Toscanelli (Scuola Superiore Sant'Anna)
- Author in Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
Eric Tremblay (Metal7 Inc.)
- Co-author in Improving Direct Reduction Operation efficiency through Roller Screen technology
Thomas Trickl
- Co-author in Wear and oxidation behavior of cast high-speed steels used for work rolls in hot rolling mills
Achille Trisciuzzi (Danieli & C. Officine Meccaniche S.p.A.)
- Author in A LOOK AT DANIELI DCM'S STRATEGIC PLANT UPGRADES ACROSS ITALY
Marco Truant (Acciaierie Bertoli Safau)
- Co-author in Development of optimized continuous casting process for zero-defect round blooms production in high silicon 54SiCr6 automotive spring steel. Production trials in Acciaierie Bertoli Safau S.p.A.
paul trunner
- Author in Transitioning to Green Steelmaking: Environmental Considerations of Electric Arc Furnaces
Anastasya Tselikova (Vantage Alloys AG)
- Co-author in Role of Vanadium in welding of flat products in High-Strength Low-Alloy Steel: microstructure and mechanical properties
Christoph Turk (voestalpine Böhler Edelstahl GmbH & Co KG)
- Co-author in Thermophysical property measurement of selected Nickel based superalloys by voestalpine BÖHLER Edelstahl GmbH & Co KG using a gas-tight Furnace Rheometer System and an Electromagnetic Levitation Apparatus
Andrea Turolo (SMS group)
- Co-author in SMS ZERO2Flame HY2 burner for reheating furnaces
Angelo Uberti (Danieli & C. Officine Meccaniche S.p.A.)
- Author in ENERGY SAVING ON A 70 MN OPEN DIE FORGING PRESS
Paul Uhl-Hädicke
- Author in Bucket Loading and Scrap Yard Logistics Simulation - Optimizing Material Flow and Enhancing Efficiency
- Author in PREVENT BOTTLENECKS AND OPTIMIZE LADLE AND CRANE LOGISTICS FOR AN EAF-BOF MELT SHOP
Lucia Unamunzaga (Fundacion Azterlan)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Paulina Unifantowicz (Steeltec AG)
- Author in Boron alloyed free cutting steel: a new candidate for Pb steel substitution
Miroslav Urbánek (COMTES FHT a.s.)
- Co-author in Advanced Materials and Additive Manufacturing for Demanding Industrial Applications: Nickel-Based Alloys for High-Performance Forging Tools
Andrea Uva (TN ITALY, Central Laboratory)
- Co-author in Enhancing 100Cr6 Steel Surface Performance with Thermally Sprayed Alumina: Mechanical, Electrical, and Tribological Evaluation
SAHAR VAHTATIFAR
- Co-author in CDRI preheating system by off-gas heat recovery for charging into EAF
Ioannis Vaitsis (AEIFOROS)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Mario Valdes
- Author in INNOVATIVE APPROACH IN STEELMAKING REFRACTORY APPLICATIONS
Ismael Valdez (AMI)
- Author in SmartKnB: Artificial Intelligence tools for EAF Optimization
Ivars Valdmanis (SMS group)
- Co-author in Advancements in Genius CM® Chatter: Enhancing Chatter root cause detection and vibration management at BRS PLTCM
Majid Valehi
- Co-author in The Effect of Ferrovanadium as an Inoculant Using in HSS Rolls using in light section mills
Majid Valehi
- Co-author in The investigation on generating a new sleeve grade using in initial stand of Rebar rolling Danieli mills for improving fracture toughness of coupling
Lorenzo Valente (ECOTRE Valente srl)
- Co-author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Marko Valli
- Co-author in FILTRABIT-NEW INNOVATION TO INDUSTRIAL DUST EXTRACTION
Kimmo Vallo
- Co-author in Experiences and lessons learned from Metso’s Outotec pilot DRI smelting tests
Chiara Valzecchi (Alperia Green Future Srl)
- Author in AI-Based Optimization of Compressed Air Networks in Hard-to-Abate Industrial Sectors
Stefan Van Bohemen (Tata Steel)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Peter van den Broeke (Tata Steel Nederland)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Jan van der Stel (Tata Steel Nederland R&D)
- Co-author in Important aspects to optimise hydrogen enrichment in direct reduction
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Wim Van der Stricht (ArcelorMittal Belgium)
- Co-author in The SMART project : recycling of plastics and waste materials in TORERO to substitute more coal injection in the blast furnace
Frank van de Winkel (TOMRA Sorting GmbH)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Sebastiaan van Dorp (Calix)
- Co-author in Calix’s Zero Emissions Steel Technology (ZESTY): Breakthrough pilot testing results for the Hydrogen Direct Reduced Iron (H-DRI) process
Floris van Laar
- Author in Blast Furnace Hearth Relines From Concept to Construction
Reinoud Van Laar (Danieli Corus)
- Author in Blast Furnace CO2 Emissions: A Techno-Economic Assessment
Frederic van LOO (CRM Group)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Frederic VanLoo
- Co-author in Investigation of the reoxidation behaviour of HBI samples produced on a laboratory scale
Lorenzo Vannini (Scuola Superiore Sant'Anna - TeCIP Institute - ICT-COISP)
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Koos Van Putten (SMS group)
- Author in Advanced Ring Rolling Simulations with Embedded Machine Control Systems
- Co-author in Advanced Load Sharing Control for Roller Straightening of Long Products
Bart van Rookhuizen (Tata Steel Nederland Technology B.V.)
- Author in Investigation on the use of organic acids to pickle the oxide scale of carbon steel hot rolled strips
Marco Vanucci (Sant’Anna School of Advanced Studies | SSSA)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
- Author in Application of Deep Learning technique to improve the scrap quality
- Author in DynReAct – An open-source production planning software
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Towards zero-defect manufacturing for flat steel production - Introduction of the SurfConInspect Project
Aravind Senan Vasanthasenan Reji (KTH)
- Co-author in Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Armando Vazquez (Tenova Goodfellow Inc.)
- Author in Advanced EAF Optimization Strategies Using Intelligent Tenova Technologies
Fabio Vecchiet
- Co-author in Experimental evaluation of a flexible natural gas and hydrogen burner in the electric arc furnace
Noelia VEGA AGUIRRE (ArcelorMittal)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Hugo Teixeira Veiga
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Alessandro Venanzini (Danieli Centro Combustion S.p.A.)
- Author in Innovative “Scale Free” Furnace for section rolling mill
Giacomo Venier (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Optimizing Energy Media Consumption and Reducing Greenhouse Gas Emissions in Coil Coating Lines
Francesco Venturi (DUFERCO Group)
- Co-author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Roberto Venturini (Acciaieria Arvedi S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Dirk Verbeken (ArcelorMittal Belgium NV)
- Author in CAESAR HEU project - CirculArity Enhancements by low quality Scrap Analysis and Refinement
Julie Verbrugge (ArcelorMittal Belgium)
- Co-author in Advanced manufacturing and improved performances of hot rolling mill edger rolls (EdgerRolls)
Filippo Verlezza (SMS group)
- Co-author in Innovative Continuous Minimill Technology (CMT®) for sustainable long product production
Deepak Verma (Danieli Corus)
- Co-author in Blast Furnace CO2 Emissions: A Techno-Economic Assessment
Risto Vesanen (Sapotech Oy)
- Author in ADVANCING CONTINUOS CAST SEMI-PRODUCT QUALITY THROUGH A DIGITAL TWIN FRAMEWORK
Mariana Viale (AMI)
- Author in SmartKnB: Artificial Intelligence tools for EAF Optimization
Amanda Vickerfält (Swerim AB)
- Co-author in A Sustainable EAF Slag Practice Based on HYBRIT Laboratory Studies
Maria Beatriz Vieira
- Author in Comparative mineralogical characteristics of different Iron Ores
BERNHARD VIERNSTEIN
- Author in High End Steel Grade Production with Advanced Cooling Technologies - possibilities for AHSS
Andreas Viertauer
- Author in INNOVATIVE APPROACH IN STEELMAKING REFRACTORY APPLICATIONS
Filip Vighagen (RHI Magnesita-Sensors)
- Co-author in Improved EMLI Technology for Early Slag Detection and Enhanced Steel Yield and Quality
Antonella Vignali (Scuola Superiore Sant'Anna - TeCIP Institute - ICT-COISP)
- Co-author in Models for simulating gas and energy management in the transition of integrated steelworks to high hydrogen direct reduction-based processes
Lina Constanza VILLA (ArcelorMittal)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Randolfo Villegas (Arcelormittal)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Cristian Viscardi (ECOTRE Valente srl)
- Author in DIGITAL MANUFACTURING FOR THE DEVELOPMENT OF NEW ROLLING MILL FOR BEAMS
Jorge Visús Pool (Nippon Gases España)
- Co-author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
Bernhard Voglmayr (Primetals Technologies)
- Co-author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
- Co-author in Solid as Iron: Integrated Blast Furnace Control, Optimization, Condition Monitoring, and Simulation
- Co-author in The Pathway to Autonomous Ironmaking
Nicole Voigt
- Author in Globalization cancelled?
Christoph von der Heide (SMS group)
- Co-author in Advancements and future prospects of zero emission galvanizing technologies
Henrik von Schenk
- Author in Development of Digital Tools at HYBRIT's Pilot Plant for H2 Direct Reduction
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Bernhard Voraberger
- Author in Latest Startups and Technology Features for Stainless Steel Production via AOD in Europe
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
- Author in Smelter technology to close the raw material gap in green steel production routes
- Co-author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
Tero Vuolio (University of Oulu)
- Co-author in Determining of iron oxide pellet porosity using image analysis
Johannes Wachlmayr (K1Met GmbH)
- Co-author in A blast furnace tapping simulator to better understand dead man flotation scenarios
Johann Wachlmayr (Austria)
- Author in AI-Powered Cohesive Zone Optimization: Enhancing Efficiency and Stability in Blast Furnaces
Damien Wagner (ArcelorMittal R&D)
- Author in Additional scrap melting capacity with dual-flow post-combustion lance at ArcelorMittal Dunkerque
Damien Wagner
- Co-author in Estimating Reheating Time for Steelmaking Ladles Using Optimization-Based Machine Learning Approach Integrated with a Physical Thermal Model
Raphaël Walger (Fives KEODS)
- Co-author in Case study on product quality management on a continuous galvanizing line thanks to digital solution
Christopher Walker (Hatch Ltd.)
- Co-author in Electric Smelting Furnace Technology for Green Steelmaking
- Co-author in Enhancing Steelmaking Waste Utilization through Electric Smelting Furnace Technology
Phillip Wallat (DfACE Strategy Systems)
- Co-author in Integrating CO₂ Reporting with Physically Consistent Material and Energy Flow Analysis to Improve Circularity of Steel Products
Chao Wang (Shougang Group China)
- Co-author in Advancements and Applications of Steel Coil Transportation Equipment Technology in Modern Steel Strip Plants
Changan Wang (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Songwei Wang (Technology Center, Shanxi Taigang Stainless Steel Co. Ltd.)
- Co-author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
Qiming Wang (Huzhou Yongxing Special Stainless Steel Co., Ltd.)
- Co-author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
Zhixiang Wang (Technology Center, Shanxi Taigang Stainless Steel Co. Ltd.)
- Co-author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
Chuan Wang (Metallurgy department, Swerim AB)
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Co-author in Comparison of direct reduction by CO gas and carbonaceous materials
- Co-author in Optimizing Process Gas Utilization through AI: A Sustainable Energy Solution
Mu Wangzhong (Lulea University of Technology)
- Author in Motion behaviors of non-metallic inclusions at the steel/Ar/slag interfaces considering interfacial physical parameters: an in-situ observation study
Jochen Wans (SMS group)
- Author in Thick Slab Casting Technology for renewable energy produced by windmills
Peter Warren (Binding Solutions Ltd)
- Author in Cold Agglomerated Iron Ore Pellets Industrial Trial – High quality manufacturing and their performance in the Blast Furnace
Jean-Baptiste WAUTERS (JGI-HYDROMETAL)
- Co-author in ZHyRON project: Valorization of iron-rich & Zinc-containing steelmaking by-products via Hydrogen-based Reduction
Stefan Weber (EMG Automation GmbH)
- Co-author in Advanced Coating Thickness Measurement in Electrical Steel Manufacturing with EMG SOLID® DFT
- Co-author in Smarter Galvanizing through Zinc Coating Optimization with EMG iCASS®: A Modular AI-Driven Platform
Andre Weber (Mannstaedt GmbH)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
- Co-author in Towards a Standardized Digital Product Pass for Green Steel: Developing Novel Framework with Real-Time CO₂ Tracking and Secure Data Connectivity for ESPR Compliance
Christoph Weber (University of Duisburg-Essen)
- Author in Enabling Batch Process Flexibility Through Electricity Market Interfaces in Steel Production
Wenjing Wei (ABB)
- Author in Real-Time Iron Ore Quality Optimization in Sintering and Pelletizing Using Integrated Online Analyzer and Advanced Process Control Systems
Fuqiang Wei (Shougang Group China)
- Author in Advancements and Applications of Steel Coil Transportation Equipment Technology in Modern Steel Strip Plants
Martin Weinel (School of Social Sciences, Cardiff University)
- Co-author in Navigating the Automation-Augmentation Paradox: Insights from AI Implementation in a Labor-Intensive Foundry
Robin Weinreich (EMG Automation GmbH)
- Co-author in Smarter Galvanizing through Zinc Coating Optimization with EMG iCASS®: A Modular AI-Driven Platform
Michael Weinzinger
- Author in High Performance Maintenance and Repair for Continuous Casting Machines
Michael Weinzinger
- Author in Harnessing Data Lakes for Global Maintenance Service: Insights and Improvements through Advanced Data Analysis
Bernd Weiss (Primetals Technologies GmbH)
- Author in Optimizing Decarbonization Processes: From Iron Ore to Steel
Christian Weiß (Montanuniversität Leoben)
- Co-author in Electrical conductivity modelling of molten slag based on viscosity data - A mechanistic approach
Martin Welling (Minteq International GmbH)
- Author in Recent Advances in Refractory-Maintenance and Safety for Steel Plants with the help of 3D-Laser-Scanning, Digitalization and Gunning-Robot-Systems
Jesse White
- Co-author in Electrification of heating in steelmaking – an enabler of fossil-free steel
Mark Whitehead (SMS group)
- Author in Utilizing BOF/EAF Energy Recovery for Vacuum Generation in RH and VTD Type Degassers
- Co-author in Advanced fluid flow simulation for the RH process
Ezra Widajat (Hatch)
- Co-author in Burden distribution modeling to diagnose blast furnace operations
Klaus Wiegel
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Jan Wiencke (ArcelorMittal Maizières Research)
- Author in TRANSinter – Sintering process role in the (partial) transition to the Direct Reduction Route
- Co-author in Bio-char production and usage for iron ore pelletization
Matt Wieneke
- Author in Blast Furnace Hearth Relines From Concept to Construction
Hampus Wikmark Kreuger (Swerim AB)
- Author in Laser ultrasonics for microstructure verification of heat treatments and thermal processes (LUMHEAT)
Jan-Olov Wikström (Kaunis Iron AB)
- Co-author in The Role of Pre-Oxidation Degree, Particle Size, and Ore Composition in Optimizing Hydrogen-Based Reduction Efficiency of Magnetite Ores
Jenny Wikström
- Co-author in HYBRIT PILOT PROJECT: NEW SPONGE IRON PRODUCT WITH UNIQUE PROPERTIES
Arndt Wilhelmi (Lechler GmbH)
- Author in Reduction of emissions at casters cooling chamber.
Richard Willemsen (Danieli Corus)
- Co-author in FerSol, the new three-in-one water treatment chemical
Ronald Wilmes (SMS group)
- Author in X-Pact® Solid Control – process optimization, quality control and root cause analysis in case of abnormalities in the cast product
Gerald Wimmer (Primetals Technologies)
- Author in Smelter technology to close the raw material gap in green steel production routes
Johann Josef Winkler
- Author in Reaction behaviour of different carbon sources in FeO containing slags for electric smelting furnaces
Roman Winkler
- Author in The best knows no limits! It’s time to challenge the ESP sequence lengths
Thomas Wirtz (SMS group)
- Co-author in Sustainable repairs of machine parts in rolling mills by advanced coating technologies
Heiko Wolf (PSI Software SE - Process Industries & Metals)
- Co-author in HyMAS: A Hybrid Multi-Agent Framework for Autonomous Steel Production Planning
Jan Wolf (DUMA-BANDZINK GmbH)
- Co-author in Sustainable repairs of machine parts in rolling mills by advanced coating technologies
Uwe Wolf (SSAB Swedish Steel GmbH)
- Co-author in On the influence of EAF based steelmaking on AHSS
Andreas Wolff (VDEh-Betriebsforschungsinstitut | BFI)
- Author in A continuous flow model for long-term production scheduling and reactive replanning.
- Author in DynReAct – An open-source production planning software
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Hanna Wolff (SMS group)
- Author in Energy- and Space-Saving Electrolytic Cleaning with SMS group Pulse Nozzle Technology
Robert Wolff
- Author in Optimisation of roll cooling and descaling processes at Erdemir HSM#2
Ralf Wolters (VDEh-Betriebsforschungsinstitut GmbH)
- Author in Real laboratory ‘H2Stahl’ for hydrogen-based direct reduction
Christian Wuppermann (Department for Industrial Furnaces and Heat Engineering RWTH Aachen University)
- Co-author in TWINGHY - Digital Twins for Green Hydrogen Transition in Steel Industry
Yanping Xiao
- Co-author in 150 tons revert-based briquettes produced and processed in a blast furnace
Yanbin Yang (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Satoki Yasuhara (JFE Steel Corporation)
- Author in Practical Sintering Guidance System: Integrating Data-Driven and Transient Models
Bahar Yildiz Kutman (Institute of Biotechnology, Gebze Technical University, Kocaeli, Turkiye)
- Co-author in Exploring the Potential of Electric-Arc-Furnace Slag in Sustainable Crop Production
Wai Lai Ying (Hatch)
- Co-author in Development of a Handheld Low-Frequency Ultrasonic System for Precise Stave Wear Measurement in Blast Furnaces
Chae Yeon Yoo (Hyundai-steel)
- Co-author in Development of Oxygen-fuel Burner Design for Electric Arc Furnaces under Supersonic Flow Conditions
Hong-Jae Yoo (Dong-A University)
- Author in Study of the reduction of a hematite pellet by CO-H2 mixture gas
SOSHI YOSHIMOTO (JFE Steel Corporation)
- Author in Study on shape defects of thin steel sheets caused by steep longitudinal temperature gradient
Han Yu (Swerim)
- Author in Optimizing Process Gas Utilization through AI: A Sustainable Energy Solution
- Author in Recent achievements of Industrial Symbiosis in the steel sector based on the Symbio-Steel project
- Co-author in Predicting the risk of surface defects in continuous casting with advanced measurements and artificial intelligence
Yingyan Yu (Matplus GmbH)
- Co-author in Digitalization of Material Properties Across the Entire Process Chain
- Co-author in Integrating CO₂ Reporting with Physically Consistent Material and Energy Flow Analysis to Improve Circularity of Steel Products
Daeho Yun (Hyundai Steel Company)
- Author in A Study on enhancing accuracy of AI-based RDT automatic control in hot rolling process
Michael Yynnycky (University of Limerick)
- Co-author in Metallic Elements Dissipation Avoided by Life cycle design for Steel – MEDALS project
Antonella Zaccara (Scuola Superiore Sant'Anna; Università di Padova)
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
- Co-author in Artificial Intelligence-based decision support system for optimizing the ladle furnace process in the ALCHIMIA project
- Co-author in Life Cycle Assessment for the electric steelmaking route in the ALCHIMIA project
Nicoletta Zacchetti (RINA-Centro Sviluppo Materiali SpA)
- Author in Effects on steel oxidation kinetics and oxide scale features of hydrogen combustion
Massimiliano Zampa (Danieli & C. Officine Meccaniche S.p.A.)
- Author in Flexible pathways for green iron production
Alessandro Zamproni (Tenova S.p.A.)
- Author in AI-Powered IT Infrastructure for Enhanced Safety in EAF Operations
Lorenzo Zanaboni (Acciaieria Arvedi S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Silvia Zanlucchi (Rina Consulting Centro Sviluppo Materiali)
- Author in Effects on steel oxidation kinetics and oxide scale features of hydrogen combustion
Umberto Zanusso (SMS group)
- Author in SMS ZERO2Flame HY2 burner for reheating furnaces
Michael Andreas Zarl (K1-Met GmbH)
- Co-author in Advancing hydrogen plasma smelting reduction: Experimental insights from a demonstration plant
- Co-author in Advancing Hydrogen Plasma Smelting Reduction: Process Simulation and technical and environmental assessment
- Co-author in Hydrogen plasma smelting reduction of Cr2O3/Chromite: the first step to direct and sustainable production of stainless steel
Luca Zecchinato (Tenova SpA)
- Author in EAF waste gas cleaning through iRecovery® system and CataFlex™
Heinz Zechner (PSI Metals)
- Author in Global-Local Order Dressing: How Steel Producers Can Use Product Configuration and Rule-Based Engines to Generate Production Orders
Matthias Zechner (Steeltec AG)
- Co-author in Innovative Method for Scanning an Electric Arc Furnace and Digital Twin-Based Simulation of the Tapping Process
Yuyou ZHai
- Author in FROM DATA TO DECISION: UNIFYING PRODUCTION MANAGEMENT AND TPQC FOR OPTIMIZED STEEL PRODUCTION
Yandong Zhai (Åbo Akademi University)
- Author in Computational Analysis of Means to Enhance Hydrogen-Based Direct Reduction in Shaft Furnaces
Jinwen Zhang (Technology Center, Shanxi Taigang Stainless Steel Co. Ltd.)
- Co-author in Characteristics and Control of Oxide–Sulfide Complex Inclusions in D2 High-Speed Railway Wheel Steel
ZHI ZHANG (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
Yanling Zhang (State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing)
- Co-author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
Jilai Zhang (Hatch Ltd.)
- Author in Pathways for Sustainable Hot Metal Production from DRI to Support Green Steel Production
Jian Zhang (Shougang Group China)
- Co-author in Advancements and Applications of Steel Coil Transportation Equipment Technology in Modern Steel Strip Plants
Jiangtao Zheng (Shougang Group China)
- Co-author in Advancements and Applications of Steel Coil Transportation Equipment Technology in Modern Steel Strip Plants
Guanwei Zhou (Åbo Akademi University)
- Co-author in Multi-agent-based approach for decreasing carbon footprint of future integrated steelworks: the AgiFlex overall concept
Mengjie Zhou (State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing)
- Co-author in Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Super304H Stainless Steel
Kangying ZHU (ArcelorMittal Global R&D Maizières)
- Author in MetConZero: Metallurgical Consequences of Zero Carbon Steelmaking
Chiara Zitelli (Rina Consulting - Centro Sviluppo Materiali S.p.A.)
- Author in Performance of a HSLA steel produced via EAF and ESP® process route for the service in gaseous hydrogen
Milan Zlatkovikj (Hybrit Development AB)
- Co-author in Development of Digital Tools at HYBRIT's Pilot Plant for H2 Direct Reduction
Zairong Zong (BAOSHAN IRON&STEEL CO. LTD)
- Author in On The Performance of Implementing Pre-conditioned Oxide Film of HSS Rolls in A Hot Strip Mill
ANNA ZOPPIROLLI (POLYTEC SPA)
- Co-author in A customizable robotic for maintaining the ladle sliding gate
- Co-author in Advanced robotic system for automated plate processing: precision, efficiency, and seamless integration
- Co-author in Enhancing quality control for Long Products with robotics and computer vision
- Co-author in Human-free casting operation. Safety and efficiency increase thanks to robotization and artificial vision
- Co-author in Safer Electric Melting: How robotics is transforming the EAF steel production
- Co-author in Smart robotic system for scrap sorting
Asier Zubero Lombardia (Sidenor Aceros Especiales)
- Author in Simulating the use of renewable and alternative Carbon-bearing materials and hydrogen in the Electric Arc Furnace through a flowsheet model
Tommaso Zulian (politecnico di milano)
- Co-author in Development of Functional Graded Materials through Sintering of Layered Metal Powders

Choose timezone

7th European Steel Technology and Application Days - ESTAD 2025

Contact